-
Product Description Edwards EST G4RF-S7VM Speaker-Strobe -
Product Description Edwards EST G4WA-S2VMC 25V white strobe with clear lens
-
Product Description The Edwards EST G4WA-S7VMA 70V multi-candela Speak Strobe (White) marked "ALERT" is not intended for use as a Fire Alarm Notification Appliance.
-
Product Description The Edwards EST GC-S7VM is a White Speaker Strobe 70 Vrms, Speaker response: 400 to 4,000 Hz 15 to 95 multi-candela
-
Product Description The Edwards EST GCF-HDVMH is a Genesis Horn-Strobe with selectable 95, 115, 150, or 177 cd output. Marked: FIRE. For wall or ceiling mounting.
-
Product Description Edwards EST GSA-CT2 Vigilant Dual Input Module mounts to standard North American 1-gang electrical boxes. Separate I/O and data loop connections are made to each module. For use with the Signature Loop Controller.
-
Product Description Edwards EST GSA-M270 Vigilant Fire Alarm Pull Station is designed for use with GE's Signature Loop Controller. Single action w/ optional breakable glass rod. Electronic addressing: Permanently stores programmable address; there are no switches or dials to set. Addresses are downloaded from a PC, or the SIGA-PRO Signature Program/Service Tool.
-
Product Description Edward Est GSA-WTM Vigilant Waterflow / Tamper Module is part of Vigilant’s Signature Series system. For use with the Signature Loop Controller.
-
Product Description Edwards EST LSRA-232 Programming Port t is an optional port board for LSRA annunciators, providing a connection to the host system or a local printer, and to allow programming by downloading data into the annunciator. PC connection requires Modular Cable (P/N 360163) and Adaptor (P/N 240506 or P/N 240507) sold separately.
-
Product Description Edwards EST LSS-PS Auxiliary Power Supply for the LSS4/12/36/52 panels.
-
Product Description This is the power supply for the LSS1 Conventional 4-zone FACP.
-
Product Description Edwards EST LSS1 CPU is the Replacement Board for the LSS1 Conventional 4 zone FACP. Features 2 Class A or Class B bell circuits
-
Product Description Edwards EST LSS1 CPU is the Replacement Board for the LSS1 Conventional 4 zone FACP. Features 2 Class A or Class B bell circuits Includes Power Supply.
-
Product Description This is the replacement board for an Edwards EST LSS4 Fire Alarm Control Panel w/ Power Supply Supports an optional PC based configuration program.
-
Product Description Edwards EST LSS4 Power Supply p/n 140219
-
Product Description Edwards EST LSS4-12 8 Zone Expander Board
-
Product Description NOTE: This part is discontinued by the manufacturer. Replace with: M500SF Supervised Control Module The Edwards EST M500CFS is an Addressable Control Module.
-
Product Description Edwards EST MPSR2-SHTW-GE is a Weatherproof Double-Action Manual Pull Station. Features: SPST contacts, Hex Screw Reset, Terminal Connections Includes backbox.
-
Product Description Edwards EST PS6 Power Supply
-
Product Description Edwards EST PS6 Power Supply for QS4 panel.
-
Product Description Edwards RLCD LCD Annunciator w/o Communication Controls New in sealed package.
-
Product Description The Edwards EST RQSC-CPU-1 Annunciator is designed for use with QuickStart FACPs.
-
Product Description The Edwards EST (R)QSC-CPU-2 QuickStart Annunciator Conventional CPU/Display is designed for use with QuickStart FACPs. Two annunciator option spaces.
-
Product Description The Edwards EST SA-TCS-6 Portable Handset Storage Cabinet is designed for surface mounting; includes keylock. Red finish with white lettering: “Emergency Telephone Handsets”
-
Product Description Edwards EST SIGA-DG Detector Guard
-
Product Description NOTE: This part is discontinued by the manufacturer. Replace with: SIGA-HRD The Edwards EST SIGA-HRS Heat Detector is a combination 15°F per minute Rate-of-Rise, and 135°F (57°C) Fixed-Temperature Heat Detector. Edwards EST SIGA-HRS detectors are compatible only with Signature Loop Controller. COMPATIBLE BASES and ACCESSORIES: — SIGA-SB Detector Mounting Base - Standard — SIGA-SB4 4-inch Detector Mounting Base w/ SIGA-TS4 Trim Skirt — SIGA-RB Detector Mounting Base w/Relay — SIGA-RB4 4-inch Detector Mounting Base w/Relay w/ SIGA-TS4 Trim Skirt — SIGA-IB Detector Mounting Base w/Fault Isolator — SIGA-IB4 4-inch Detector Mounting Base w/ Fault Isolator and SIGA-TS4 Trim Skirt — SIGA-LED Remote Alarm LED. (Connects to the SIGA-SB or SIGA-SB4 Standard Base only.) — SIGA-AB4G Audible (Sounder) Base for Fire Detectors — SIGA-AB4GT Audible (Sounder) Base for CO and Fire Detectors — SIGA-TCDR Temporal Pattern Generator — SIGA-CRR Polarity Reversal Relay can be used for sounding to other audible bases on the same 24 Vdc circuit. — SIGA-TS4 Trim Skirt (supplied with 4-inch bases) — SIGA-DMP Detector Mounting Plate — SIGA-RTA Detector Removal Tool — SIGA-VA Detector Cleaning Tool NOTE: This part replaces SIGA2-HRS and SIGA-HRD.
-
Product Description NOTE: This part is discontinued by the manufacturer. The EST SIGA-IPHS Intelligent 4D Multisensor Detector is a combination Ionization, Photoelectric, and Thermal Boost Type Smoke Detector. EST SIGA-IPHS detectors are compatible only with Signature Loop Controller. COMPATIBLE BASES and ACCESSORIES: — SIGA-SB Detector Mounting Base - Standard — SIGA-SB4 4-inch Detector Mounting Base w/ SIGA-TS4 Trim Skirt — SIGA-RB Detector Mounting Base w/Relay — SIGA-RB4 4-inch Detector Mounting Base w/Relay w/ SIGA-TS4 Trim Skirt — SIGA-IB Detector Mounting Base w/Fault Isolator — SIGA-IB4 4-inch Detector Mounting Base w/ Fault Isolator and SIGA-TS4 Trim Skirt — SIGA-LED Remote Alarm LED. (Connects to the SIGA-SB or SIGA-SB4 Standard Base only.) — SIGA-AB4G Audible (Sounder) Base for Fire Detectors — SIGA-AB4GT Audible (Sounder) Base for CO and Fire Detectors — SIGA-TCDR Temporal Pattern Generator — SIGA-CRR Polarity Reversal Relay can be used for sounding to other audible bases on the same 24 Vdc circuit. — SIGA-TS4 Trim Skirt (supplied with 4-inch bases) — SIGA-DMP Detector Mounting Plate — SIGA-RTA Detector Removal Tool — SIGA-VA Detector Cleaning Tool
-
Product Description NOTE: This part is discontinued by the manufacturer. Replace with: SIGA-PHD. Edwards EST SIGA-PHS Intelligent 3D Multisensor Detector is a combination Photoelectric Smoke and Fixed-Temperature Heat Detector, compatible only with EST’s Signature Loop Controller. COMPATIBLE BASES and ACCESSORIES: — SIGA-SB Detector Mounting Base - Standard — SIGA-SB4 4-inch Detector Mounting Base w/ SIGA-TS4 Trim Skirt — SIGA-RB Detector Mounting Base w/Relay — SIGA-RB4 4-inch Detector Mounting Base w/Relay w/ SIGA-TS4 Trim Skirt — SIGA-IB Detector Mounting Base w/Fault Isolator — SIGA-IB4 4-inch Detector Mounting Base w/ Fault Isolator and SIGA-TS4 Trim Skirt — SIGA-LED Remote Alarm LED. (Connects to the SIGA-SB or SIGA-SB4 Standard Base only.) — SIGA-AB4G Audible (Sounder) Base for Fire Detectors — SIGA-AB4GT Audible (Sounder) Base for CO and Fire Detectors — SIGA-TCDR Temporal Pattern Generator — SIGA-CRR Polarity Reversal Relay can be used for sounding to other audible bases on the same 24 Vdc circuit. — SIGA-TS4 Trim Skirt (supplied with 4-inch bases) — SIGA-DMP Detector Mounting Plate — SIGA-RTA Detector Removal Tool — SIGA-VA Detector Cleaning Tool NOTE: This part replaces SIGA2-PHS for applications that do not require split photo/heat operation.
-
Product Description NOTE: This part is discontinued by the manufacturer. Replace with: SIGA-PD The Edwards EST SIGA-PS Intelligent Photoelectric Smoke Detectors is part of the Signature Series Detection and Alarm equipment from Edwards / EST. The Edwards EST SIGA-PS is compatible for use only with EST’s Signature Loop Controller. Uses one Device Address. COMPATIBLE BASES and ACCESSORIES: — SIGA-SB Detector Mounting Base - Standard — SIGA-SB4 4-inch Detector Mounting Base w/ SIGA-TS4 Trim Skirt — SIGA-RB Detector Mounting Base w/Relay — SIGA-RB4 4-inch Detector Mounting Base w/Relay w/ SIGA-TS4 Trim Skirt — SIGA-IB Detector Mounting Base w/Fault Isolator — SIGA-IB4 4-inch Detector Mounting Base w/ Fault Isolator and SIGA-TS4 Trim Skirt — SIGA-LED Remote Alarm LED. (Connects to the SIGA-SB or SIGA-SB4 Standard Base only.) — SIGA-AB4G Audible (Sounder) Base for Fire Detectors — SIGA-AB4GT Audible (Sounder) Base for CO and Fire Detectors — SIGA-TCDR Temporal Pattern Generator — SIGA-CRR Polarity Reversal Relay can be used for sounding to other audible bases on the same 24 Vdc circuit. — SIGA-TS4 Trim Skirt (supplied with 4-inch bases) — SIGA-DMP Detector Mounting Plate — SIGA-RTA Detector Removal Tool — SIGA-VA Detector Cleaning Tool
-
Product Description NOTE: This part is discontinued by the manufacturer. Replace with: SIGA-PCD The Edwards EST Signature Series SIGA2-PCOS Intelligent Photoelectric Detector with carbon monoxide sensor is compatible for use with the Signature Loop Controller. COMPATIBLE BASES and ACCESSORIES: — SIGA-SB Detector Mounting Base - Standard — SIGA-SB4 4-inch Detector Mounting Base w/ SIGA-TS4 Trim Skirt — SIGA-RB Detector Mounting Base w/Relay — SIGA-RB4 4-inch Detector Mounting Base w/Relay w/ SIGA-TS4 Trim Skirt — SIGA-IB Detector Mounting Base w/Fault Isolator — SIGA-IB4 4-inch Detector Mounting Base w/ Fault Isolator and SIGA-TS4 Trim Skirt — SIGA-LED Remote Alarm LED. (Connects to the SIGA-SB or SIGA-SB4 Standard Base only.) — SIGA-AB4G Audible (Sounder) Base for Fire Detectors — SIGA-AB4GT Audible (Sounder) Base for CO and Fire Detectors — SIGA-TCDR Temporal Pattern Generator — SIGA-CRR Polarity Reversal Relay can be used for sounding to other audible bases on the same 24 Vdc circuit. — SIGA-TS4 Trim Skirt (supplied with 4-inch bases) — SIGA-DMP Detector Mounting Plate — SIGA-RTA Detector Removal Tool — SIGA-VA Detector Cleaning Tool — 2-SPRC2 Replacement Smoke Chamber — 2-CORPL Replacement CO Sensor
-
Product Description NOTE: This part is discontinued by the manufacturer. Replace with SIGA-PD. Edwards EST SIGA2-PS Intelligent Photoelectric Smoke Detectors are only for use with Signature Loop Controller. COMPATIBLE BASES and ACCESSORIES: — SIGA-SB Detector Mounting Base - Standard — SIGA-SB4 4-inch Detector Mounting Base w/ SIGA-TS4 Trim Skirt — SIGA-RB Detector Mounting Base w/Relay — SIGA-RB4 4-inch Detector Mounting Base w/Relay w/ SIGA-TS4 Trim Skirt — SIGA-IB Detector Mounting Base w/Fault Isolator — SIGA-IB4 4-inch Detector Mounting Base w/ Fault Isolator and SIGA-TS4 Trim Skirt — SIGA-LED Remote Alarm LED. (Connects to the SIGA-SB or SIGA-SB4 Standard Base only.) — SIGA-AB4G Audible (Sounder) Base for Fire Detectors — SIGA-AB4GT Audible (Sounder) Base for CO and Fire Detectors — SIGA-TCDR Temporal Pattern Generator — SIGA-CRR Polarity Reversal Relay can be used for sounding to other audible bases on the same 24 Vdc circuit. — SIGA-TS4 Trim Skirt (supplied with 4-inch bases) — SIGA-DMP Detector Mounting Plate — SIGA-RTA Detector Removal Tool — SIGA-VA Detector Cleaning Tool
-
Product Description The Edwards TSD-SJ-C01 is a SuperDuct Four-Wire Duct Smoke Detector with RJ-45 modular connector. Includes carbon monoxide (CO1) sensor.module COMPATIBLE ACCESSORIES: — SD-T8 8-inch sampling tube — SD-T18 18-inch sampling tube — SD-T24 24-inch sampling tube — SD-T36 36-inch sampling tube — SD-T42 42-inch sampling tube — SD-T60 60-inch sampling tube — SD-T78 78-inch sampling tube — SD-T120 120-inch sampling tube — SD-RJ5 RJ-45 wiring harness kit, 5.0 ft — SD-RJ10 RJ-45 wiring harness kit, 10.0 ft — SD-RJ15 RJ-45 wiring harness kit, 15.0 ft — SD-RJ20 RJ-45 wiring harness kit, 20.0 ft. — SD-TRM4 Remote test-reset station, magnetic — SD-TRK4 Remote test-reset station, keyed — SD-MAG Test magnet kit — SD-TMP Sampling tube mounting plate — SD-VTK Air velocity test kit — SD-GSK Cover gasket kit
-
Product Description The EST APS4-B is the Auxiliary Power Supply for the IRC-3 FACP.
-
Key Features
- EN137:2006 Type 2 MED Approved Breathing Apparatus
- Compliance set for Marine and Industrial firefighting environments
- Rigid backframe construction
-
Key Features
- Proven high performance pneumatic system
- Compact first breath activated demand valve with bypass
- Ergonomically designed lightweight backplate and type 2 harness
-
Key Features
- EN137:2006 Type 2 MED Approved Breathing Apparatus
- Compliance set for Industrial Professional Fire Fighting or Oil & Gas markets
- Rigid backframe construction
