-
Product Description The Edwards EST 276B-RSB is a red Surface Mount Backbox designed for use with Edwards 27x Series Manual Pull Stations. -
Product Description Edwards 278B-1110 Fire Alarm Pull Station
-
Product Description Edwards EST 278B-2320 Fire Alarm Pull Station
-
Product Description The Edwards 279B-1110 is a Fire Alarm Pull Station, Double Action, Finish Red, Surface or Flush Mounting.
-
Product Description The Edwards EST 279B-1120 Non-coded Manual Pull Station is a Double Action Pull Station, Double Pole, Open Circuit, with Key Reset. ACCESSORIES — 276-GLR Replacement Glass Rods — 276-K1 Station Reset Key, Supplied with all Key Reset Stations — 276-K2 General alarm key — K-276B-RSB Red Surface Back Box NOTE: See also Edwards EST 278B-1120 Non-coded Manual Pull Station.
-
Product Description Edwards EST 282B is a 194 degree fixed temperature and rate-of-rise thermal sensor.
-
Product Description The Edwards 283B-PL is a Heat Detector (135F Fixed) Fixed Temp rating: 135F Single circuit normally open contact rated at 3 amps at 6 to 125V AC; 1.0 amps at 6 to 28V DC, 0.3 amps at 125V DC, and .01 amps at 250V DC Includes: 280A-PL Plastic Mounting Plate. Detector twists and locks onto mounting plate. Mounting plate may be surface mounted or mounted onto any 3 1/4" (83mm) or 4" (102mm) octagon box. Replaces the Edwards EST 281B-PL.
-
Product Description The Edwards 284B-PL is a Heat Detector Fixed Temp rating: 194F Single circuit normally open contact rated at 3 amps at 6 to 125V AC; 1.0 amps at 6 to 28V DC, 0.3 amps at 125V DC, and .01 amps at 250V DC Includes: 280A-PL Plastic Mounting Plate. Detector twists and locks onto mounting plate. Mounting plate may be surface mounted or mounted onto any 3 1/4" (83mm) or 4" (102mm) octagon box.
-
Product Description The EST (GE) 3-12SG [NEW] features.12 switches with 12 Green LED Display/Control Module Intended for use with EST3 Remote Annunciators.
-
Product Description Edwards EST 3-ANNCPU3 Annunciator CPU is intended for use with Edwards EST EST3 Remote Annunciators.
-
Product Description Edwards 3-ANNSM Annunciator Support Module
-
-
-
Product Description This is the Replacement Board for the Edwards EST EST3 Multiplexed Fire Alarm Control Panel. The Edwards EST 3-CPU3 Central Processor Module is the control element for all rail modules and control/display modules installed in a EST3 Multiplexed Fire Alarm Control Panel. NOTE: The 3-CPU3 is a replacement for the 3-CPU module and the 3-CPU1 module.
-
Product Description Edwards EST 3-DSDC1 is a Signature (Dual) driver controller module.
-
Product Description Edwards EST 3-LCD Liquid Crystal Display Module is the primary user interface in the EST3 Life Safety System.
-
Product Description Edwards EST 3-LCDANN is a Remote LCD Command Module Annunciator. Features standard 3-LCD (168 characters) and large-format 3-LCDXL1 (960 character) display options. For use with EST3 FACPs. Includes CPU, LCD display and doors. Order wallbox separately.
-
Product Description Edwards EST GE 3-MODCOM
-
Product Description Edwards EST 3-PPS/M Primary Power Supply w/ local rail module, 120V 50/60 Hz. The primary power supply provides the system with battery charging and voltage regulation for EST 3 FACPs.
-
Product Description The Edwards EST 3-RS232 Ancillary Communications Card enables connection to serial devices and uses Class B configuration.
-
Product Description Edwards 3-SDC1 Driver Controller Module
-
Product Description The Edwards EST 3-SSDC1 Single Signature Driver Controller modules provides an intelligent interface between the 3-CPU3 module and Signature Series devices.
-
Product Description Edwards EST 3-ZA40A Zoned Audio Amplifier Module 40 Watt Zoned Amplifier w/Class A/B (Style Z/Y) Audio & Class A/B (Style Z/Y) 24 VDC outputs
-
-
Product Description Edwards 323D-10AW 10-inch Gray Bell
-
Product Description The Edwards EST 323D-10AW-R is a Red 10-Inch Single Stroke Fire Bell. 20-24VDC
-
Product Description Edwards 325-6C5 6-inch Gray Bell 6v 1.25amp
-
Product Description The Edwards 328A-FB Chime is an Audible Signal Appliance. 7Volt, 2.5Amp, 50/60Hz
-
Product Description The Edwards 340-10N5 is a grey 10-inch Vibrating Bell, suitable for outdoor use. 120 VAC 50/60 Hz, 0.070 A
-
Product Description The Edwards 349 Weatherproof Mounting Back Box is intended for use with: —6” bells —10” bells —340 bells —Edwards 5520 Duotronic horn/siren
-
Product Description The Edwards EST 405-7A-T is a red Weatherproof Strobe. 15/75 Candela. Compatible Synchronization Module EG1M-RM. Use with Weatherproof Mounting Boxes Models 348 / 349 / 449 (sold separately).
-
Product Description Edwards 439D-10AW-R Red Bell
-
Product Description Edwards 439D-6AW 6-inch (24V) Grey Bell
-
Product Description The Edwards EST 439D-6AW-R is a Fire Alarm Bell/Diode Polarized Vibrating Bell, designed for use with fire alarm control equipment. Mounting plate (included) installs directly on surface or on any single gang box or on any 3-1/2-inch (89mm) or 4-inch (102mm) octagon or 4-inch (102mm) square electrical box. The fire alarm bell is audible signaling appliance for installations that operate in conjunction with an installed fire alarm panel and detection devices. Rated for outdoor use with optional back box 20 to 24VDC Voltage, 0.85A Current
-
Product Description Edwards EST 439D-8AW-R is an 8-inch Alarm Bell, 24VDC, Red
-
Product Description Edwards 439DEX-6AW Grey Bell
