Kentec Sigma CP-R Repeater Panel with 230v PSU & Standard Enclosure (2 – 8 Zone)

Description

Kentec Sigma CP-R Repeater Panel with 230v PSU & Standard Enclosure (2 – 8 Zone)

The Sigma CP-R Repeater is compatible with all Sigma CP control panels which have operating software version V2.0 or above. Repeaters are available with 2, 4 or 8 zones and in mains powered (K versions) or 24V powered (E versions). Mains powered repeaters require only a two core data cable from the main control panel. 24V DC versions require an additional two cores for power either from the main panel or from another 24V DC source.

A mixture of Repeaters, Ancillary boards or Sounder Boards up to a maximum of 7 of each type can be connected to a control panel and each is allocated an address from 1 to 7 using a binary coded DIL switch. The total length of the data cable from the main panel to the last repeater must not exceed 1200 metres.

Key Features:

Sigma CP-R Two wire serial connection

Up to 7 panels per system

230V AC or 24V DC powered versions

Full control over main panel

Volt free fire and fault contact outputs

Ancillary PCB Two wire serial connection

Up to 7 boards per system

230V AC or 24V DC powered versions

Open collector zonal fault outputs

Volt free fire, coincidence and common fault contact outputs

Variants Available:

Part Number:

Description:

K01020M2

Sigma CP-R Conventional Repeater Panel, with PSU 230V standard enclosure, 2 Zones: Surface

K01040M2

Sigma CP-R Conventional Repeater Panel, with PSU 230V standard enclosure, 4 Zones: Surface

K01080M2

Sigma CP-R Conventional Repeater Panel, with PSU 230V standard enclosure, 8 Zones: Surface