-
Product Description The Edwards 897B-004 is a red Surface Backbox. Dimensions: 4.5 X 6.5 X 2.75" -
Product Description Edwards 897B-005 Surface Backbox
-
Product Description Edwards 941-N5 Relay: 120v 60hz
-
-
Product Description Edwards 98BC-G1 Light Duty Strobe, Weatherpoof
-
Product Description The Edwards EST AB4G-SB Surface Backbox is compatible for use with AB4G Audible Detector Base.
-
-
Product Description The Edwards EST B210LPF is a Plug-In Detector Base intended for use in 2-wire intelligent systems with screw terminals provided for power (+ and -) and remote annunciator connections. Communication takes place over the power lines.
-
Product Description The EST BPS-10A Booster Power Supply (10 amp) is designed to extend the signaling capacity of a fire alarm, security, or access control system. The BPSs can be connected to existing Class A or Class B notification appliance circuits (NACs) or activated via option modules. The BPSs can either pass or generate synchronization signals for Genesis sync strobes. The BPSs have four independent NAC/AUX circuits that are supervised when configured for NAC, plus a trouble relay. The input circuits of the booster power supply can be connected to 12 VDC or 24 VDC systems.
-
Product Description The EST BPS6A Booster Power Supply (6.5 amp) is designed to extend the signaling capacity of a fire alarm, security, or access control system. The BPSs can be connected to existing Class A or Class B notification appliance circuits (NACs) or activated via option modules. The BPSs can either pass or generate synchronization signals for Genesis sync strobes. The BPSs have four independent NAC/AUX circuits that are supervised when configured for NAC, plus a trouble relay. The input circuits of the booster power supply can be connected to 12 VDC or 24 VDC systems. Cabinet included.
-
Product Description The Edwards EST BPSIM is a Booster Power Supply Interface Module for use in Edwards EST Fire Alarm Control Panels.
-
Product Description The Edwards EST BPSIMA is a Class "A" Booster Power Supply Interface Module.
-
Product Description Edwards EST's CSBU-1 Standard Detector Base is designed for use with Edwards / EST's EC Series Smoke and Heat Detectors. Provides plug-in tamper-resistant mounting. Includes screw terminals for connection of installation wires. COMPATIBLE EC SERIES DETECTOR HEADS: — EC30U-3 Low-profile plug-in Photoelectric Detector — EC10C-3 Low-profile Plug-in Ionization Detector — EC20FTU-3 Low-profile Plug-in Fixed Temperature Heat Detector — EC20RRU-3 Low-profile Plug-in Rate-of-Rise Heat Detector COMPATIBLE ACCESORIES: — C-TRIM Trim skirt for CSBU-1 base — EC-LED Remote alarm LED indicator
-
Product Description Edwards EST DHS-1224C Chrome Door Holder
-
Product Description The Edwards EST CSBU-3 is a plug-in Detector Base (w/ Resistor) is intended for use with the EC Series of low-profile plug-in smoke and heat detectors from Edwards EST.
-
Product Description The Edwards E-270 Addressable Manual Pull Station is a normally open dry contact initiating device that requires one action by the user to initiate an alarm. Rotary Addressing for use with Edwards Signalling intelligent systems.
-
Product Description The Edwards EST E-NAC Analog NAC Module is an analog addressable device used to connect a supervised output circuit to a signal riser. The output wiring is monitored for open and short circuits. A short circuit causes the module to inhibit the activation of the audible/visual signal circuit so the riser is not connected to the wiring fault. Upon command from the control panel, the module connects the output circuit to the riser input. The output circuit energizes a riser to operate polarized audible and visual signals. The module can be used for connection of a Class A or Class B (with EOL) output notification appliance circuit (NAC). The device address is set using the two rotary switches located on the front of the module. One device address is required.
-
Product Description Edwards EC-LED Remote Alarm Indicator
-
Product Description Edwards EST EC20RRU-3 Heat Detector
-
-
Product Description Edwards EST EG4F-S7 70-volt Speaker (White) is part of the Genesis G4 Series of Speakers and Strobes.
-
Product Description The Edwards EST ESD-4WJ SuperDuct Four-Wire Duct Smoke Detector is a combination four-wire controller and sensor with RJ-45 modular connectors. COMPATIBLE ACCESSORIES: — SD-T8 Air sample tube, 8 inch — SD-T18 Air sample tube, 18 inch — SD-T24 Air sample tube, 24 inch — SD-T36 Air sample tube, 36 inch — SD-T42 Air sample tube, 42 inch — SD-T60 Air sample tube, 60 inch — SD-T78 Air sample tube, 78 inch — SD-T120 Air sample tube, 120 inch — SD-RJ15 RJ45 wiring harness kit -- 15 ft. — SD-RJ10 RJ45 wiring harness kit -- 10 ft. — SD-RJ5 RJ45 wiring harness kit -- 5 ft. — SD-TRM4 Remote test/reset station, magnetic — SD-TRK4 Remote test/reset station, keyed — 5956A Remote LED Alarm Indicator
-
Product Description The Edwards EST ESD-SJ SuperDuct Duct Smoke Detector is a four-wire smoke sensor with RJ-45 modular connector for use with SuperDuct Series Duct Smoke Detectors.
-
Product Description The Edwards EST F-DACT is a digital alarm communicator transmitter for use with F-series fire alarm control panels. The F-DACT can be programmed to operate as a single or dual line DACT/Modem/LCD display, a Modem/LCD display, or an LCD display only.
-
Product Description The Edwards EST / GE F-XTR120 NAC Power Expander Transformer is intended for use with 10-zone, 120VAC F-Series fire alarm control panels. p/n 3101035
-
Product Description This is the replacement board for the EST Fireshield FS1004 (10-zone) fire alarm control panel; supports 10 initiating device circuits and 4 notification appliance circuits. Panel is configured for Class B operation. Can be converted to Class A by using two Class B circuits to make one Class A circuit. COMPATIBLE (OPTIONAL) ACCESSORIES: — Remote System Indicator (FSRSI) — Remote Zone Indicator (FSRZI-A) — Remote Relay Module (FSRRM) — Power Expander Transformer (XTR3A120, XTR3A230) — DACT (Dialer)/Modem (FSDACT) — City Tie Module (CTM4.7) — Reverse Polarity Module (RPM) — Battery Cabinet (BC-2)
-
Product Description The Edwards EST FS1004RD FireShield is a 10-Zone conventional FACP with FSDACT. Supports 10 IDCs and 4 NACs. Red Cabinet enclosure included.
-
Product Description The Edwards EST FSAT3 is a Remote Annunciator Wall Plate, Three Gang (White) for use with FSRSI and FSRZI-A Remote Annuciators.
-
-
Product Description NOTE: This part is discontinued by the manufacturer. No direct replacement recommended. The Edwards EST FSP502GD FireSheild Plus (FACP) is a Conventional Fire Alarm Control Panel – 5 Class B IDCs and 2 Class B NACs (Pairs of IDCs and NACs convertible to single Class A circuits) 120VAC operation "GD" = Includes Grey Cabinet and Dialer
-
Product Description NOTE: This part is discontinued by the manufacturer. No direct replacement recommended. The Edwards EST FSP502R FireSheild Plus (FACP) is a Conventional Fire Alarm Control Panel – 5 Class B IDCs and 2 Class B NACs (Pairs of IDCs and NACs convertible to single Class A circuits) 120VAC operation "R" = Red Cabinet
-
-
Product Description The Edwards EST G1-HDVM is a white multi-candela Horn Strobe for wall mounting, 24VDC
-
Product Description Edwards EST G1-P is a white 24VDC Genesis Steady Horn designed for wall mounting. COMPATIBLE ACCESSORIES: — 27193-16 One-gang Surface Mount Box (white) — G1T Genesis Trim Plate for 2-gang or 4" square boxes (white) — G1T-FIRE Genesis Trim Plate with “FIRE” markings for 2-gang or 4" square boxes (white) — G1T-SB Surface box used for surface mounting (white) NOTE: The G1-P is not compatible with Genesis Signal Master.
-
Product Description Edwards EST G1-VM Genesis Multi-CD Strobe features selectable 15, 30, 75, or 110 cd output. VOLTAGE: non-coded, filtered 16 - 33 Vdc or unfiltered 16-33 Vdc FWR COMPATIBLE SYNCHRONIZATION MODULES: —G1M Genesis Signal Master — Snap-on Mount —G1M-RM Genesis Signal Master — Remote Mount (1-gang) —SIGA-CC1S Intelligent Synchronization Output Module (2-gang) —SIGA-MCC1S Intelligent Synchronization Output Module (Plug-in UIO)
-
