Fully compliant with EN54, Part 11
Re-settable operating element option
Weather proof IP67
Semi-flush or surface mounting
470 Ohm resistor and Normally Open contact complete with glass
Resistive and clean contact connections
Fully compliant with EN54, Part 11
Re-settable operating element option
Weather proof IP67
Semi-flush or surface mounting
470 Ohm resistor and Normally Open contact complete with glass
Resistive and clean contact connections
Weatherproof Manual Call Point 470 Ohms resistor Glass – XENS-829
The new conventional manual call points are designed to provide a manual alarm interface to conventional fire alarm control panels. All call points are supplied in the standard red colour and are available in semi-flush mounting or surface mounting options. The manual call points from Gent are all with a 470 Ohm resistor and Normally Open contact complete with glass.
Both break glass, and resettable operating elements can be used in the standard unit by a yellow strip on the element which becomes visible when activated. With the addition of a hinged transparent cover the element may be protected against accidental operation. A specialist test key may be inserted into the bottom of the unit to lower the glass and release the micro-switch and thus a full functional test is achieved.
Key Features:
Fully compliant with EN54, Part 11
Re-settable operating element option
Weather proof IP67
Semi-flush or surface mounting
470 Ohm resistor and Normally Open contact complete with glass
Resistive and clean contact connections