-
EN54-23 certified Flash rate of 0.5Hz It is possible to set individual volume of the sounder from the panel 15 pairs of tones including IMO code 1A 'General Emergency Alarm' and IMO Code 2 'All Clear' Built in isolator; Brand Information -
Key Features: EN54-23 certified Flash rate of 0.5Hz It is possible to set individual volume of the sounder from the panel 15 pairs of tones including IMO code 1A 'General Emergency Alarm' and IMO Code 2 'All Clear' Built in isolator
-
Key Features: Resettable operating element Easy access, front reset mechanism E-Z fit connector system for installation Ergonomic reset key EN 54-11 & EN 54-17 Certified (Red version only) 170 viewable LED Continuity link for cable insulation testing Suitable for semi flush or surface mounting
-
Key Features:; Resettable operating element Easy access, front reset mechanism E-Z fit connector system for installation Ergonomic reset key EN 54-11 & EN 54-17 Certified (Red version only) 170° viewable LED Continuity link for cable insulation testing Suitable for semi flush or surface mounting; The address of each call point is set at the commissioning stage by means of a DIL switch. A solid red alarm LED is provided on the manual call point. This LED is controlled independently of the call point, by the control panel. The LED will flash yellow if there is a fault and flash green when the device is polled. Discovery and CoreProtocol configurable. Once activated, the Intelligent Manual Call Point can be reset by inserting the reset key into the front facing LED, turning clockwise until a positive click and reset occurs. The Intelligent Manual Call Point incorporates a short circuit isolator which will ensure its operation in the event of a short circuit fault on the loop. Isolator operation is indicated by a solid yellow LED. This manual call point helps reduce installation time as all the initial installation cabling is wired to a removable terminal block which fits neatly in the back of the manual call point.
-
Application:; Allows multiple interfaces to be housed together IP67 rated; DIN-Rail Enclosure - Data Sheet
-
Key Features Allows multiple Interfaces to be housed together IP67 Rated
-
No need for separate backbox Can be used with tiles up to 25mm thick Quick and easy installation
-
-
Protects against water ingress Improved performance Available in polycarbonate or metal Polycarbonate deckhead mounting box (45681-217) also fits Apollo audio visual bases when used with the accessory kit (45681-218); Weight of Deckhead Mounting Box: Backbox 100g Extension sleeve 23g Adaptor Ring 29g
-
Key Features Protects against water ingress Improved performance Available in polycarbonate or metal Polycarbonate deckhead mounting box (45681-217) also fits Apollo audio visual bases when used with the accessory kit (45681-218) Additional Information 3 Weight of Deckhead Mounting Box: Backbox 100g Extension sleeve 23g Adaptor Ring 29g
-
-
-
-
Key Features:; Selectable output options: Conventional two-wire, 4-20mA, Latching or Non-latching, Relay Contacts - Fire/Fault, Pre alarm Class 1 sensitivity to EN54-10 detects 0.1m2 fire at 25m High optical interference immunity Selectable response speed Optical self-test Low power consumption IP65 rated Supply voltage 14 to 30Vdc Operating temperature -10°C to +55°C Operating temperature -10°C to +55°C; Apollo - Product Datasheet Apollo - Installation Guide Apollo - Datasheet
-
Key Features: Selectable output options: Conventional two-wire, 4-20mA, Latching or Non-latching, Relay Contacts - Fire/Fault, Pre alarm Class 1 sensitivity to EN54-10 detects 0.1m2 fire at 25m High optical interference immunity Selectable response speed Optical self-test Low power consumption IP65 rated Supply voltage 14 to 30Vdc Operating temperature -10C to +55C Operating temperature -10C to +55C
-
Key Features:; Selectable output options: Conventional two-wire, 4-20mA, Latching or Non-latching, Relay Contacts - Fire/Fault, Pre alarm Class 1 sensitivity to EN54-10 detects 0.1m2 fire at 25m High optical interference immunity Selectable response speed Optical self-test Low power consumption IP65 rated Supply voltage 14 to 30Vdc Operating temperature -10°C to +55°C; Apollo - Installation Guide Apollo - Flame Detector Datasheet
-
Key Features: Selectable output options: Conventional two-wire, 4-20mA, Latching or Non-latching, Relay Contacts - Fire/Fault, Pre alarm Class 1 sensitivity to EN54-10 detects 0.1m2 fire at 25m High optical interference immunity Selectable response speed Optical self-test Low power consumption IP65 rated Supply voltage 14 to 30Vdc Operating temperature -10C to +55C
-
Key Features; Enables compliance with the ATEX directive; Apollo - Galvanic Barrier Datasheet
-
Key Features Enables compliance with the ATEX directive
-
Key Features:; Red LED indicator 'Plug and Play' terminal connections for fast wiring Resettable element
-
Key Features: Red LED indicator 'Plug and Play' terminal connections for fast wiring Resettable element
-
Key Features:; Red LED indicator 'Plug and Play' terminal connections for fast wiring Resettable element
-
-
Key Features:; Red LED indicator 'Plug and Play' terminal connections for fast wiring Resettable element
-
Key Features:; Selectable output options: Conventional two-wire, 4-20mA, Latching or Non-latching, Relay Contacts - Fire/Fault, Pre alarm Class 1 sensitivity to EN54-10 detects 0.1m2 fire at 25m High optical interference immunity Selectable response speed Optical self-test Low power consumption IP65 rated Supply voltage 14 to 30Vdc Operating temperature -10°C to +55°C; Apollo - Conventional IR Installation Guide Apollo - IR Flame Detector - Datasheet Apollo - Conventional IR Flame Detector -Datasheet
-
Key Features; Easy to install Aesthetically pleasing Colour matched to detector and base
-
Uses high intensity LED (white flash only) EN 54-23 Compliant Category C. VAD Coverage C-3-8.5 Automatic LED check when VAD activated Flash rate 0.5Hz Fault signal if LED check failed Locking mechanism (grub screw) Wide angle of visibility Synchronised with the Apollo Protocol
-
Uses high intensity LED (white flash only) EN 54-23 Compliant Category C. VAD Coverage C-3-8.5 Automatic LED check when VAD activated Flash rate 0.5Hz Fault signal if LED check failed Locking mechanism (grub screw) Wide angle of visibility Synchronised with the Apollo Protocol
-
EN54-23 approved Flash rate of 0.5Hz Synchronisation of VAD flash Individual and group addressing Unique VAD self-test Loop-powered Built in isolator
-
Key Features: EN54-23 approved Flash rate of 0.5Hz Synchronisation of VAD flash Individual and group addressing Unique VAD self-test Loop-powered Built in isolator
-
A value of 1 (=Sounder fault) this means there was no sound detected in 5 seconds of the sounder being switched on. A value of 2 (=VAD fault) means there is no current being drawn by the LED’s. A value of 3 (=Sounder and VAD fault) where neither of the above elements are operating correctly.; EN54-23 approved Flash rate of 0.5Hz Synchronisation of 'alert' and 'evacuate' tones Synchronisation of visual indicator flash Individual and group addressing Unique acoustic and VAD self-test Built in isolator
-
Key Features: EN54-23 approved Flash rate of 0.5Hz Synchronisation of 'alert' and 'evacuate' tones Synchronisation of visual indicator flash Individual and group addressing Unique acoustic and VAD self-test Built in isolator
-
Product Information
-
Product Information
-
Auto-compensates for building movement and contamination Integral laser and auto-align enable quicker installation Low-level system controller with LCD display and user-friendly interface
-
Protects against dust and dirt ingress Improved performance Fits Discovery, XP95, Orbis, Series 65 and AlarmSense bases
