-
A compact and discrete solution One point of installation for detector, sounder and visual indicator with no additional wiring Reflective Sound Monitoring (RSM) Light is electronically monitored by the control panel Automatic self-test Independent addressable control of the sounder and beacon Built-in line isolator Select the tone, volume and flash rate using panel configuration software 15 selectable tones. Allows users to select the tone with which they are most familiar Realistic conventional bell tone 4 selectable volumes 2 selectable flash rates Different tones can be used for fire alarm and class change VIDs and sounders are synchronised over the entire loop A locking pin supplied with the base which prevents the unauthorized removal of the detector Replace legacy LPSB3000 and LPAV3000 -
A compact and unobtrusive sounder solution Reflective Sound Monitoring (RSM) Light is electronically monitored by the control panel Automatic self-test Indoor and outdoor versions Indoor models can be semi-flush or surface mounted including a choice of shallow or deep back box IP rated option has a deep surface back box Power and data from the loop. No additional wiring or power supplies required Built-in line isolator 16 selectable tones Realistic conventional bell tone 2 selectable volumes 2 selectable flash rates Select the tone volume and flash rate using panel configuration software Independent addressable control of the sounder and beacon Different tones can be used for pre alarm and class change Aesthetically pleasing rectangle wall mount option A locking pin/screw supplied which prevents unauthorized removal
-
Loop Powered - Reduced installation costs High Output/Low consumption - Lower lifetime costs Indoor and Outdoor models - Same sounder tones in all areas Sounder/LED Beacon Version - DDA Compliant 16 Tones and 2 Flash rates - Suits individual requirements Reflective Sound Monitoring RSM - Reassurance that ALL sounders are working Integral Line Isolator - Saves cost and installation time; Models Available
-
Key Features:; Weight 228g Humidity: up to 95% (non- condensing) Operating temperature: -10 Celsius to +55 Use only with ZX/MX Fire Alarm Controllers
-
A compact and discrete solution One point of installation for detector and sounder with no addition wiring Low power with up to 250 sounders on a single loop Provides uncompromised system design solutions Simple to select the tone and volume using switches No special training or tools needed 9 selectable tones 4 selectable volumes A locking pin supplied with the base which prevents the unauthorized removal of the detector Replace legacy 802sb and it is compatible with 800 series detectors. Can be used for service and repair or as part of a planned upgrade path
-
Key Features:; This product is not EN54-23 approved so can’t be used as a VAD EN54-3 approved Large cable access Rear or surface cable entry Loop continuity spring Automatic synchronisation of sounder and strobe Common base with detectors (B501AP) Device protocol is backward compatible through inclusion of both SS CLIP and Advanced Protocols 32 tone selection to cover many markets (on device or from panel) Positive “poke yoke” engagement Address tag for clear indication Anti-tamper feature In-built isolation options Simple familiar rotary wheel address controls
-
Key Features:; This product is not EN54-23 approved so can’t be used as a VAD EN54-3 approved Large cable access Rear or surface cable entry Loop continuity spring Automatic synchronisation of sounder and strobe Common base with detectors (B501AP) Device protocol is backward compatible through inclusion of both SS CLIP and Advanced Protocols 32 tone selection to cover many markets (on device or from panel) Positive “poke yoke” engagement Address tag for clear indication Anti-tamper feature In-built isolation options Simple familiar rotary wheel address controls
-
Key Features:; Large cable access Rear or surface cable entry Loop continuity spring Automatic synchronisation of strobe Positive “poke yoke” engagement Address tag for clear indication Anti-tamper feature Simple familiar rotary wheel address controls Common base with detectors (B501AP) Device protocol is backward compatible through inclusion of both SS CLIP and Advanced Protocols
-
Key Features:; Large cable access Rear or surface cable entry Loop continuity spring Common base with detectors (B501AP) Device protocol is backward compatible through inclusion of both SS CLIP and Advanced Protocols 32 tone selection to cover many markets Address tag for clear indication Anti-tamper feature In-built isolation options Simple familiar rotary wheel address controls
-
Key Features:; Large cable access Rear or surface cable entry Loop continuity spring Common base with detectors (B501AP) Device protocol is backward compatible through inclusion of both SS CLIP and Advanced Protocols 32 tone selection to cover many markets Address tag for clear indication Anti-tamper feature In-built isolation options Simple familiar rotary wheel address controls
-
Key Features:; Large cable access Rear or surface cable entry Loop continuity spring Automatic synchronisation of sounder and strobe Common base with detectors (B501AP) Device protocol is backward compatible through inclusion of both SS CLIP and Advanced Protocols 32 tone selection to cover many markets (on device or from panel) Positive “poke yoke” engagement Address tag for clear indication Anti-tamper feature Simple familiar rotary wheel address controls
-
Key Features:; High output LED technology ensures optimum light output and low power requirements High efficiency piezo disk and horn profile generate powerful sound output Features Advanced protocol controllable sound output, tone selection, group polling, independent sound or strobe function Automatic synchronization of sounder and strobe Large cable access Rear or surface cable entry Loop continuity spring Simple twist fit onto universal B501AP base (positive “poke yoke” engagement) Anti-tamper feature In-built isolation options Address tag for clear indication Single point of installation – saves time, cost & inventory Low current draw enables more devices on loop Adjustable volume control (on device or from panel) Rotary wheels for clear address indication Clear lens with red flash
-
Key Features:; Large cable access Rear or surface cable entry Loop continuity spring Automatic synchronisation of sounder Low current draw enables more devices on loop Adjustable volume control (on device or from panel) Intense strobe output Deep and high IP base options Pure White or Ivory body colours Common base with detectors (B501AP) Device protocol is backward compatible through inclusion of both SS CLIP and Advanced Protocols 32 tone selection to cover many markets (on device or from panel)
-
High output LED technology ensures optimum light output and low power requirements High efficiency piezo disk and horn profile generate powerful sound output Features Advanced protocol controllable sound output, tone selection, group polling, independent sound or strobe function Automatic synchronization of sounder and strobe Large cable access Rear or surface cable entry Loop continuity spring Simple twist fit onto universal B501AP base (positive “poke yoke” engagement) Anti-tamper feature In-built isolation options Address tag for clear indication Single point of installation – saves time, cost & inventory Low current draw enables more devices on loop Adjustable volume control (on device or from panel) Rotary wheels for clear address indication Clear lens with red flash
-
Protec Algo-Tec 6000PLUS Protocol Voice enhanced talking sounder Integrated high intensity LED beacon Seven selectable voice messages Bell sounder Programmable volume control Three fire alarm tones Loop powers Low current consumption Integral short circuit isolator Weather-proof to IP65 Choice of colours
-
Model: SEN-S-VAD-HPR-EP-R Shipping Weight: 200gms
-
Talking Sounder; Integrated Voice Enhanced Sounder Programmable Message Selection Quick and Simple to Install FAST™ Addressing Loop Powered and Integral Short Circuit Isolator Protec Algo-Tec™ 6000PLUS Protocol
-
Talking Sounder; Integrated Voice Enhanced Sounder Visual Alarm Device (VAD) with 7.5m Coverage Diameter Programmable Message Selection LED Technology for Long Service Life Quick and Simple to Install FAST™ Addressing Loop Powered and Integral Short Circuit Isolator Protec Algo-Tec™ 6000PLUS Protocol Approved to EN54 Part 3, 17 & 23
-
Protec Algo-Tec 6000PLUS Protocol Voice enhanced talking sounder Seven selectable voice messages Bell sounder Programmable volume control Three fire alarm tones Low powered Choice of colours Weather-proof to ip65 Low current consumption Integral short circuit isolator
-
Fast™ Addressing Integral Short Circuit Isolator Loop Powered 2.4 metres (m) Mounting Height Adjustable from 7.5 to 5m or 3m Room Coverage Volume Adjustable Flash Rate Approved to EN54 Part 17 & 23
-
Sounder; High Output Electrical Sounder Programmable Volume Control Quick and Simple to Install FAST™ Addressing Loop Powered and Integral Short Circuit Isolator Protec Algo-Tec™ 6000PLUS Protocol
-
Sounder; High Output Electrical Sounder Visual Alarm Device (VAD) with 7.5 Coverage Diameter Programmable Volume Control LED Technology for Long Service Life Quick and Simple to Install FAST™ Addressing Loop Powered and Integral Short Circuit Isolator Protec Algo-Tec™ 6000PLUS Protocol Approved to EN54 Part 3, 17 & 23
-
Fast™ Addressing Integral Short Circuit Isolator Loop Powered Adjustable from 7.5 to 3m Room Coverage Volume 2.4 metres (m) Mounting Height Adjustable Flash Rate Approved to EN54 Part 17 & 23
-
FAST™ Addressing Integral Short Circuit Isolator Loop Powered Adjustable from 7.5 to 3m Room Coverage Volume 3 metres (m) Mounting Height Adjustable Flash Rate Approved to EN54 Part 17 & 23
-
FAST™ Addressing Integral Short Circuit Isolator Loop Powered Adjustable from 7.5 to 3m Room Coverage Volume 3 metres (m) Mounting Height Adjustable Flash Rate Approved to EN54 Part 17 & 23
-
LED Technology for Long Service Life Quick and Simple to Install FAST™ Addressing Loop Powered and Integral Short Circuit Isolator High Output Electronic Sounder 2.4 Metres (m) Mounting Height Adjustable 7m to 5m or 3m Room Coverage Volume Approved to EN54 Part 3, 17 & 23
-
LED Technology for Long Service Life Cost effective installation solution (Talking Sounder and Visual Alarm Device (VAD) in one device) Quick and Simple to Install FAST™ Addressing Loop Powered and Integral Short Circuit Isolator High Output Electronic Sounder 2.4 Metres (m) Mounting Height Approved to EN54 Part 17 & 23
-
LED Technology for Long Service Life Cost effective installation solution (Talking Sounder and Visual Alarm Device (VAD) in one device) Quick and Simple to Install FAST™ Addressing Loop Powered and Integral Short Circuit Isolator High Output Electronic Sounder 2.4 Metres (m) Mounting Height Approved to EN54 Part 17 & 23
-
Protec Algo-Tec 6000 Protocol Loop powered High output electronic sounder High intensity LED beacon Low current consumption Choice of colours Weatherproof to IP65 Integral short circuit isolator
-
LED Technology for Long Service Life Quick and Simple to Install FAST™ Addressing Loop Powered and Integral Short Circuit Isolator High Output Electronic Sounder 2.4 Metres (m) Mounting Height Adjustable 7m to 5m or 3m Room Coverage Volume Approved to EN54 Part 3, 17 & 23
-
Protec Algo-Tec 6000 Protocol Loop Powered High output electronic sounder Low current consumption Integral short circuit isolator Weather-proof to IP65 Choice of colours
-
-
-
Protec Algo-Tec 6000 Protocol Loop powered High intensity LEDs Extremely long service life Integral short circuit isolator Ultra low current consumption Weather-proof to IP65
-
Faster installation - The large cable access, rear or surface cable entry options and innovative loop continuity spring all make for faster more cost effective installation. Reduced install errors and easy fault finding - devices are mounted using a positive push and turn engagement system and are supplied with an address tag for clear identification. Isolation is built-in to each device and addressing is made simple by familiar rotary wheel address controls. In addition each device incorporates an anti-tamper feature giving added security. Excellent system performance - High light output and a selection of 32 sounder tones can be synchronised via the Notifier control panel to provide fast clear warning of a fire related incident. Flexible installation - The low current draw of the devices enables more devices on each loop. This combined with the wide range of devices and mounting options including deep and high IP options, white or red colour options and sounder volume controllable from the panel or the sounder itself all make for greater flexibility for the system designer. Reduced lifetime costs - each device in the Opal AV range is constructed from high quality UV stable materials, designed for impact resistance and years of trouble free operation. If changes to a system are required the universal system base means a sounder/beacon can be added without re-wiring. Reduced inventory count - Notifier’s Opal AV range now utilizes the B501AP system base,- common to detectors. The Opal AV range is designed to maximise the features of Notifier’s advanced digital Opal protocol but remains backward compatible with previous Notifier communication protocols so can be used for retrofit and replacement for older systems. Opal AV devices provide both standard wall mounting units and integrated base units allowing the direct fitting of Notifier detectors. Wall mounting units are available as a sounder, sounder & beacon combination and a beacon only with sounder colour options of both red and white. Integrated base sounder units are also available as either a sounder or a sounder and beacon combination in colours to match the detectors.
-
