Ziton Conventional Beam Detector Accessories

Description

Ziton Conventional Beam Detector Accessories

The FD-MB20 is used to mount a beam detector and/or reflective prism/s at an off perpendicular axis. It allows for easy adjustment to ensure that the required angle between 0° and 45° can be achieved. It can be mounted vertically or horizontally.

Key Features

Easy adjustable

0° to 45° range

Product Code

Description

FD-MB20

Beam detector mounting bracket – FD800 series

Compatible with FD800 series beam detectors and FD-MB30 & FD-MB40 accessories

Optional mounting bracket used to mount the FD800 series beam detectors and reflective adaptors at an off perpendicular axis. Adjustment angle of 0 to 45 degrees. If using with Relectors then the FD-MB30 or FD-MB40 adaptor will be required depending on the number of reflectors being mounted.

FD-MB30

Single Reflector Adaptor

for use with FD-MB20, must be used when mounting a single reflector with the FD-MB20 mounting bracket

FD-MB40

Four Reflector Adaptor

for use with FD-MB20, must be used when mounting 4 reflectors with the FD-MB20 mounting bracket

FD-CH4

Anti-condensation heater for reflectors

An ultra slim heating pad for use with FD-MB30 and FDMB40 reflectors, the heating pad reduces the risk of condensation forming on the reflector surface. One pad will support one or four reflector configurations.

For use in temperature controlled storage areas and cold environments.

FD-MB50

Beam detector mounting bracket – FD310 series

Optional mounting bracket used to mount the FD310beam detector heads at an off perpendicular axis. Adjustment angle of 0 to 180 degrees.

OR2000

Beam detector optical reflector

Reflective plate for use with FD800 series reflective beam detectors. Can be surface mounted or where adjustment of the mouting angle is required can be mounted using the FD-MB20 and either the FD-MB30 or FD-MB40