-
Key Features: Sensitive to flickering IR radiation Detects through films of oil, dust, water and ice Responds to flickering flames, including those invisible to the naked eye Compatible with Discovery and XP95 protocols Remote optical self-test function 90 field of view Up to 40m coverage -
The Flame Detector Weather Shield protects the device from inclement conditions. Key Features Protects against water ingress Protects sensor from direct sunlight
-
Key Features Protects against water ingress Protects sensor from direct sunlight
-
The Flame Detector Bracket is an optional accessory for the Intelligent Flame Detectors. It is a stainless steel mounting bracket adjustable in two axis. Not suitable for Base Mounted Flame Detectors. Key Features: Allows flame detector to be mounted in any orientation.
-
Key Features: Continually corrects itself against building movement Controlled and adjusted from ground level Use XP95 Switch Monitor to interface it to an addressable loop
-
Key Features ATEX certified IECEx certified
-
Key Features: ATEX Certified: II 2 G D CENELEC/IEC Certified: EEx d - IIC T6- (Zones 1, 21, 2 and 22) Class 1 sensitivity to EN54-10 detects 0.1m2 fires at 25m Highest optical interference immunity Selectable output options: Conventional two-wire, 4-20mA, Relay Contacts - Fire/Fault, Pre alarm, Latching or Non-latching Selectable response speed Remote control self-test Low power consumption IP66 rated Supply voltage 14 to 30Vdc Operating temperature -10C to +55C
-
Key Features: ATEX & IECEx certified: II2GD Ex d IIC T4 Gb Ex tb IIICT135 ?C Db IP66 A21 (Zones 1, 21, 2 and 22) Selectable output options: Conventional two-wire, 4-20mA, Latching or Non-latching, Relay Contacts - Fire/Fault, Pre alarm Class 1 sensitivity to EN54-10 detects 0.1m2 fire at 25m High optical interference immunity Selectable response speed Optical self-test Low power consumption IP66 rated Supply voltage 14 to 30Vdc Operating temperature -10C to +55C
-
Key Features: ATEX & IECEx certified: II2GD Ex d IIC T4 Gb EE tb IIICT135 ?C Db IP66 A21 (Zones 1, 21, 2 and 22) Selectable output options: Conventional two-wire, 4-20mA, Latching or Non-latching, Relay Contacts - Fire/Fault, Pre alarm Class 1 sensitivity to EN54-10 detects 0.1m2 fire at 25m High optical interference immunity Selectable response speed Optical self-test Low power consumption IP66 rated Supply voltage 14 to 30Vdc Operating temperature -10C to +55C
-
Key Features: Four pre-set message pairs Capable of up to 15 tone message pairs Low current and high volume Fully synchronised Set up and test at point of installation
-
Key Features: Four pre-set message pairs Capable of up to 15 tone message pairs Low current and high volume Fully synchronised Set up and test at point of installation
-
Key Features: Approved for use in the marine environment Five response modes for environmental adaptation Day/night switching for increased flexibility Drift compensation for false alarm reduction User programmability for data XPERT card addressing for increased security
-
Key Features: Resettable operating element Easy access, front reset mechanism Front facing accessible addressing for commissioning Ergonomic reset key and keyring hole Flashing Poling LED Option 170 viewable LED indicator
-
Key Features: It is possible to set individual control of the sounder and visual indicator Volume and tone settings can be selected from the control panel Electronic bell tone IMO 1A tone included
-
Key Features: Flashing LED option to indicate polling (Discovery systems only) Plug and Play terminal connections for fast wiring Continuity link for wiring test before commissioning Reports an alarm in under 0.2 seconds Resettable element
-
Apollo Discovery Manual Call Point A seven-segment DIL switch enables addressing of each call point at commissioning stage. When operated, the manual call point interrupts the polling cycle for a fast response. Bi-coloured LEDs indicate isolate and normal conditions.
-
Key Features: Individual control of the sounder and visual indicator Volume and tone settings can be selected from the control panel Tones can be used for other purposes in addition to warning of fire, making the device ideal for use in schools etc Soft start option, ideal for hospitals and nursing homes Group and global control for increased response time
-
Key Features Allows multiple Interfaces to be housed together IP67 Rated
-
Key Features: Selectable output options: Conventional two-wire, 4-20mA, Latching or Non-latching, Relay Contacts - Fire/Fault, Pre alarm Class 1 sensitivity to EN54-10 detects 0.1m2 fire at 25m High optical interference immunity Selectable response speed Optical self-test Low power consumption IP65 rated Supply voltage 14 to 30Vdc Operating temperature -10C to +55C Operating temperature -10C to +55C
-
Key Features: Selectable output options: Conventional two-wire, 4-20mA, Latching or Non-latching, Relay Contacts - Fire/Fault, Pre alarm Class 1 sensitivity to EN54-10 detects 0.1m2 fire at 25m High optical interference immunity Selectable response speed Optical self-test Low power consumption IP65 rated Supply voltage 14 to 30Vdc Operating temperature -10C to +55C
-
Key Features Enables compliance with the ATEX directive
-
Key Features: Red LED indicator 'Plug and Play' terminal connections for fast wiring Resettable element
-
Key Features: Sounder range between 70dB(A) and 87dB(A) Detects the removal of a detector head and reports a fault Continues to work during unauthorised removal of detectors Quick and simple installation
-
Brand Features: Flexible Reliable Cost-effective Compliant with BS 5839 Easy to install Easy to extend Product Information The AlarmSense Optical Smoke Detector works using the light scatter principle. The detector changes to alarm state at a pre-set threshold of smoke penetration into the sensing chamber. Key Features: Responds well to slow-burning, smouldering fires Well suited for bedrooms and escape routes 360C visibility of LEDs Reduces false alarms Quick and simple installation
-
Key Features: Sound output of up to 99dB LPCB approved Separate first-fix base for ease of installation IP65 rated (outdoor use) Designed for use as part of an AlarmSense fire alarm panel system Wall mounted Tone synchronisation Monitors the presence of the sounder head
-
Key Features: Plug and Play terminal connections for fast wiring Continuity link for wiring test before commissioning Reports an alarm in under 0.2 seconds Resettable element
-
Key Features ATEX certified IECEx certified GOST-R certified for Zone 0 applications FM certified for Class I Division 1 and Class I Zone 0 applications
-
Key Features ATEX certified IECEx certified GOST-R certified for Zone 0 applications FM certified for Class I Division 1 and Class I Zone 0 applications
-
Key Features: fitted with a bi-directional short circuit isolator unaffected by loop short circuits
-
Key Features: 4 pre-set message pairs, capable of up to 15 tone message pairs Low current and high volume Fully synchronised Set up and test at point of installation
-
Key Features: 4 pre-set message pairs, capable of up to 15 tone message pairs Low current and high volume Fully synchronised Set up and test at point of installation
-
Key Features: 15 tone pairs It is possible to set individual control of the sounder and visual indicator Volume and tone settings can be selected from the control panel Tones can be used for other purposes in addition to warning of fire, making the device ideal for use in schools etc. Soft start option, ideal for hospitals and nursing homes Group and global control for increased response time
-
Key Features: Approved for use in the marine environment Five response modes for environmental adaptation Day/night switching for increased flexibility Drift compensation for false alarm reduction User programmability for data XPERT card addressing for increased security Ideal in environments that are dirty or smoky Unaffected by wind or atmospheric pressure Remote test feature
-
Key Features: Improved design for ease of wiring meaning faster installation Contains controllable isolator Address range 1 - 254 Five pre-configured modes, including compatibility mode from XP95/Discovery to CoreProtocol systems Priority mode for first response Configurable input styles Earth fault monitoring
-
Key Features: Improved design for ease of wiring meaning faster installation Contains controllable isolator Address range 1 - 254 Nine pre-configured modes, including compatibility mode from XP95/Discovery to CoreProtocol systems Failsafe mode (meets BS 7273-4 requirements) Configurable input styles Earth fault monitoring
-
Key Features: Improved design for ease of wiring meaning faster installation Contains controllable isolator Address range 1 - 254 Five pre-configured modes, including compatibility mode from XP95/Discovery to CoreProtocol systems Configurable input styles Earth fault monitoring
