-
Responds to stationary flames with no flicker Sensitive to low-frequency flickering IR radiation emitted by flames during combustion Compact flame detector which fits into Discovery Marine mounting bases Loop-powered False alarms due to factors such as flickering sunlight are avoided by a combination of filters and signal processing techniques -
Operation with control equipment using XP95 or Discovery protocol Quick and easy stainless steel 2 axis adjustable mounting bracket Ability to detect 0.1m2 flames at a distance of 25m as required by EN54 10
-
Key Features:; Over 20 fire detection modes Tyco MX FASTLOGIC Expert algorithms MX HPO detection Algorithms Up to 250 detectors per loop Remote detector verification & temperature read out Programmable alarm LED with 360o viewing angle Optional detector locking pin Variety of sounder and relay detector bases Address flag stays with the base Approved by all major classification societies for use on vessels Lower cost system design and installation as one detection type can be used throughout the vessel Lower cost of ownership as no radioactive source disposal costs together with less spares holding Enhanced safety in accommodation areas by using the unique Carbon Monoxide (CO) detectors Major Cable saving options using loop powered ancillaries Allows easier decision making by operator because of remote temperature and smoke density read-out
-
Resettable operating element Easy access, front reset mechanism Front facing accessible addressing for commissioning E-Z fit first fix terminals for installation (Indoor only) Ergonomic reset key and keyring hole Flashing Poling LED Option EN54-11 and EN54-17 certified (where an isolator is present) 170° viewable LED indicator
-
Flashing LED option to indicate polling (Discovery systems only) ‘Plug and Play’ terminal connections for fast wiring Continuity link for wiring test before commissioning Reports an alarm in under 0.2 seconds Resettable element
-
Flashing LED option to indicate polling (Discovery systems only) ‘Plug and Play’ terminal connections for fast wiring Continuity link for wiring test before commissioning Reports an alarm in under 0.2 seconds Resettable element
-
Brand Information:; Resettable operating element Easy access, front reset mechanism Front facing accessible addressing for commissioning Ergonomic reset key and keyring hole Flashing Poling LED Option 170° viewable LED indicator
-
‘Plug and Play’ terminal connections for fast wiring Continuity link for wiring test before commissioning Reports an alarm in under 0.2 seconds Resettable element
-
Approved for use in the marine environment Five response modes for environmental adaptation Day/night switching for increased flexibility Drift compensation for false alarm reduction User programmability for data XPERT card addressing for increased security
-
Resettable element for testing Easy access, front reset mechanism A unique, ergonomically designed Key for resetting and front cover removal
-
Approved to MED by GL SIL Level 2 approved variant available Ideal for use in oil and gas environments Fast response Integral short-circuit isolator Bi-coloured status LED Non-frangible element fitted as standard (conforms to EN54) Addressed with TCH-B200 Hand Held Programmer Surface or flush mounting (if surface mounting, requires SR MOUNTING BOX – sold separately) LPCB Approved to EN54
-
Key Features:; Fast response Integral short-circuit isolator Bi-coloured status LED Non-frangible element fitted as standard (conforms to EN54) Addressed with TCH-B200 Hand Held Programmer Surface mounted IP67 rated LPCB approved to EN54 GL and MED Type approval
-
-
Communication and control interface to MZX Technology Fire Controllers Approved to EN54-13 ensuring system compatibility Integrated short-circuit isolator removes the need of installing a separate short-circuit isolator Reduced installation costs Meets the requirements of EN54 Pt. 11 and EN54 Pt. 17. Marine Approved
-
Communication and control interface to MZX-Technology Fire Controllers Approved to EN54-13 ensuring system compatibility Integrated short-circuit isolator removes the need of installing a separate short-circuit isolator Reduced installation costs Meets the requirements of EN54 Pt. 11 and EN54 Pt. 17. IP67 rating for outdoor installations Marine Approved
-
Application:; It is possible to set individual control of the sounder and visual indicator Volume and tone settings can be selected from the control panel Electronic bell tone IMO 1A tone included
-
Operation:; Choice of tones on standard device: Apollo, Slow Whoop and DIN IP66 rated Synchronisation of tones Individual and group addressing Non-isolated Output 100dB(A)
-
Operation:; Choice of tones on standard device: Apollo, Slow Whoop and DIN IP66 rated Synchronisation of tones Individual and group addressing Non-isolated Output 100dB(A)
-
Key Features:; 12 zonal fire and fault indications Activate controls via keyswitch or code entry 1.25 Amp switch mode power supply Nom 27V DC Class change I/P Alert I/P 6 programmable switched -ve outputs Test mode, with or without sounders Disable zones, sounder O/Ps, aux O/Ps & delays
-
Essento Marine Overview:; 2 or 4 zones Activate controls via keyswitch or code entry Compatible with Apollo Orbis Marine detectors Integral detector removal monitoring Earth fault monitoring 1.25 Amp switch mode power supply Nom 27V DC 2 monitored sounder outputs 2 Aux C/O relays (1 x Fire) (1 x Fault). voltage free Class change I/P Alert I/P Fire & fault switched -ve outputs False alarm mode Muster alarm feature Test mode, with or without sounders Disable zones, sounder O/Ps & aux O/Ps Alarm load, 800mA shared between all sounder outputs All sounder circuits are fused @ 500mA with resettable fuses.
-
Essento Marine Overview:; 2 or 4 zones Activate controls via keyswitch or code entry Compatible with Apollo Orbis Marine detectors Integral detector removal monitoring Earth fault monitoring 1.25 Amp switch mode power supply Nom 27V DC 2 monitored sounder outputs 2 Aux C/O relays (1 x Fire) (1 x Fault). voltage free Class change I/P Alert I/P Fire & fault switched -ve outputs False alarm mode Muster alarm feature Test mode, with or without sounders Disable zones, sounder O/Ps & aux O/Ps Alarm load, 800mA shared between all sounder outputs All sounder circuits are fused @ 500mA with resettable fuses.
-
Essento Marine Overview:; 8 - 12 zones Activate controls via keyswitch or code entry Compatible with Apollo Orbis Marine detectors Integral detector removal monitoring Earth fault monitoring 3 Amp switch mode power supply Nom 27V DC 4 monitored sounder outputs 2 Aux C/O relays (1 x Fire) (1 x Fault). voltage free Class change I/P Alert (pulsing) I/P Fire & fault switched -ve outputs Program delays to ouputs False alarm modes A, B & C Muster alarm Test mode, with or without sounders Disable zones, sounder O/Ps, aux O/Ps & delays Alarm load, 2.4A shared between all sounder outputs All sounder circuits are fused @ 500mA with resettable fuses.
-
Essento Marine Overview:; 8 - 12 zones Activate controls via keyswitch or code entry Compatible with Apollo Orbis Marine detectors Integral detector removal monitoring Earth fault monitoring 3 Amp switch mode power supply Nom 27V DC 4 monitored sounder outputs 2 Aux C/O relays (1 x Fire) (1 x Fault). voltage free Class change I/P Alert (pulsing) I/P Fire & fault switched -ve outputs Program delays to ouputs False alarm modes A, B & C Muster alarm Test mode, with or without sounders Disable zones, sounder O/Ps, aux O/Ps & delays Alarm load, 2.4A shared between all sounder outputs All sounder circuits are fused @ 500mA with resettable fuses.
-
Features:; Reduced installation costs due to easier termination, polarity independent wiring and use of common base for all detector types Lower cost of ownership as no radioactive source disposal costs together with less spares holding Easier system design with full range of detector types including intrinsically safe models Higher safety in accommodation areas by using the unique Carbon Monoxide (CO) detection IP55 rated 60oC and 90oC fixed temperature heat detector
