-
Key Features:; Multiple indicators - supply present, general fault, fault type & aux. equipment fault. Two selectable battery charge currents. Battery fault impedance limits can be optimised to suit load current (helps extend battery life). Mains fail simulation mode. Improved on-board temperature sensor with optional remote sensor. Electronic functions comply with EN50131-6 grades 1-4 for security applications. BF562-1/E caged & BF562-1/C PCB-only versions available. -
-
Key Features:; BSI certified to EN54-13 (Fire detection and fire alarm systems, compatibility assessment of system components). Detects resistances down to 10 ohms. One required per BF354 interface board sounder circuit Measures 50mm x 26mm x 5mm with 100mm tail (can be be fitted inside or alongside the last device on the sounder circuit).
-
Key Features; A bespoke alternative to standard metal conduit boxes. Simplifies the installation of C-TEC manufactured fire detector bases and base sounder/VADs on ceiling tiles, solid ceilings, wooden beams, etc. Can be mounted directly onto a surface or in recesses behind ceiling tiles and plasterboard. Multiple access wiring points and lots of working space. Features two anti-rotation spikes. Easy termination of 16mm or 20mm cable glands ivia side and rear drill-out cable entry points.
-
-
-
Key Features:; Adapts to most European fixing centres Multiple variants available - options include single gang shallow (NCP23), single gang deep (NCP24), double gang shallow (NCP25) and double gang deep (NCP26). Designed to match C-TEC's existing plastics and colours. Tough and durable. Can also be surface mounted directly to a wall.
-
Key Features:; Adapts to most European fixing centres. Multiple variants available - options include single gang shallow (NCP23), single gang deep (NCP24), double gang shallow (NCP25) and double gang deep (NCP26). Designed to match C-TEC's existing plastics and colours. Tough and durable. Can also be surface mounted directly to a wall.
-
Key Features:; Adapts to most European fixing centres. Multiple variants available - options include single gang shallow (NCP-23), single gang deep (NCP-24), double gang shallow (NCP-25) and double gang deep (NCP-26). Designed to match C-TEC's existing plastics and colours. Tough and durable. Can also be surface mounted directly to a wall.
-
Key Features:; Adapts to most European fixing centres. Multiple variants available - options include single gang shallow (NCP-23), single gang deep (NCP-24), double gang shallow (NCP-25) and double gang deep (NCP-26). Designed to match C-TEC's existing plastics and colours. Tough and durable. Can also be surface mounted directly to a wall.
-
-
-
Key Features:; Provides authorised users with access to a fire panel's authorised user controls Finished in red polycarbonate for extra strength Suitable for use with the C-Tec’s CFP 2-8 zone standard, economy and AlarmSense fire panels, C-Tec’s XFP 1 Loop 16 Zone panel and C-Tec’s full range of ZFP multi-loop addressable fire panels Dimensions – 47w x 25h x 9d (mm) Red polycarbonate
-
-
-
-
-
-
-
-
-
-
-
-
Key Features:; Third-party certified to the relevant parts of EN54 in conjunction with our ActiV detectors Easy to fit with lots of working space Can be ceiling mounted in any orientation due to the true 360° degree viewing angle of the LED indicator strips on all ActiV detectors Integrated detector/base locking mechanism, head removal tool and ID tag Simple ‘click and twist’ design Remote LED terminals for the optional connection to a BF318 Remote indicator Bright tin plated steel terminals can accept fire rated cable of up to 2.5mm in diameter C4408D diode and C4408 non-diode bases available* Compatible with C-TEC’s entire range of ActiV conventional smoke and heat detectors
-
-
-
-
-
Activation current – Typically 30mA @ 24VDC Indicators – Red relay activated LED Connections – +V; -V (Supply); NC; C; NO (SW1 & SW2). Contact rating @ 24Vdc is 5A (resistive) 2A (inductive); Contact rating@ 240Vac is 5A (resistive) 2A (inductive) Product dimensions (mm) – 85w x 85h x 27d (mm) can be mounted onto a standard UK 25mm single gang flush or surface back box Construction & finish – White PVC plate; light grey label; silver nickel contacts IP Rating – IP40 Weight – 78g Operating temperature – -10C to +60C
-
-
-
C-Tec BF360-12 Boxed EN54 12v 2a Power Supply Unit (VDS Certified); Max. physical battery size (with STU plate): 1 x 12V 3 Ah Max. physical battery size (no STU plate): 1 x 12V 7 Ah Standard battery charging capacity: 2 Ah to 12 Ah Output option A: 1.8A DC current, 0.2A charge current Output option B: 1.3A DC current, 0.7A charge current Enclosure size (WxHxD): 380 x 235 x 96mm Physical attributes: Plastic lid and base
-
C-Tec BF360-24 Boxed EN54 24v 1.5a Power Supply Unit (VDS Certified); Low current consumption. Deep discharge battery protection and EN54 compliant flagging of battery impedance faults. Single-pole volt-free changeover relay that switches for any fault condition. Three LED indicators - supply present, general fault and auxiliary fault (for optional connection to third-party equipment). Link selectable battery charging capacity. Optional high-temperature output activates when internal box temperature reaches 55°C, for connection to ventilation fans.
-
C-Tec 24v 1.5A EN54-4/A2 Boxed Power Supply Unit (VDS Certified); BF362-1; Low current consumption Deep discharge battery protection and EN54 compliant reporting of battery impedance faults Single-pole volt-free changeover relay that switches for any fault condition Three LED indicators - supply present, general fault and auxiliary fault (for optional connection to third-party equipment) Link selectable battery charging capacity Environmentally-friendly charging circuit - dissipates just 0.35W compared to the industry norm of around 2.55W. Optional high-temperature output activates when internal box temperature reaches 55oC, for connection to ventilation fans, etc. Optional handheld status reader (shows internal temperature, charging voltage and current of connected PSU). Serial data link also provided for third-party OEM equipment All boxed versions third-party certified to EN54-4 (1997/A2:2006) by the VdS or LPCB
-
C-Tec 24v 3A EN54-4/A2 Boxed Power Supply Unit (LPCB Certified) BF362-3; Low current consumption Deep discharge battery protection and EN54 compliant reporting of battery impedance faults Single-pole volt-free changeover relay that switches for any fault condition Three LED indicators - supply present, general fault and auxiliary fault (for optional connection to third-party equipment) Link selectable battery charging capacity Environmentally-friendly charging circuit - dissipates just 0.35W compared to the industry norm of around 2.55W. Optional high-temperature output activates when internal box temperature reaches 55oC, for connection to ventilation fans, etc. Optional handheld status reader (shows internal temperature, charging voltage and current of connected PSU). Serial data link also provided for third-party OEM equipment All boxed versions third-party certified to EN54-4 (1997/A2:2006) by the VdS or LPCB
