Triple IR detector
High specification units for critical applications
IP66 Housing
Flame proof housing
Low current consumption
2 Wire, 4 – 20 mA and relay operation
Latching and non latching operation
High / Low sensitivity setting
Tolerance to detector window contamination
Remote self test facility
Microprocessor controlled
Immunity to false sources (arc welding, lightning and static)
EN54-10 & CPD approved; IR Flame Detector – Data Sheet
Ziton FF766 IR Flame Detector In Eexd Flame Proof Housing
The FF766 is a IR³ flame detector in a flame proof housing. IR³ models have execellent response to flame while providing superb immunity to extraneous sources. New micro-processor technology makes the detectors independent of flame intensity enabling it to operate through smoke, a layer of oil, dust, or water vapor. A high and low sensitivity setting according to EN54-10 is provided.
The units can be wired as conventional 2 wire, 4-20 mA, or relay contacts(fire, fault and pre alarm) in latching or non-latching operation. Remote test inputs are available to activate self-test. A stainless steel adjustable bracket and weather shield is also available. The units are tolerant to vibration, and wind does not affect the performance. The IR³ unit has excellent tolerance to detector window contamination and can detect flame through glass windows. A flame sensor test unit is available for accurate testing of the detectors.
Most IR flame sensors respond to 4.3 m light, emitted by hydrocarbon flames. By responding to 0.75 to 2.7 m light emitted by every fire, all flickering flames can be detected. Gas fires not visible to the naked eye e.g. hydrogen may also be detected. The IR³ detectors, responding to adjacent IR wavelengths, enable it to discriminate between flames and spurious sources of IR radiation. The combination of filters and signal processing allows the sensor to be used without risk of false alarms in difficult situations characterised by factors such as flickering sunlight.
Features
Triple IR detector
High specification units for critical applications
IP66 Housing
Flame proof housing
Low current consumption
2 Wire, 4 – 20 mA and relay operation
Latching and non latching operation
High / Low sensitivity setting
Tolerance to detector window contamination
Remote self test facility
Microprocessor controlled
Immunity to false sources (arc welding, lightning and static)
EN54-10 & CPD approved; IR Flame Detector – Data Sheet
