-
Product Description NOTE: This part is discontinued by the manufacturer. There is no designated replacement. The Edwards DLD Dual Line Dialer provides two telephone line connections for transmitting system status changes to one or two compatible digital alarm communicator receivers (DACRs) over the public switched telephone network. For use with QS FACPs. -
Product Description Edwards CS2002-11 Manual Yellow Pull Station
-
Product Description The Edwards EST CRB4U-1 is a 4" relay detector base (1.25A @ 30 Vdc) for use with Edwards EST EC Series of Smoke and Heat Detectors.
-
Product Description The Edwards CF200-EWT is an Explosion-Proof Fixed Temperature Heat Detector. Model CF-200-EWT is rated for 200F (93C) Contacts: Single Pole Normally Open - Rated at: 3.0 amps at 6 to 125VAC; 1.0 amps at 6 to 28VDC; 0.3 amps at 125VDC; 0.1 amp at 250VDC.
-
Product Description The Edwards EST C-DTS is a Detector Test Station, single-gang, flush mount.
-
Product Description This is the Replacement Board for the Edwards EST BPS6A Booster Power Supply (6.5 amp) is designed to extend the signaling capacity of a fire alarm, security, or access control system. The BPSs can be connected to existing Class A or Class B notification appliance circuits (NACs) or activated via option modules. The BPSs can either pass or generate synchronization signals for Genesis sync strobes. The BPSs have four independent NAC/AUX circuits that are supervised when configured for NAC, plus a trouble relay. The input circuits of the booster power supply can be connected to 12 VDC or 24 VDC systems.
-
Product Description The EST BPS-10A Booster Power Supply (10 amp) is designed to extend the signaling capacity of a fire alarm, security, or access control system. The BPSs can be connected to existing Class A or Class B notification appliance circuits (NACs) or activated via option modules. The BPSs can either pass or generate synchronization signals for Genesis sync strobes. The BPSs have four independent NAC / AUX circuits that are supervised when configured for NAC, plus a trouble relay. The input circuits of the booster power supply can be connected to 12 VDC or 24 VDC systems.
-
-
Product Description The EST BPS-10A Booster Power Supply (10 amp) is designed to extend the signaling capacity of a fire alarm, security, or access control system. The BPSs can be connected to existing Class A or Class B notification appliance circuits (NACs) or activated via option modules. The BPSs can either pass or generate synchronization signals for Genesis sync strobes. The BPSs have four independent NAC / AUX circuits that are supervised when configured for NAC, plus a trouble relay. The input circuits of the booster power supply can be connected to 12 VDC or 24 VDC systems.
-
Product Description Edwards EST B4U Detector Base is intended for use with these Analog Addressable Detectors from GE's Edwards Signalling and Security Systems: — E-HD Heat Detector — E-PHD Photoelectric/Heat Detector — E-PD Photoelectric Detector — E-PDD Duct Detector
-
Product Description Edwards EST A60U2 Line Isolator Module
-
Product Description The Edwards 98BR-G1 is an Adapt-A-Beacon Light Duty Strobe. FEATURES and SPECIFICATIONS: Voltage: 24 VDC Color: Red Lamp Type: Strobe Flash Rate/Minute: 65 Mounting: Conduit;Direct
-
Product Description Edwards 8ZEXP 8 Zone Expansion Module The 8 Zone Expansion Module for LSS4 Fire Alarm Control Panel. Class B and open collector circuit per zone.
-
Product Description Edwards 881ALD-AW Flush Horn
-
Product Description Edwards 879EX-E1 Adaptahorn is a heavy-duty, high decibel, vibrating horn signal designed for use in hazardous locations. 12VDC Operating voltage with wide operating voltage range -20% to +10% of nominal voltage. Power connection wires embedded in sealing compound Two mounting brackets are provided on either side of the unit for wall mounting. The housing is tapped on one side for 3/4" conduit to allow for field wiring installation.
-
Product Description The Edwards 874-G5 Vibrating Horn is designed for surface mounting. Adjustable output: 88 to 113dB @ 1m (78 to 103dB @ 10ft.) Power: 24VAC, 0.63 A Also available: 872-PO AdaptaHorn Plastic projector snaps onto any AdaptaHorn. Sold separately.
-
Product Description The Edwards 864-E5 is a Fire Horn for surface mounting. 12V 60HZ 1.25AMP
-
Product Description Edwards 8572-A111 Bell Circuit Module for the Edwards 5703 FACP.
-
Product Description Edwards EST 757-8A-SS25 Synchronized Speaker-Strobe COMPATIBLE SYNCHRONIZATION SOURCES: — G1M Genesis Signal Master — Snap-on Mount — G1M-RM Genesis Signal Master Remote Mount (1-gang) — SIGA-CC1S Intelligent Synchronization Output Module (2-gang) — SIGA-MCC1S Intelligent Synchronization Output Module (Plug-in UIO) — BPS6A 6.5 Amp Booster Power Supply — BPS10A 10 Amp Booster Power Supply
-
Product Description Edwards 6833-1 Fire Fighters Telephone Wall Plate is a single-gang Portable Telephone Handset Receptacle with Stainless Steel Faceplate. Designed for use with Firefighter's Telephones 6830-3 or 6700-0061.
-
Product Description The Edwards 6536-G5 is a White Mini Horn Strobe. Lens Color Clear, Voltage 24vac/dc, Sound Level 82db @ 10 Ft., Height 4-1/2 In., Width 4-9/16 In
-
Product Description Edwards 6513-2 Signal Control Module
-
Product Description Edwards 6501-72A Fire Alarm Smoke Detector Receiving Module is for use with Edwards EST's 6500 Series Fire Alarm Control Panels.
-
Product Description Edwards EST 6501-25 Receiving Module [NEW] is a Combustion Receiving Module, Class B with alarm and trouble lamp. Features normally open alarm operated contacts. (.2 amp resistive at 2VDC) For use with Edwards EST's 6500 Series Fire Alarm Control Panels.
