-
Product Description Edwards EST GSA-CR Vigilant Control Relay Module provides one Form “C” dry relay contact can be used to control external appliances such as door closers, fans, dampers etc. Part of the Signature Series (SIGA) system components. -
Product Description Edwards EST GSA-CT1 Vigilant Single Input Module mounts to standard North American 1-gang electrical boxe. Separate I/O and data loop connections are made to each module. For use with the Signature Loop Controller.
-
Product Description The Edwards EST GSA-HFS Plug-in Intelligent Fixed Temp (135F) Heat Detector is designed for use with the Signature Loop Controller. COMPATIBLE BASES and ACCESSORIES: — GSA-SB Detector Mounting Base — GSA-SB4 4-inch Detector Mounting Base c/w GSA-TS Trim Skirt — GSA-RB Detector Mounting Base w/Relay — GSA-RB4 4-inch Detector Mounting Base /w Relay c/w GSA-TS Trim Skirt — GSA-IB Detector Mounting Base w/Fault Isolator — GSA-IB4 4-inch Detector Mounting Base w/ Fault Isolator c/w GSA-TS Trim Skirt — GSA-LED Remote Alarm LED — GSA-AB4G Audible (Sounder) Base — GSA-TS4 Trim Skirt (supplied with 4-inch bases)
-
Product Description Edwards EST GSA-M27 Vigilant is a Double Action (Single Stage) Fire Alarm Manual Pull Station. Compatible for use with Vigilant's Signature Loop Controller.
-
Product Description Edwards EST GSA-MCC1S Single Input Signal Module
-
Product Description The Edwards EST GSA-MM1 is a Monitor Module for use only with Vigilant’s Signature Loop Controller. Assigned to one circuit. Configures circuit 1 for Class B normally-open dry contact monitoring input such as from Fans, Dampers, Doors, etc. An ACTIVE signal is sent to the loop controller when the input contact is closed. The active condition is not latched at the module.
-
Product Description The Edwards EST GSA-MP1 is a Signature Module Mounting Plate, 1 footprint.
-
Product Description Edwards EST GSA-PHS 3D Multisensor (Heat / Smoke) Detector
-
Product Description The Edwards EST Vigilant GSA-PS is a plug-in Intelligent Photoelectric Smoke Detector for use with the Signature Series Controller. COMPATIBLE BASES and ACCESSORIES: — SIGA-SB Detector Mounting Base - Standard — SIGA-SB4 4-inch Detector Mounting Base w/ SIGA-TS4 Trim Skirt — SIGA-RB Detector Mounting Base w/Relay — SIGA-RB4 4-inch Detector Mounting Base w/Relay w/ SIGA-TS4 Trim Skirt — SIGA-IB Detector Mounting Base w/Fault Isolator — SIGA-IB4 4-inch Detector Mounting Base w/ Fault Isolator and SIGA-TS4 Trim Skirt — SIGA-LED Remote Alarm LED. (Connects to the SIGA-SB or SIGA-SB4 Standard Base only.) — SIGA-AB4G Audible (Sounder) Base for Fire Detectors — SIGA-AB4GT Audible (Sounder) Base for CO and Fire Detectors — SIGA-TCDR Temporal Pattern Generator — SIGA-CRR Polarity Reversal Relay can be used for sounding to other audible bases on the same 24 Vdc circuit. — SIGA-TS4 Trim Skirt (supplied with 4-inch bases) — SIGA-DMP Detector Mounting Plate — SIGA-RTA Detector Removal Tool — SIGA-VA Detector Cleaning Tool
-
Product Description The Edwards GSA-SD SuperDuct Intelligent Photoelectric Smoke Sensor features electronic addressing and issues a dirty sensor warning when it reaches its preset limit. Part of the "Signature Series," for use with GE's Signature Loop Controller. Mounts to standard 1-gang box, or standard 4-in square box, 1-1/2 inches deep, with 1-gangcover.
-
Product Description Edwards EST GSA-RM1 Riser Monitor Module
-
-
-
-
-
Product Description The Edwards EST IO64GD Intelligent Fire Alarm Control Panel is a 1 Loop System, 64 point capacity, 2 Class B NACs, 2 Line Dialer, gray door, surface mount enclosure, 115 VAC, English interface. This panel features the Signature Loop controller, compatible for use with SIGA-xx detectors and addressable modules. COMPATIBLE EXPANSION CARDS: — SA-232 Serial Port (RS-232), for connection to printers & computers — SA-ETH Ethernet Port, Slave — SA-CLA Class A adapter module. Provides Class A capacity on NACs — D16L-iO-1 LED Annunciator module, 16 X 2-LED zones (4 max programmable for sup) — D8RY-iO-1 (Note 1) LED Annunciator module, 16 X 2-LED zones (4 alarm only, 8 supervisory only, 4 alarm or supervisory) PROGRAMMING TOOLS: — iO-CU EST Series configuration and diagnostics utility — 260097 RS232 cable, 4 conductor, DB9 PC interface
-
-
Product Description Edwards IOP3A RS-232 Optical Isolator Card
-
Product Description This is the replacement board for an Edwards EST LSS4 Fire Alarm Control Panel. Supports an optional PC based configuration program. Does not include power supply.
-
Product Description The Edwards EST M500MF(B) is an intelligent Control Monitor Module.
-
Product Description Edwards EST M500RF Addressable Relay Control Module is intended for use with intelligent 2-wire systems. Mounts directly to 4-inch square electrical boxes. The module can also mount to the DNR Duct Detector Housing. COMPATIBLE ACCESSORIES: — SMB500 Surface Mount Electrical Box — CB500 Module Barrier
-
Product Description Edwards EST M500SF Supervised Control Module
-
Product Description The Edwards EST M500XF is an Addressable Fault Isolator Module is compatible for use with EST3 Systems.
-
Product Description NOTE: This part is discontinued by the manufacturer. Edwards EST M501MF Intelligent Addressable Mini Monitor Module provides an address for a group of Normally Open (N.O.) initiating devices. The small size of the M501MF allows it to fit inside devices or junction boxes behind devices.
