Ziton Reflective beam detector head (FD805RH-N) and (FD810RH-N)

Description

Ziton Reflective beam detector head (FD805RH-N) and (FD810RH-N)

The FD805RH-N consist of an infrared transmitter and receiver in one compact housing with reflective prisim, for expansion of the FD805R-N or FD810R-N. The FD805R-N or FD810R-N ground level controller is supplied with one detector, and can support one additional FD805RH-N or FD810RH-N unit. The infrared signal from the detector is reflected by a prism and analyzed for smoke presence. It is particularly designed to be used where point smoke detectors are not applicable due to height or inaccessibility. The FD805RH-N also features a motorized head, which allow for auto realignment in cases where gradual building shift occurs.

Installer friendly

Getting the system operational is simplified by a number of groundbreaking features that combine to make the FD805RH-N the quickest and easiest detector of its type to install. Once the detector head is connected, using the Easifit First Fix system, an integral LASER, which is aligned along the optical path of the beam, can be activated. This allows the reflective prism to be sighted quickly and with confidence. Once the LASER has been used to coarsely align the beam, the AutOptimise beam alignment system takes over and automatically steers the beam into the optimum position.

Flexibility

The system can be fully customised, according to the requirements of each installation. Both alarm thresholds (sensitivity) and time to Alarm/Fault can be set from the ground level System Controller. Additionally, the integrated accessory mount allows the use of a variety of standard fittings solve any specific installation issues.

Key Features

EN54/CPD approved

Building Shift Compensation

2-wire Interface from Detector to System controller

Laser Assisted Alignment

Automatic Contamination Compensation

Auto Alignment

Product Codes

Descriptions

FD805RH-N

Reflective beam detector head – 50m

Additional Detector, 8 – 50m, for use w/ FD805R-N or FD810R-N

Additional detector head can be used as to expand the FD805R-N system to two detector heads or a replacement for a faulty detector head.

FD810RH-N

Reflective beam detector head – 100m

Additional Detector, 50 – 100m, for use w/ FD805R-N or FD810R-N

Additional detector head can be used as to expand the FD810R-N system to two detector heads or as a replacement for a faulty detector head.