Installer friendly; EN54/CPD approved
Building Shift Compensation
2-wire Interface from Detector to System controller
Laser Assisted Alignment
Automatic Contamination Compensation
Auto Alignment
Support up to 2 detector heads
Separate Fire and Fault Relays per Detector
Ziton Auto aligning reflective beam detector (FD805R-N) and (FD810R-N)
The FD805R-N consist of an infrared transmitter and receiver in one compact housing, and a ground level controller, which also doubles as a user interface for configuration and maintenance. The infrared signal from the detector is reflected by a prism and analysed for smoke presence. It is particularly designed to be used where point smoke detectors are not applicable due to height or inaccessibility. The FD805R-N also features a motorized head, which allow for auto realignment in cases where gradual building shift occurs. The unit has relay outputs for alarm and fault and fits as such all types of fire panels
Installer friendly
Getting the system operational is simplified by a number of ground-breaking features that combine to make the FD805R-N the quickest and easiest detector of its type to install. Once the detector head is connected, using the Easifit First Fix system, an integral LASER, which is aligned along the optical path of the beam, can be activated. This allows the reflective prism to be sighted quickly and with confidence. Once the LASER has been used to coarsely align the beam, the AutOptimise beam alignment system takes over and automatically steers the beam into the optimum position.
Flexibility
The system can be fully customised, according to the requirements of each installation. Both alarm thresholds (sensitivity) and time to Alarm/Fault can be set from the ground level System Controller. Additionally, the integrated accessory mount allows the use of a variety of standard fittings solve any specific installation issues.
Key Features
EN54/CPD approved
Building Shift Compensation
2-wire Interface from Detector to System controller
Laser Assisted Alignment
Automatic Contamination Compensation
Auto Alignment
Support up to 2 detector heads
Separate Fire and Fault Relays per Detector
Product Codes
Description
FD805R-N
Auto aligning reflective beam detector – 50m
Optical beam smoke detector consists of a detector head (transmitter and reciever in the same housing) a reflector plate and a low level controller.
The controller is capable of supporting two detector heads additonal heads are available FD805RH-N
Laser assisted auto alignment, automatic contamination compensation
Range 8-50m, Lateral detection 7.5m
Detector head dimensions (mm): 135w x 135h x 135d
Controller dimensions (mm): 200w x 235h x 81d
FD810R-N
Auto aligning reflective beam detector – 50m
Optical beam smoke detector consists of a detector head (transmitter and reciever in the same housing) a reflector plate and a low level controller.
The controller is capable of supporting two detector heads additonal heads are available FD805RH-N
Laser assisted auto alignment, automatic contamination compensation
Range 8-50m, Lateral detection 7.5m
Detector head dimensions (mm): 135w x 135h x 135d
Controller dimensions (mm): 200w x 235h x 81d
