12, zonal, fire & fault indications
3 year warranty as standard
Simple, colour coded buttons for controls
Integral 1 amp switch mode PSU
Class change & alert inputs
Programmable outputs
Test mode & disablement functions
Fully functional or passive
Space for up to 3.2Ah batteries
Key-switch or code entry for activation of controls
Haes 2-12 Zone Fully Functional or Passive Repeater Panel XLEN-R-12
The Excel-EN repeater panels have the same, easy to use, controls and indications as the main control panel, but mounted in a smaller cabinet. The repeaters are fully functional with ‘Silence’, ‘Resound’ and ‘Reset’ controls, as well as Disable and Test Mode functions. It is also possible to disable the controls for each or all repeater panels to make them passive (indication only). Excel-EN panels can support up to 8 repeater panels.
Repeater panels are designed to be wired in a fault tolerant (fail safe) loop configuration, from comms A to B and back to the main panel again. This enables repeater panels to still work if there is a break in the cables. If replacing an older system where the existing cabling cannot be configured in a loop as above, it is possible to re-programme the panel back to legacy, radial circuit, comms monitoring. This then allows any topology of comms cabling to be utilised.
The main circuit board has 2, switch –ve, inputs which can be used to sound or pulse the alarms. These inputs can also be re-programmed for use as PSU fault inputs. The internal comms PCB has 6, switch –ve, programmable outputs.
Key Features:
12, zonal, fire & fault indications
3 year warranty as standard
Simple, colour coded buttons for controls
Integral 1 amp switch mode PSU
Class change & alert inputs
Programmable outputs
Test mode & disablement functions
Fully functional or passive
Space for up to 3.2Ah batteries
Key-switch or code entry for activation of controls
