-
Key Features:; 2A max. output Includes Mains On and Output Triggered indicators No battery back-up facility -
Activation current – Typically 30mA @ 24VDC Indicators – Red relay activated LED Connections – +V; -V (Supply); NC; C; NO (SW1 & SW2). Contact rating @ 24Vdc is 5A (resistive) 2A (inductive); Contact rating@ 240Vac is 5A (resistive) 2A (inductive) Product dimensions (mm) – 85w x 85h x 27d (mm) can be mounted onto a standard UK 25mm single gang flush or surface back box Construction & finish – White PVC plate; light grey label; silver nickel contacts IP Rating – IP40 Weight – 78g Operating temperature – -10C to +60C
-
-
-
Key Features:; Maximum output 250mA Includes a manual release button, a Mains on and an Output Triggered indicator Can be mounted on a standard 25mm UK double gang flush or surface back box
-
Key Features:; Includes a built-in 24V double pole changeover relay. Provides a stabilised output of 27.6V Mains On, Battery/PSU Fault and Output Triggered indicators. Trigger and hold off inputs can be used to control the internal relay.
-
-
-
-
-
Key Features:; Max operating voltage 27V DC Mounts on a standard UK 18mm single gang flush or surface back box Includes Braille text
-
Key Features:; Typically used under pillows in hotel bedrooms, etc Includes a 2m connection lead (users are advised to leave a minimum amount of the connection lead on the bed to minimise the risk of entanglement)
-
C-Tec BF362-5/E Caged 24v 5A Power Supply
-
C-Tec BF362-3/E Caged 24v 3A Power Supply
-
-
-
Key Features:; Finished in 1.2mm steel Accessory pack includes installation instructions, mounting screws, fixing pads, cable clip and cable tie
-
-
C-Tec BF360-24/E Caged 24v 1.5A Power Supply
-
C-Tec BF360-24 Boxed EN54 24v 1.5a Power Supply Unit (VDS Certified); Low current consumption. Deep discharge battery protection and EN54 compliant flagging of battery impedance faults. Single-pole volt-free changeover relay that switches for any fault condition. Three LED indicators - supply present, general fault and auxiliary fault (for optional connection to third-party equipment). Link selectable battery charging capacity. Optional high-temperature output activates when internal box temperature reaches 55°C, for connection to ventilation fans.
-
C-Tec BF360-12/E Caged 12v 2A Power Supply
-
C-Tec BF360-12 Boxed EN54 12v 2a Power Supply Unit (VDS Certified); Max. physical battery size (with STU plate): 1 x 12V 3 Ah Max. physical battery size (no STU plate): 1 x 12V 7 Ah Standard battery charging capacity: 2 Ah to 12 Ah Output option A: 1.8A DC current, 0.2A charge current Output option B: 1.3A DC current, 0.7A charge current Enclosure size (WxHxD): 380 x 235 x 96mm Physical attributes: Plastic lid and base
-
Includes 10 key hooks for the optional storage of panel access keys, etc Measures 450 x 345 x 95mm and includes two indents for optional customer branding
-
-
-
Key Features:; Fits on a standard UK 47mm flush or surface mount back box. Supplied with 2 x M3.5 25mm fixing screws. BS EN60669-1 compliant.
-
-
-
Metal Enclosure; Width 404mm x Height 404mm x Depth 110mm
-
Plastic/Metal Enclosure; Width 465mm x Height 290mm x Depth 103mm
-
Third-party certified to EN54-3 (Sounders), EN54-23 (VADs) and 17 (Isolators) by Intertek (pending) Provides 'W-2.4-3.5' light distribution when wall mounted (min. 0.4 lux over a 2.4 x 3.5m cuboid area) Can also provide 'C-3-8 light distribution when ceiling mounted (min 0.4 lux over a 3 x 8m cylindrical area) Impressive 90dB(A) sound output @ 1m Unique C-TEC designed lens maximises light output whilst minimising current draw Onboard short-circuit loop isolator 550uA quiescent current 14mA alarm current @24V DC (VAD lit, sounder on max) Attractively finished in red polycarbonate (light output is white) Group addressing facility allows multiple devices to be operated simultaneously 7 selectable volume levels and up to 15 selectable tone pairs Attractive compact design - just 102mm diameter, 63mm deep Includes an integrated sounder to base locking mechanism IP21C rated Low current consumption means multiple devices can be connected to the loop DIP switch addressed Simple ‘click and twist’ design and easy-fit base ensures rapid installation time Also available in a white plastic housing (order code BF451A/CX/SW)
-
Third-party certified to EN54-3 (Sounders), EN54-23 (VADs) and 17 (Isolators) by Intertek (pending) Provides 'C-3-8 light distribution when ceiling mounted (min 0.4 lux over a 3 x 8m cylindrical area) Can also provide 'W-2.4-3.5' light distribution when wall mounted (min. 0.4 lux over a 2.4 x 3.5m cuboid area) Impressive 90dB(A) sound output @ 1m Unique C-TEC designed lens maximises light output whilst minimising current draw Onboard short-circuit loop isolator 550uA quiescent current 14mA alarm current @24V DC (VAD lit, sounder on max) Attractively finished in white polycarbonate (light output is white) Group addressing facility allows multiple devices to be operated simultaneously 7 selectable volume levels and up to 15 selectable tone pairs Attractive compact design - just 102mm diameter, 63mm deep Includes an integrated sounder to base locking mechanism IP21C rated Low current consumption means multiple devices can be connected to the loop DIP switch addressed Simple ‘click and twist’ design and easy-fit base ensures rapid installation time Also available in a red plastic housing (order code BF451A/CX/SR)
-
Third-party certified to EN54-3 (Sounders) and EN54-17 (Isolators) by Intertek (pending) Impressive 90dB(A) sound output @ 1m Onboard short-circuit loop isolator 5mA alarm current @24V DC (sounder on max) Attractively finished in white polycarbonate Group addressing facility allows multiple devices to be operated simultaneously 7 selectable volume levels and up to 15 selectable tone pairs Attractive compact design - just 102mm diameter, 63mm deep Includes an integrated sounder to base locking mechanism IP21C rated Low current consumption means multiple devices can be connected to the loop DIP switch addressed Simple ‘click and twist’ design and easy-fit base ensures rapid installation time Also available in a red plastic housing (order code BF450A/CX/SR)
-
Third-party certified to EN54-3 (Sounders) and EN54-17 (Isolators) by Intertek (pending) Impressive 90dB(A) sound output @ 1m Onboard short-circuit loop isolator 5mA alarm current @24V DC (sounder on max) Attractively finished in red polycarbonate Group addressing facility allows multiple devices to be operated simultaneously 7 selectable volume levels and up to 15 selectable tone pairs Attractive compact design - just 102mm diameter, 63mm deep Includes an integrated sounder to base locking mechanism IP21C rated Low current consumption means multiple devices can be connected to the loop DIP switch addressed Simple ‘click and twist’ design and easy-fit base ensures rapid installation time Also available in a white plastic housing (order code BF450A/CX/SW)
-
Key Features:; Third-party certified to the relevant parts of EN54 in conjunction with our ActiV detectors Easy to fit with lots of working space Can be ceiling mounted in any orientation due to the true 360° degree viewing angle of the LED indicator strips on all ActiV detectors Integrated detector/base locking mechanism, head removal tool and ID tag Simple ‘click and twist’ design Remote LED terminals for the optional connection to a BF318 Remote indicator Bright tin plated steel terminals can accept fire rated cable of up to 2.5mm in diameter C4408D diode and C4408 non-diode bases available* Compatible with C-TEC’s entire range of ActiV conventional smoke and heat detectors
-
A high-quality optical smoke detector offering outstanding detection performance at a very competitive price Manufactured by C-TEC in the UK Third-party certified to EN54-7 by Intertek Carries the pan-European ‘CertAlarm’ mark Wide 6-33V DC operating voltage Two 8mm x 2mm ultra-bright red LED indicating strips offering 360º visibility Drift compensation functionality ensures detector sensitivity is automatically calibrated to suit prevailing conditions and/or increased contamination levels Compatible with our ActiV C4408D diode, C4408 non-diode and C4408R relay bases (all bases include an integrated detector/base locking mechanism and ID tag) Class A1 fixed heat, class B fixed heat, class A1R rate-of-rise and multi-sensor variants also available Excellent discounts for quantity orders
