Addressable Fire Alarm Ancillary from Reputable Brands
We have the very latest ancillary devices that are compatible with a huge range of Addressable Fire Alarm Systems products can all be found here at J K Fire.
-
4 cable entry holes suitable for cable glands (2 glands supplied) Colour matched to both ivory and white detector ranges Approved Sensor and Base range Provides moisture and dust resistant fixing Ideal for bulk-head fixing Approved by LR and GL Non-marine use version available (SBB-2)
-
-
-
-
Key Features:; NMEA 0183 message format RS485 data connection to VDR Heartbeat sent every 30 seconds Small board profile Panel powered Low current consumption
-
Key Features:; Loop Powered Single Address 2 Independently Controlled Changeover relays Relays Contact Rated at 30 V dc at 1 amp Auxiliary Monitored Input "Smart-Fix" Housing System for flexibility Features an integral SCI Approved to MED by GL GL Type approval Approved by LPCB
-
Single Loop Address Loop Powered 2 Independent Inputs for Monitoring of Volt Free Contacts Each Input can be configured to monitor either Normally Open or Normally Closed contacts "Smart-Fix" Housing System for flexibility Features an integral SCI Approved to MED by GL GL Type Approval Approved by LPC
-
Loop Powered with Single Loop Address Up to 6 Conventional Detectors Remote LED Output Fully Monitored for Short and Open Circuit Faults "Smart-Fix" Housing System for flexibility Features an integral SCI Approved to MED by GL GL Type approval Approved by LPCB
-
Single loop address Each alarm circuit fused at 1 amp Two independent sounder circuits, each fully monitored for open and short circuit faults Auxiliary monitored input Outputs can be driven continuously or synchronised pulsed sounder drive "Smart-Fix" housing system for flexibility Features an integral SCI Approved to MED by GL GL Type approval Approved by LPCB
-
Detects wiring short-circuits using patented technology Minimises disruption from short-circuits Automatic de-isolation on short-circuit removal Up to 20 detectors or equivalent load may be installed between isolators
-
Operation:; It can report fault, switch open and switch closed levels Three visible LEDs Capable of switching up to 8A at 250V AC Fits a standard 35mm DIN-Rail
-
Capable of switching up to 30V at 1A Fits onto a standard 35mm DIN-Rail
-
Key Features:; Enables sounders to be operated continuously or to be pulsed, one second on, one second off May be synchronised when in pulsed operation External supply monitoring Will accept a load of 8 Amperes
-
Designed for use where space is limited Isolated as standard Interrupt/non interrupt in one unit ‘Pre-alarm’ status available Three coloured LEDs giving clear status indication
-