-
Product Description The Edwards EST SIGA-270 is a one stage intelligent Manual Pull Station compatible for use only with the Signature Loop Controller. One pull on the station handle breaks the glass rod and triggers an alarm. Microprocessor stores programmable address, serial number, type of device, job number, hours of operation, last maintenance date, number of alarms and troubles, and time and date of last alarm. One device address is required. The loop controller assigns an address to the station automatically. A custom address can be assigned to the station via laptop computer; no addressing switches are used. -
Product Description The Edwards EST SIGA-270P is a Single Action Two Stage (Presignal) Manual Pull Station compatible for use only with the Signature Loop Controller. Microprocessor stores programmable address, serial number, type of device, job number, hours of operation, last maintenance date, number of alarms and troubles, and time and date of last alarm. One device address is required. The loop controller assigns an address to the station automatically. A custom address can be assigned to the station via laptop computer; no addressing switches are used.
-
Product Description Edwards EST SIGA-278 Fire Alarm Pull Station is an addressable contemporary style manual station made from durable red colored lexan. Signature Series manual stations are compatible only with EST’s Signature Loop Controller. The loop controller electronically addresses each manual station. Mounts to 2½ inch (64 mm) deep single-gang boxes.
-
Product Description Edwards EST SIGA-AA30 Intelligent Audio Amplifier – 30 Watt. Two riser inputs, 1/25 Vrms. Output selectable 25/70 Vrms. Communicates with panel via Signature or GSA Data Circuit. . COMPATIBLE power sources — System power, MIRMIRBPS6A/10A, APS6A/10A; SIGA-APS (for retrofit only) COMPATIBLE enclosures — 2-WB3(R), 2-WB7(R), RACCR, APS6A, APS10A
-
Product Description Edwards EST SIGA-AA50 Intelligent Audio Amplifier Board
-
Product Description The Edwards EST SIGA-AB4G Audible (Sounder) Detector Base is designed for use with Signature Series detectors and GE's Signature Loop Controller. The sounder base uses two reversible jumpers to select any one of four outputs: 1—High dBA; Temporal Tone output (default). 2—High dBA; Steady Tone output. 3—Low dBA; Temporal Tone output. 4—Low dBA; Steady Tone output. For use with Edwards / EST Signature Series detectors: — SIGA-IS Ionization Smoke Detector — SIGA-PS Photoelectric Smoke Detector — SIGA-PHS Combination Photoelectric Smoke and Fixed-Temperature Heat Detector — SIGA-IPHS Combination Ionization, Photoelectric, and Thermal Boost Type Smoke Detector — SIGA-HFS Fixed-Temperature Heat Detector — SIGA-HRS Combination Rate-of-Rise, and Fixed-Temperature Heat Detector
-
Product Description The Signature Series model SIGA-AB4GT CO Compatible Sounder Base is a sounder base specifically designed for use with CO sensors. It is not compatible with a coded system. The base uses the same address and programming label as the detector it supports. It requires a SIGA-TCDR Temporal Pattern Generator to add the audible output function to any Signature Series detector
-
Product Description The Edwards EST SIGA-APS Intelligent Auxiliary Power Supply is a switch mode supply that provides additional power for any Fire Alarm Control Panel that contains a Signature Data Circuit. May be mounted remotely to supply power to remote signaling devices, amplifiers or system equipment. Takes two input module addresses, provides power supply status to control panel 6.4 Amp output provided through two 3.2 Amp output taps Charges up to 10 Amp-Hour Batteries
-
Product Description Edwards EST SIGA-CC1 Single Input Signal Modules are intelligent addressable devices used for connecting a supervised Class B signal or audio speaker to their respective power inputs on command from the loop controller. In addition, the SIGA-CC1 can connect telephone circuits to power inputs on command from the loop controller. See also SIGA-MCC1 for equivalent product.
-
Product Description Edwards EST SIGA-CC1S Sync Module
-
Product Description Edwards EST SIGA-CC2 Dual Input Signal Module
-
Product Description The Control Relay Module Model EST SIGA-CR, is a component of the Signature Series System. The SIGA-CR is an addressable device used to provide one Form "C" dry relay contact to control external appliances (door closers, fans, dampers, etc.) or equipment shutdown. The Edwards EST SIGA-CR requires the Signature Loop Controller. Can be mounted in a North American 2-1/2" (64 mm) deep 1-gang box, or standard 4" square 1-1/2" (38 mm) deep box with 1-gang cover.
-
Product Description Edwards EST SIGA-CRR Polarity Reversal Relay Module is an addressable device that is used to power and activate the audible sounder in Signature audible detector bases. The module can support a 2A load of bases. Upon command from the loop controller, the SIGA-CRR module relay transfers, reversing the polarity of its 24VDC output.
-
Product Description Edwards EST SIGA-CT1 Single Input Module is an intelligent analog addressable device used to connect a Class B normally-open Alarm, Supervisory, or Monitor type dry contact Initiating Device Circuit (IDC); uses one module address Designed for use with Signature Loop Controller only. Mounts to standard single gang electrical boxes.
-
Product Description The Edwards EST SIGA-CT2 Dual Input Module is an intelligent analog addressable device used to connect one or two Class B normally-open Alarm, Supervisory, or Monitor type dry contact Initiating Device Circuits (IDC). For use exclusively with Edwards / EST’s Signature Loop Controller.
-
Product Description The Edwards EST SIGA-DH Duct Detector Housing is specially designed exploit all the capabilities of Signature Series intelligent photoelectric and multisensor smoke detectors. Five one-gang knockouts on the 16 gauge steel housing provide a location for mounting intelligent Signature Series modules. The Edwards EST SIGA-DH Duct Housing comes with a 6 inch (150 mm) exhaust tube. Air sampling tubes are available in lengths from 8 inches (200 mm) to 10 feet (3048 mm) and must be ordered separately.
-
Product Description The SIGA-DTS Duct Test Station uses a key switch along with an integral intelligent input module mounted on a two-gang plastic plate. It is supplied with two keys and features a red alarm LED. When the key is turned to the “TEST” position, the LED lights and the integral module remotely inputs a duct detector test alarm. The Duct Test Station mounts to standard 2-inch deep North American two-gang and 4-inch square electrical boxes and European 100 mm square boxes.
-
Product Description The Edwards EST SIGA-HDT Signature Handheld Diagnostic Tool is designed to help users locate and resolve issues during installation or on an existing system. The tool can be used to initialize a Signature loop before connecting to a control panel or it can be used for diagnosis of an existing loop. The SIGA-HDT is shipped with the Signature Diagnostic Tool Software (p/n 7350894) which is compatible with Windows 7 and 10 Operating systems.
-
Product Description The Edwards EST SIGA-HFD Intelligent Fixed Temp Heat Detector is designed for use with the Signature Loop Controller. COMPATIBLE BASES and ACCESSORIES: — SIGA-SB Detector Mounting Base - Standard — SIGA-SB4 4-inch Detector Mounting Base w/ SIGA-TS4 Trim Skirt — SIGA-RB Detector Mounting Base w/Relay — SIGA-RB4 4-inch Detector Mounting Base w/Relay w/ SIGA-TS4 Trim Skirt — SIGA-IB Detector Mounting Base w/Fault Isolator — SIGA-IB4 4-inch Detector Mounting Base w/ Fault Isolator and SIGA-TS4 Trim Skirt — SIGA-LED Remote Alarm LED. (Connects to the SIGA-SB or SIGA-SB4 Standard Base only.) — SIGA-AB4G Audible (Sounder) Base for Fire Detectors — SIGA-AB4GT Audible (Sounder) Base for CO and Fire Detectors — SIGA-TCDR Temporal Pattern Generator — SIGA-CRR Polarity Reversal Relay can be used for sounding to other audible bases on the same 24 Vdc circuit. — SIGA-TS4 Trim Skirt (supplied with 4-inch bases) — SIGA-DMP Detector Mounting Plate — SIGA-RTA Detector Removal Tool — SIGA-VA Detector Cleaning Tool
-
Product Description NOTE: This part is discontinued by the manufacturer. Replace with: SIGA-HFD Edwards EST SIGA-HFS Fixed Temp Heat Detector is an intelligent addressable device featuring a microprocessor which minimizes false alarms. Compatible only for use with Edwards EST Security’s Signature Loop Controller. COMPATIBLE BASES and ACCESSORIES: — SIGA-SB Detector Mounting Base - Standard — SIGA-SB4 4-inch Detector Mounting Base w/ SIGA-TS4 Trim Skirt — SIGA-RB Detector Mounting Base w/Relay — SIGA-RB4 4-inch Detector Mounting Base w/Relay w/ SIGA-TS4 Trim Skirt — SIGA-IB Detector Mounting Base w/Fault Isolator — SIGA-IB4 4-inch Detector Mounting Base w/ Fault Isolator and SIGA-TS4 Trim Skirt — SIGA-LED Remote Alarm LED. (Connects to the SIGA-SB or SIGA-SB4 Standard Base only.) — SIGA-AB4G Audible (Sounder) Base for Fire Detectors — SIGA-AB4GT Audible (Sounder) Base for CO and Fire Detectors — SIGA-TCDR Temporal Pattern Generator — SIGA-CRR Polarity Reversal Relay can be used for sounding to other audible bases on the same 24 Vdc circuit. — SIGA-TS4 Trim Skirt (supplied with 4-inch bases) — SIGA-DMP Detector Mounting Plate — SIGA-RTA Detector Removal Tool — SIGA-VA Detector Cleaning Tool
-
Product Description Edwards EST SIGA-HRD Fixed Temp / RoR Heat Detector is designed for use with the Signature Loop Controller. COMPATIBLE BASES and ACCESSORIES: — SIGA-SB Detector Mounting Base - Standard — SIGA-SB4 4-inch Detector Mounting Base w/ SIGA-TS4 Trim Skirt — SIGA-RB Detector Mounting Base w/Relay — SIGA-RB4 4-inch Detector Mounting Base w/Relay w/ SIGA-TS4 Trim Skirt — SIGA-IB Detector Mounting Base w/Fault Isolator — SIGA-IB4 4-inch Detector Mounting Base w/ Fault Isolator and SIGA-TS4 Trim Skirt — SIGA-LED Remote Alarm LED. (Connects to the SIGA-SB or SIGA-SB4 Standard Base only.) — SIGA-AB4G Audible (Sounder) Base for Fire Detectors — SIGA-AB4GT Audible (Sounder) Base for CO and Fire Detectors — SIGA-TCDR Temporal Pattern Generator — SIGA-CRR Polarity Reversal Relay can be used for sounding to other audible bases on the same 24 Vdc circuit. — SIGA-TS4 Trim Skirt (supplied with 4-inch bases) — SIGA-DMP Detector Mounting Plate — SIGA-RTA Detector Removal Tool — SIGA-VA Detector Cleaning Tool NOTE: Replaces SIGA-HFS & SIGA-HRS
-
Product Description Edwards EST SIGA-IB Isolator Detector Base is intended for use with Signature Series Sensors. Includes a built-in line fault isolator for use on Class A circuits. A detector must be installed for it to operate. The isolator base does not support the SIGA-LED Remote LED.
-
Product Description Edwards EST SIGA-IB4 4-inch Isolator Detector Base is intended for use with Signature Series Sensors. Features a built-in line fault isolator for use on Class A circuits. A detector must be installed for it to operate. The isolator base does not support the SIGA-LED Remote LED. Includes SIGA-TS4 Trim Skirt.
-
Product Description Edwards EST SIGA-IM Isolator Module (IM) is an addressable device that protects a signaling line circuit (SLC) from a to wire-to-wire short. The SIGA-IM module monitors line voltages and opens the data line when a short is detected, isolating the short between the two modules located electrically closest to the short. The loop controller assigns an address to the SIGA-IM module. The module uses one detector address on the SLC.
-
Product Description The Edwards EST SIGA-IO is an Input Output Module. The actual operation of the SIGA-IO and MIO is determined by the “personality code” selected by the installer, which is downloaded to the module from the loop controller during system configuration. Input/Output Modules are compatible with GE Security’s Signature Loop Controller operating under EST3 version 3.0 or higher, and QuickStart Signature Loop Intelligent Controller. Mounts to a standard North American one-gang electrical box, making it ideal for locations where only one module is required. Separate I/O and data loop connections are made to each module.
-
Product Description NOTE: This part is discontinued by the manufacturer. Replace with: SIGA-IPHS. The Edwards EST SIGA-IS is a plug-in Ionization Smoke Detector. COMPATIBLE BASES and ACCESSORIES: — SIGA-SB Detector Mounting Base - Standard — SIGA-SB4 4-inch Detector Mounting Base w/ SIGA-TS4 Trim Skirt — SIGA-RB Detector Mounting Base w/Relay — SIGA-RB4 4-inch Detector Mounting Base w/Relay w/ SIGA-TS4 Trim Skirt — SIGA-IB Detector Mounting Base w/Fault Isolator — SIGA-IB4 4-inch Detector Mounting Base w/ Fault Isolator and SIGA-TS4 Trim Skirt — SIGA-LED Remote Alarm LED. (Connects to the SIGA-SB or SIGA-SB4 Standard Base only.) — SIGA-AB4G Audible (Sounder) Base for Fire Detectors — SIGA-AB4GT Audible (Sounder) Base for CO and Fire Detectors — SIGA-TCDR Temporal Pattern Generator — SIGA-CRR Polarity Reversal Relay can be used for sounding to other audible bases on the same 24 Vdc circuit. — SIGA-TS4 Trim Skirt (supplied with 4-inch bases) — SIGA-DMP Detector Mounting Plate — SIGA-RTA Detector Removal Tool — SIGA-VA Detector Cleaning Tool
-
Product Description The Edwards EST model SIGA-LED Remote Alarm Indicator connects to the SIGA-SB or SIGA-SB4 Standard Base only. It features a North American single-gang plastic faceplate with a white finish and red alarm LED.
-
Product Description The Edwards EST SIGA-MAB is a Plug-in (UIO) Universal A/B Module. Plugs into UIO2R, UIO6R or UIO6 Motherboards. Uses Two Module Addresses. Module function is determined by the personality code selected by the installer. Features 14 programmable personality codes. For use exclusively with the Signature Loop Controller.
-
Product Description The Edwards EST SIGA-MCC1 is a Single Input Riser I/O Control Module intended for use with the Signature Loop Controller. See also SIGA-CC1 for equivalent product.
-
Product Description Edwards EST SIGA-MCC1S Synchronization Output Module
-
Product Description The Edwards EST SIGA-MCC2 is a Dual Input (Riser) Signal Module compatible for use with XLS100 and XLS1000 Loop Controllers.
-
Product Description The Edwards EST SIGA-MCR Control Relay Module is an addressable Signature Series component. A Form C dry contact relay in the SIGA-MCR may control equipment shutdown or external appliances like door closers, fans, and dampers. Edwards EST's SIGA-MCR plugs into any available module space on a SIGA-UIO(R) series motherboard, and captive screws secure it to the board. All wiring connections are made to terminals on the motherboard.
-
Product Description The Edwards EST SIGA-MCRR Polarity Reversal Relay Module is an addressable Signature Series component used to power and activate the audible sounder in Signature Audible Detector Bases. UIO Mount.
-
Product Description Edwards EST SIGA-MCT2 Dual Input Module is an intelligent analog addressable device used to connect one or two Class B normally-open Alarm, Supervisory, or Monitor type dry contact Initiating Device Circuits (IDC). Uses Two Module Addresses. Plugs into a SIGA-UIO2R / SIGA-UIO6R / SIGA-UIO6 Motherboard. EST's SIGA-MCT2 is part of the UIO family of plug-in Signature Series modules and is designed for use only with EST's Signature Loop Controller.
-
Product Description The Edwards EST SIGA-MDM Digital Message Module provides the ability to add custom prerecorded voice messaging to EST’s Network and Non-network systems. The SIGA-MDM provides storage for two 30 second messages in its non-volatile EEPROM memory. The Edwards EST SIGA-MDM is part of the UIO family of plug-in Signature Series modules. The SIGA-MDM Digital Message Module mounts to a UIO motherboard. Plug the module into any available position on the motherboard and secure the module to the motherboard with the captive screws. Wiring connections are made to the terminals on the motherboard.
-
Product Description Edwards EST SIGA-MFT (Map Fault Finder Tool) is a powerful diagnostic tool that pinpoints mapping issues on the Signature Series signaling line sircuit (SLC). The SIGA-MFT connects between the SLC and a laptop computer through a standard USB port and reports onscreen, via Windows 7 compatible software.
