-
Product Description The Edwards EST SIGA-DH Duct Detector Housing is specially designed exploit all the capabilities of Signature Series intelligent photoelectric and multisensor smoke detectors. Five one-gang knockouts on the 16 gauge steel housing provide a location for mounting intelligent Signature Series modules. The Edwards EST SIGA-DH Duct Housing comes with a 6 inch (150 mm) exhaust tube. Air sampling tubes are available in lengths from 8 inches (200 mm) to 10 feet (3048 mm) and must be ordered separately. -
Product Description The Edwards EST SIGA-CT2 Dual Input Module is an intelligent analog addressable device used to connect one or two Class B normally-open Alarm, Supervisory, or Monitor type dry contact Initiating Device Circuits (IDC). For use exclusively with Edwards / EST’s Signature Loop Controller.
-
Product Description Edwards EST SIGA-CT1 Single Input Module is an intelligent analog addressable device used to connect a Class B normally-open Alarm, Supervisory, or Monitor type dry contact Initiating Device Circuit (IDC); uses one module address Designed for use with Signature Loop Controller only. Mounts to standard single gang electrical boxes.
-
Product Description Edwards EST SIGA-CRR Polarity Reversal Relay Module is an addressable device that is used to power and activate the audible sounder in Signature audible detector bases. The module can support a 2A load of bases. Upon command from the loop controller, the SIGA-CRR module relay transfers, reversing the polarity of its 24VDC output.
-
Product Description The Control Relay Module Model EST SIGA-CR, is a component of the Signature Series System. The SIGA-CR is an addressable device used to provide one Form "C" dry relay contact to control external appliances (door closers, fans, dampers, etc.) or equipment shutdown. The Edwards EST SIGA-CR requires the Signature Loop Controller. Can be mounted in a North American 2-1/2" (64 mm) deep 1-gang box, or standard 4" square 1-1/2" (38 mm) deep box with 1-gang cover.
-
Product Description Edwards EST SIGA-CC2 Dual Input Signal Module
-
Product Description Edwards EST SIGA-CC1S Sync Module
-
Product Description Edwards EST SIGA-CC1 Single Input Signal Modules are intelligent addressable devices used for connecting a supervised Class B signal or audio speaker to their respective power inputs on command from the loop controller. In addition, the SIGA-CC1 can connect telephone circuits to power inputs on command from the loop controller. See also SIGA-MCC1 for equivalent product.
-
Product Description The Edwards EST SIGA-APS Intelligent Auxiliary Power Supply is a switch mode supply that provides additional power for any Fire Alarm Control Panel that contains a Signature Data Circuit. May be mounted remotely to supply power to remote signaling devices, amplifiers or system equipment. Takes two input module addresses, provides power supply status to control panel 6.4 Amp output provided through two 3.2 Amp output taps Charges up to 10 Amp-Hour Batteries
-
Product Description The Signature Series model SIGA-AB4GT CO Compatible Sounder Base is a sounder base specifically designed for use with CO sensors. It is not compatible with a coded system. The base uses the same address and programming label as the detector it supports. It requires a SIGA-TCDR Temporal Pattern Generator to add the audible output function to any Signature Series detector
-
Product Description The Edwards EST SIGA-AB4G Audible (Sounder) Detector Base is designed for use with Signature Series detectors and GE's Signature Loop Controller. The sounder base uses two reversible jumpers to select any one of four outputs: 1—High dBA; Temporal Tone output (default). 2—High dBA; Steady Tone output. 3—Low dBA; Temporal Tone output. 4—Low dBA; Steady Tone output. For use with Edwards / EST Signature Series detectors: — SIGA-IS Ionization Smoke Detector — SIGA-PS Photoelectric Smoke Detector — SIGA-PHS Combination Photoelectric Smoke and Fixed-Temperature Heat Detector — SIGA-IPHS Combination Ionization, Photoelectric, and Thermal Boost Type Smoke Detector — SIGA-HFS Fixed-Temperature Heat Detector — SIGA-HRS Combination Rate-of-Rise, and Fixed-Temperature Heat Detector
-
Product Description Edwards EST SIGA-AA50 Intelligent Audio Amplifier Board
-
Product Description Edwards EST SIGA-AA30 Intelligent Audio Amplifier – 30 Watt. Two riser inputs, 1/25 Vrms. Output selectable 25/70 Vrms. Communicates with panel via Signature or GSA Data Circuit. . COMPATIBLE power sources — System power, MIRMIRBPS6A/10A, APS6A/10A; SIGA-APS (for retrofit only) COMPATIBLE enclosures — 2-WB3(R), 2-WB7(R), RACCR, APS6A, APS10A
-
Product Description Edwards EST SIGA-278 Fire Alarm Pull Station is an addressable contemporary style manual station made from durable red colored lexan. Signature Series manual stations are compatible only with EST’s Signature Loop Controller. The loop controller electronically addresses each manual station. Mounts to 2½ inch (64 mm) deep single-gang boxes.
-
Product Description The Edwards EST SIGA-270P is a Single Action Two Stage (Presignal) Manual Pull Station compatible for use only with the Signature Loop Controller. Microprocessor stores programmable address, serial number, type of device, job number, hours of operation, last maintenance date, number of alarms and troubles, and time and date of last alarm. One device address is required. The loop controller assigns an address to the station automatically. A custom address can be assigned to the station via laptop computer; no addressing switches are used.
-
Product Description The Edwards EST SIGA-270 is a one stage intelligent Manual Pull Station compatible for use only with the Signature Loop Controller. One pull on the station handle breaks the glass rod and triggers an alarm. Microprocessor stores programmable address, serial number, type of device, job number, hours of operation, last maintenance date, number of alarms and troubles, and time and date of last alarm. One device address is required. The loop controller assigns an address to the station automatically. A custom address can be assigned to the station via laptop computer; no addressing switches are used.
-
Product Description Edwards Signaling TRM4 SuperDuct Series Remote Test Station is intended for use with 4-wire detectors.
-
Product Description Edwards SD-TRM Remote Test Station
-
Product Description The Edwards EST SD-TRK4 Remote Test Station is designed for use with the Edwards EST SIGA-SD Intelligent Duct Smoke Detector.
-
Product Description Edwards SD-TRK is a keyed Remote Test Station designed for use with Edward's SuperDuct 2-wire duct smoke detectors. Mounts to single-gang electrical box.
-
Product Description The Edwards EST SD-T78 is a 78-inch Sampling Tube designed for use with SIGA-SD.
-
-
Product Description The Edwards EST SD-T42 is a 42-inch Sampling Tube designed for use with SIGA-SD.
-
Product Description The Edwards EST SD-T36 is a 36-inch Sampling Tube designed for use with SIGA-SD.
-
Product Description The Edwards EST SD-T24 24-inch Sampling Tube is designed for use with SIGA-SD.
-
Product Description The Edwards EST SD-T18 is an 18" Sampling Tube for use with the SuperDuct SD Series Duct Detectors.
-
Product Description Edwards SD-2W Photoelectric Duct Smoke Detector 2-Wire Conventional
-
Product Description Edwards SA-DACT Small Analog Series Dual Line Dialer
-
Product Description Edwards SA-232 RS-232 Interface Card provides an RS-232 interface to the panel. The card can be used for connecting a printer to the control panel to print system events. The card can also be used for uploading and downloading panel configuration, history, and current status to a PC running the configuration utility.
-
Product Description Edwards RS-232 Interface for ESA 2000
-
Product Description Edwards RLCD-R is a LCD text annunciator without common controls. The RLCD-R annunciator communicates with the FACP on the RS-485 data riser. Can be configured for Class A or Class B communication. Requires 24 VDC, continuous. Operate as a stand-alone unit that can be powered by the FACP or by an approved power supply. Mounts on a standard 4 in. square electrical box, using the included mounting ring. Can also be surface mounted in locking steel enclosures.
-
-
Product Description Edwards EST RAI Remote Annunciator Interface
-
Product Description The Edwards EST QS-FUSE is a Replacement Fuse for Primary power input. For use with QuickStart FACPs.
-
Product Description Edwards EST QS-232 UART Module is a UART expansion card for use with QuickStart FACPs.
-
Product Description The Edwards P-039250 Steel Back Box is designed for surface mounting Edwards 270 Series Manual Pull Stations.
