-
Product Description NOTE: This part is discontinued by the manufacturer. Replace with: SIGA-OSHCD. Edwards EST SIGA-PHCD Intelligent Multisensor is compatible only with the Signature Loop Controller. COMPATIBLE BASES and ACCESORIES: — SIGA-SB Detector Mounting Base - Standard — SIGA-SB4 4-inch Detector Mounting Base c/w Trim Skirt — SIGA-RB Detector Mounting Base w/Relay — SIGA-RB4 4-inch Detector Mounting Base w/Relay, c/w Trim Skirt — SIGA-IB Detector Mounting Base w/Fault Isolator — SIGA-IB4 4-inch Detector Mounting Base w/ Fault Isolator, c/w Trim Skirt — SIGA-LED Remote Alarm LED (not for EN54 applications) — SIGA-AB4G-LF Low Frequency Audible (Sounder) Base for CO and Fire Detectors 0.3 (0.15) — SIGA-AB4GT Audible (Sounder) Base for CO and Fire Detectors 0.3 (0.15) — SIGA-TS4 Trim Skirt (supplied with 4-inch bases) 0.1 (.04) — SIGA-TSB Trim Skirt for 4” Base, Black 0.1 (.04) — SIGA-DMP Detector Mounting Plate -
Product Description The Edwards EST SIGA-PHD provides an optical smoke sensor and a rate-of-rise heat sensor with a fixed temperature setting. The SIGA-PHD detector is compatible only for use with the Signature Loop Controller. COMPATIBLE BASES and ACCESSORIES: — SIGA-SB Detector Mounting Base - Standard — SIGA-SB4 4-inch Detector Mounting Base w/ SIGA-TS4 Trim Skirt — SIGA-RB Detector Mounting Base w/Relay — SIGA-RB4 4-inch Detector Mounting Base w/Relay w/ SIGA-TS4 Trim Skirt — SIGA-IB Detector Mounting Base w/Fault Isolator — SIGA-IB4 4-inch Detector Mounting Base w/ Fault Isolator and SIGA-TS4 Trim Skirt — SIGA-LED Remote Alarm LED. (Connects to the SIGA-SB or SIGA-SB4 Standard Base only.) — SIGA-AB4 Audible (Sounder) Base — SIGA-CRR Polarity Reversal Relay can be used for sounding to other audible bases on the same 24 Vdc circuit. — SIGA-TS4 Trim Skirt (supplied with 4-inch bases) — SIGA-DMP Detector Mounting Plate — SIGA-RTA Detector Removal Tool — SIGA-VA Detector Cleaning Tool
-
Product Description Edwards EST SIGA-RB Detector Base (with Relay) is part of the Signature Series of Intelligent Addressable Initiating Devices. For use with Edwards / EST Signature Series detectors: —SIGA-IS Ionization Smoke Detector —SIGA-PS Photoelectric Smoke Detector —SIGA-PHS Combination Photoelectric Smoke and Fixed-Temperature Heat Detector —SIGA-IPHS Combination Ionization, Photoelectric, and Thermal Boost Type Smoke Detector —SIGA-HFS Fixed-Temperature Heat Detector —SIGA-HRS Combination Rate-of-Rise, and Fixed-Temperature Heat Detector
-
Product Description Edwards EST SIGA-RB4 Relay Base is a plug-in Detector Base with a Form 'C' Relay. Includes TS4 trim skirt. For use with Signature Loop Controller. Mounts to 4 inch standard electrical box.
-
Product Description The SIGA-REL Releasing Module is a network component that provides control for fire suppression routines. It fulfils much the same purpose as a standalone releasing panel, but supports Signature Series detectors as an integral part of the suppression system.
-
Product Description EST SIGA-RM1 Riser Monitor Module
-
Product Description Edwards EST SIGA-SB Standard Plug-in Detector Base is designed for use with Edwards / EST Signature Series detectors and GE's Signature Loop Controller. See also: SIGA-SB4 Standard Detector Base, 4-inch For use with these Edwards / EST Signature Series detectors: — SIGA-IS Ionization Smoke Detector — SIGA-PS Photoelectric Smoke Detector — SIGA-PHS Combination Photoelectric Smoke and Fixed-Temperature Heat Detector — SIGA-IPHS Combination Ionization, Photoelectric, and Thermal Boost Type Smoke Detector — SIGA-HFS Fixed-Temperature Heat Detector — SIGA-HRS Combination Rate-of-Rise, and Fixed-Temperature Heat Detector
-
Product Description The Edwards EST SIGA-SB4 is a Standard 4-inch Detector Mounting Base with SIGA-TS Trim Skirt. For use with these Edwards / EST Signature Series detectors: — SIGA-IS Ionization Smoke Detector — SIGA-PS Photoelectric Smoke Detector — SIGA-PHS Combination Photoelectric Smoke and Fixed-Temperature Heat Detector — SIGA-IPHS Combination Ionization, Photoelectric, and Thermal Boost Type Smoke Detector — SIGA-HFS Fixed-Temperature Heat Detector — SIGA-HRS Combination Rate-of-Rise, and Fixed-Temperature Heat Detector
-
Product Description The Edwards EST SIGA-SD Photoelectric Duct Smoke Sensor is part of the electronic addressable Signature Series of fire alarm controls and accessories from GE / EST Fire Life and Safety. Compatible only for use with Edwards EST Signature Loop Controller. Provides one Form C auxiliary alarm relay for controlling ancillary equipment (e.g., HVAC controls). -20 to 158 °F (-29 to 70 °C) operating range with 100 ft/min. to 4,000 ft/min air velocity rating 15.2 to 19.95 VDC operation COMPATIBLE BASES and ACCESSORIES: — SIGA-SB Detector Mounting Base - Standard — SIGA-SB4 4-inch Detector Mounting Base w/ SIGA-TS4 Trim Skirt — SIGA-RB Detector Mounting Base w/Relay — SIGA-RB4 4-inch Detector Mounting Base w/Relay w/ SIGA-TS4 Trim Skirt — SIGA-IB Detector Mounting Base w/Fault Isolator — SIGA-IB4 4-inch Detector Mounting Base w/ Fault Isolator and SIGA-TS4 Trim Skirt — SIGA-LED Remote Alarm LED. (Connects to the SIGA-SB or SIGA-SB4 Standard Base only.) — SIGA-AB4G Audible (Sounder) Base for Fire Detectors — SIGA-AB4GT Audible (Sounder) Base for CO and Fire Detectors — SIGA-TCDR Temporal Pattern Generator — SIGA-CRR Polarity Reversal Relay can be used for sounding to other audible bases on the same 24 Vdc circuit. — SIGA-TS4 Trim Skirt (supplied with 4-inch bases) — SIGA-DMP Detector Mounting Plate — SIGA-RTA Detector Removal Tool — SIGA-VA Detector Cleaning Tool
-
Product Description The Edwards EST SIGA-SDPCB is a Replacement Board / Signature Sensor Kit for use with SIGA-SD Intelligent Duct Smoke Detectors. Includes rubber seals.
-
Product Description The Edwards / EST SIGA-SEC2 is an intelligent analog addressable device used to connect one or two normally-open or normally-closed dry contact security circuits. Compatible for use with the EST3 Signature loop controllers, and requires two Signature addresses.
-
Product Description Edwards EST SIGA-ST Detector Cleaning Tool is used to clean SIGA detectors using a conventional vacuum cleaner. The tool connects to a 1.5- inch (3.8 cm) suction hose/extension tube. The tool removes loose dust and debris by creating a high velocity vortex scrubbing action around the detector.
