-
Product Description The Edwards 6270B is a 24VDC Photoelectric Smoke Detector. COMPATIBLE BASES: — 6249B-001 — 6251B-001A -
Product Description Edwards EST 6501-10 is an Expansion Module for use with Edwards EST's 6500 Series Fire Alarm Control Panels.
-
Product Description Edwards EST 6501-24 Alarm Receiving Module is for use with Edwards EST's 6500 Series Fire Alarm Control Panels. Class B. Contact rating .2 amp resistive at 24VDC only. Note: Similar to 6501-2 but with normally open alarm contacts.
-
Product Description Edwards EST 6501-25 Receiving Module is a Combustion Receiving Module, Class B with alarm and trouble lamp. Features normally open alarm operated contacts. (.2 amp resistive at 2VDC) For use with Edwards EST's 6500 Series Fire Alarm Control Panels.
-
Product Description Edwards EST 6501-25 Receiving Module [NEW] is a Combustion Receiving Module, Class B with alarm and trouble lamp. Features normally open alarm operated contacts. (.2 amp resistive at 2VDC) For use with Edwards EST's 6500 Series Fire Alarm Control Panels.
-
Product Description Edwards 6501-72A Fire Alarm Smoke Detector Receiving Module is for use with Edwards EST's 6500 Series Fire Alarm Control Panels.
-
Product Description Edwards 6513-2 Signal Control Module
-
Product Description The Edwards 6536-G5 is a White Mini Horn Strobe. Lens Color Clear, Voltage 24vac/dc, Sound Level 82db @ 10 Ft., Height 4-1/2 In., Width 4-9/16 In
-
Product Description Edwards 6833-1 Fire Fighters Telephone Wall Plate is a single-gang Portable Telephone Handset Receptacle with Stainless Steel Faceplate. Designed for use with Firefighter's Telephones 6830-3 or 6700-0061.
-
Product Description Edwards EST 757-8A-SS25 Synchronized Speaker-Strobe COMPATIBLE SYNCHRONIZATION SOURCES: — G1M Genesis Signal Master — Snap-on Mount — G1M-RM Genesis Signal Master Remote Mount (1-gang) — SIGA-CC1S Intelligent Synchronization Output Module (2-gang) — SIGA-MCC1S Intelligent Synchronization Output Module (Plug-in UIO) — BPS6A 6.5 Amp Booster Power Supply — BPS10A 10 Amp Booster Power Supply
-
Product Description Edwards 8572-A111 Bell Circuit Module for the Edwards 5703 FACP.
-
Product Description The Edwards 864-E5 is a Fire Horn for surface mounting. 12V 60HZ 1.25AMP
-
Product Description The Edwards 874-G5 Vibrating Horn is designed for surface mounting. Adjustable output: 88 to 113dB @ 1m (78 to 103dB @ 10ft.) Power: 24VAC, 0.63 A Also available: 872-PO AdaptaHorn Plastic projector snaps onto any AdaptaHorn. Sold separately.
-
Product Description Edwards 879EX-E1 Adaptahorn is a heavy-duty, high decibel, vibrating horn signal designed for use in hazardous locations. 12VDC Operating voltage with wide operating voltage range -20% to +10% of nominal voltage. Power connection wires embedded in sealing compound Two mounting brackets are provided on either side of the unit for wall mounting. The housing is tapped on one side for 3/4" conduit to allow for field wiring installation.
-
Product Description Edwards 881ALD-AW Flush Horn
-
Product Description Edwards 8ZEXP 8 Zone Expansion Module The 8 Zone Expansion Module for LSS4 Fire Alarm Control Panel. Class B and open collector circuit per zone.
-
Product Description The Edwards 98BR-G1 is an Adapt-A-Beacon Light Duty Strobe. FEATURES and SPECIFICATIONS: Voltage: 24 VDC Color: Red Lamp Type: Strobe Flash Rate/Minute: 65 Mounting: Conduit;Direct
-
Product Description Edwards EST A60U2 Line Isolator Module
-
Product Description Edwards EST B4U Detector Base is intended for use with these Analog Addressable Detectors from GE's Edwards Signalling and Security Systems: — E-HD Heat Detector — E-PHD Photoelectric/Heat Detector — E-PD Photoelectric Detector — E-PDD Duct Detector
-
Product Description The EST BPS-10A Booster Power Supply (10 amp) is designed to extend the signaling capacity of a fire alarm, security, or access control system. The BPSs can be connected to existing Class A or Class B notification appliance circuits (NACs) or activated via option modules. The BPSs can either pass or generate synchronization signals for Genesis sync strobes. The BPSs have four independent NAC / AUX circuits that are supervised when configured for NAC, plus a trouble relay. The input circuits of the booster power supply can be connected to 12 VDC or 24 VDC systems.
-
-
Product Description The EST BPS-10A Booster Power Supply (10 amp) is designed to extend the signaling capacity of a fire alarm, security, or access control system. The BPSs can be connected to existing Class A or Class B notification appliance circuits (NACs) or activated via option modules. The BPSs can either pass or generate synchronization signals for Genesis sync strobes. The BPSs have four independent NAC / AUX circuits that are supervised when configured for NAC, plus a trouble relay. The input circuits of the booster power supply can be connected to 12 VDC or 24 VDC systems.
-
Product Description This is the Replacement Board for the Edwards EST BPS6A Booster Power Supply (6.5 amp) is designed to extend the signaling capacity of a fire alarm, security, or access control system. The BPSs can be connected to existing Class A or Class B notification appliance circuits (NACs) or activated via option modules. The BPSs can either pass or generate synchronization signals for Genesis sync strobes. The BPSs have four independent NAC/AUX circuits that are supervised when configured for NAC, plus a trouble relay. The input circuits of the booster power supply can be connected to 12 VDC or 24 VDC systems.
-
Product Description The Edwards EST C-DTS is a Detector Test Station, single-gang, flush mount.
