Description
Talentum Single IR Flame and Spark Detector 16580
The Talentum® Single Infra-Red (IR) Spark Detector responds to low frequency (1 to 15 Hz.) flickering IR radiation emitted from sparks and other hot objects during combustion. IR flame flicker techniques enable the sensor to operate through a layer of oil, dust, water vapour, or ice. Most IR spark sensors respond to 4.3?m light, emitted by hydrocarbons.
By responding to 1.0 to 3.0?m light emitted by sparks, early stage fires can be rapidly detected. The single IR photoelectric detector responds to IR wavelengths, emitted from glowing embers and sparks and is ideal for these applications. The combination of filters and signal processing allows the sensor to be used without risk of false alarms on dark machinery and ductwork.
Key Features:
Fast response time for enclosed and dark areas
High Sensitivity to Embers
Selectable Output Options; Conventional 2 wire, 4-20mA, Relay Contacts (Fire/Fault, Pre-alarm – Latching or Non-latching)
Selectable Response Speed
Remote Control Self-Test
Low Power Consumption
Die cast zinc alloy housing
Ideal for use on machinery protection applications
Continues operation at temperatures up to 55°C
Applications:
Agriculture
Bed Fillings
Chipboard/MDF Manufacture
Dryers
Dust Collection/Filters
Textiles
Paper Production
Woodworking; Talentum Spark Detector – Data Sheet
Spark detection – Where, when and why?
Talentum – One detector for every application
