-
Product Description The Edwards EST F-DACT is a digital alarm communicator transmitter for use with F-series fire alarm control panels. The F-DACT can be programmed to operate as a single or dual line DACT/Modem/LCD display, a Modem/LCD display, or an LCD display only. -
Product Description The Edwards EST / GE F-XTR120 NAC Power Expander Transformer is intended for use with 10-zone, 120VAC F-Series fire alarm control panels. p/n 3101035
-
Product Description This is the replacement board for the EST Fireshield FS1004 (10-zone) fire alarm control panel; supports 10 initiating device circuits and 4 notification appliance circuits. Panel is configured for Class B operation. Can be converted to Class A by using two Class B circuits to make one Class A circuit. COMPATIBLE (OPTIONAL) ACCESSORIES: — Remote System Indicator (FSRSI) — Remote Zone Indicator (FSRZI-A) — Remote Relay Module (FSRRM) — Power Expander Transformer (XTR3A120, XTR3A230) — DACT (Dialer)/Modem (FSDACT) — City Tie Module (CTM4.7) — Reverse Polarity Module (RPM) — Battery Cabinet (BC-2)
-
Product Description The Edwards EST FS1004RD FireShield is a 10-Zone conventional FACP with FSDACT. Supports 10 IDCs and 4 NACs. Red Cabinet enclosure included.
-
Product Description The Edwards EST FSAT3 is a Remote Annunciator Wall Plate, Three Gang (White) for use with FSRSI and FSRZI-A Remote Annuciators.
-
-
Product Description NOTE: This part is discontinued by the manufacturer. No direct replacement recommended. The Edwards EST FSP502GD FireSheild Plus (FACP) is a Conventional Fire Alarm Control Panel – 5 Class B IDCs and 2 Class B NACs (Pairs of IDCs and NACs convertible to single Class A circuits) 120VAC operation "GD" = Includes Grey Cabinet and Dialer
-
Product Description NOTE: This part is discontinued by the manufacturer. No direct replacement recommended. The Edwards EST FSP502R FireSheild Plus (FACP) is a Conventional Fire Alarm Control Panel – 5 Class B IDCs and 2 Class B NACs (Pairs of IDCs and NACs convertible to single Class A circuits) 120VAC operation "R" = Red Cabinet
-
-
Product Description The Edwards EST G1-HDVM is a white multi-candela Horn Strobe for wall mounting, 24VDC
-
Product Description Edwards EST G1-P is a white 24VDC Genesis Steady Horn designed for wall mounting. COMPATIBLE ACCESSORIES: — 27193-16 One-gang Surface Mount Box (white) — G1T Genesis Trim Plate for 2-gang or 4" square boxes (white) — G1T-FIRE Genesis Trim Plate with “FIRE” markings for 2-gang or 4" square boxes (white) — G1T-SB Surface box used for surface mounting (white) NOTE: The G1-P is not compatible with Genesis Signal Master.
-
Product Description Edwards EST G1-VM Genesis Multi-CD Strobe features selectable 15, 30, 75, or 110 cd output. VOLTAGE: non-coded, filtered 16 - 33 Vdc or unfiltered 16-33 Vdc FWR COMPATIBLE SYNCHRONIZATION MODULES: —G1M Genesis Signal Master — Snap-on Mount —G1M-RM Genesis Signal Master — Remote Mount (1-gang) —SIGA-CC1S Intelligent Synchronization Output Module (2-gang) —SIGA-MCC1S Intelligent Synchronization Output Module (Plug-in UIO)
-
-
-
Product Description Edwards EST G1F-HDVM Multi-candela Genesis Horn Strobe Selectable 15, 30, 75, or 110 cd output Selectable high/low dB output COMPATIBLE SYNCH MODULES — G1M Genesis Signal Master — Snap-on Mount 0.2 (0.1) — G1M-RM Genesis Signal Master — Remote Mount (1-gang) — SIGA-CC1S Intelligent Synchronization Output Module (2-gang) 0.5 (0.23) — SIGA-MCC1S Intelligent Synchronization Output Module (Plug-in UIO)
-
Product Description Edwards EST G1F-VM Genesis Strobe Selectable 15, 30, 75, or 110 cd output COMPATIBLE SYNCH MODULES — G1M Genesis Signal Master — Snap-on Mount 0.2 (0.1) — G1M-RM Genesis Signal Master — Remote Mount (1-gang) — SIGA-CC1S Intelligent Synchronization Output Module (2-gang) 0.5 (0.23) — SIGA-MCC1S Intelligent Synchronization Output Module (Plug-in UIO)
-
Product Description Edwards / EST G1M Genesis Signal Master is a dual-purpose module that provides precision synchronization for connected strobes, and independent control for connected Genesis horns, over a single pair of wires. Only one module required per circuit. This module is compatible with Genesis, Enhanced Integrity (synchronized), Enhanced Integrity Power Saver (synchronized), and Signature Audible Detector bases.
-
Product Description Edwards G1M-RM Genesis Signal Master Remote is a dual purpose module that provides precision synchronization for connected strobes, and independent control for connected Genesis Series horns, over a single pair of wires. COMPATIBLE HORN/STROBES: —Genesis —Enhanced Integrity (synchronized) —Enhanced Integrity Power Saver (synchronized) —Signature Audible Detector Bases
-
-
Product Description The Edwards EST G1R-HDVM Multi-candela Horn-Strobe provides independent horn control provided over a single pair of wires. Selectable 15, 30, 75 or 110 cd output Selectable high/low dB output. Wall mount. Fits all standard one-gang electrical boxes.
-
Product Description Edwards EST G1R-VM Multi CD Strobe
-
Product Description The Edwards EST G1RF-C Genesis Chime Genesis Chime is designed for indoor use, wall mounted. 24VDC
-
Product Description Genesis Chime-Strobe (selectable 15, 30, 75, or 110 cd output, selectable high/low dB output) Red with “FIRE” marking Operating voltage: G1-CVM series chime-strobes: non-coded, filtered 16-33 Vdc or unfiltered 16-33 Vdc FWR (or coded (audible NAC only) when used with optional G1M Genesis Signal Master.
-
Product Description Edwards EST G1RF-HD is a Temporal Fire Alarm Horn 24VDC, Red
-
Product Description Edwards EST G1RF-HDV1575 Genesis Horn Strobe Operating voltage: filtered 16 - 33 Vdc or unfiltered 16-33 Vdc FWR 15/75 strobe candela Horn: Temporal hi/lo dB-24V
-
Product Description EST G1RF-HDVM Multi-candela Horn-Strobe features a selectable 15 cd, 30 cd, 75 cd, or 110 cd output. Operating voltage: 16-33 VDC Horn temporal rate synchronized with optional G1M Genesis Signal Master or G1M-RM Genesis Signal Master Remote. COMPATIBLE STROBE SYNCHRONZATION SOURCES: — SIGA-CC1S — SIGA-MCC1S — SIGA-CC2A — SIGA-MCC2A, — G1M-RM — BPS6A — BPS10A — APS6A — APS10A — iO64 — iO500 — Fireshield Plus 3, 5 and 10 zone FACPs. Wall mount only: flush 2½ inch (64 mm) deep one-gang box
-
Product Description Edwards EST G1RF-V1575 Genesis Strobe, 15/75 strobe candela Operating voltage: filtered 16 - 33 Vdc or unfiltered 16-33 Vdc FWR
-
Product Description The Edwards EST G1RF-VM is a selectable (15, 30, 75, or 110cd) multi-candela strobe. Operating voltage: 16-33 VDC COMPATIBLE SYNCHRONZATION SOURCES: — SIGA-CC1S — SIGA-MCC1S — SIGA-CC2A — SIGA-MCC2A, — G1M-RM — BPS6A — BPS10A — APS6A — APS10A — iO64 — iO500 — Fireshield Plus 3, 5 and 10 zone FACPs. Wall mount only: flush 2½ inch (64 mm) deep one-gang box
-
Product Description The Edwards EST G1RT is a Red Trim Plate for use with Genesis Notification Appliances.
-
Product Description The Edwards EST / GE G1WA-VMA M is a White Multi-Candela Horn Strobe with Amber Lens.
-
Product Description The Edwards EST G1WN-VMA is a Genesis Horn Strobe, Amber Lens (White) for wall mounting. COMPATIBLE — 27193-16 white single-gang surface mount box
-
Product Description The Edwards EST Genesis G4-S2 is a 25 volt speaker. Color: white. For indoor use only, wall-mounted to standard 4” square box, 2 1/8” (54 mm) deep.
-
Product Description The Edwards EST G4-S7 is a white Speaker for wall mounting, 70 Vrms The speaker includes a field configurable switch for selecting the desired wattage (2 W, 1 W, 1/2 W, or 1/4 W) . Mounts to 4" square electrical box.
-
Product Description Edwards EST G4B Surface Back Box (White) NOTE: Replaces MG4B, XLSG4B, G4B-LG, ADTG4B, EG4B, ZG4B
-
Product Description Edwards EST G4F-S7 Genesis Speaker Operating voltage: 25 Vrms (model S2), 70 Vrms (model S7) Mounts to: North American 4 in square electrical box, 2-1/8 in deep
-
Product Description The Edwards EST G4HFRF-S7VMC is a red Genesis G4 Speaker Strobe designed for wall mounting. High Fidelity Speaker 520Hz; 70V (Selectable ¼, ½, 1, or 2 watt) Strobe selectable 15, 30, 75, or 110 candelas
