-
-
Product Description Edwards EST GCF-S7 Genesis Ceiling Speaker is an audible fire alarm notification appliance designed for indoor ceilings and walls. White, with FIRE marking. Operating voltage: 70 Vrms Mounts to standard 4 inch square electrical box, 2-1/8 in deep.
-
Product Description The Edwards EST GCF-S7VMH is a white Genesis Speaker Strobe for ceiling mounting. Strobe operating voltage 16 to 33 VDC (24 VDC nominal) or 16 to 33 VFWR (24 VFWR nominal) Strobe output: 95, 115, 150, 177 candelas Speaker voltage 70 V (Selectable ¼, ½, 1, or 2 watt)
-
Product Description Edwards' EST GCF-VM is a 15 to 95 multi-cd Strobe, white with FIRE marking for wall or ceiling mounting.
-
Product Description Edwards EST GCFR-HDVM Multi-CD Horn Strobe for ceiling mounting, 24VDC
-
-
Product Description Edwards EST GCHFWF-S2VMC is a Genesis High Fidelity Ceiling Speaker-strobe, white, fire marking, 25V, visual multi-candela, clear lens.
-
Product Description The Edwards EST GCHFWF-S7VMC Speaker Strobe is a Genesis High Fidelity Speaker-strobe, white, fire marking, 70V, visual multi-candela, clear lens, for ceiling mounting. Speaker operating voltage 25 Vrms or 70 Vrms Strobe operating voltage 16 to 33 VDC Speaker response 400 to 4,000 Hz Flush mount to North American 4-inch square electrical box, 2-1/8 (54 mm) inches deep, or 960A-4RF round flush box. No extension ring required. Suitable for indoor wall or ceiling applications NOTE: Replaces GCF-S7VM
-
-
-
Product Description Edwards EST GCWN-VMA Field Configurable Ceiling Strobe (white) is part of the Genesis Series. Operating Voltage: Regulated 16 to 33 VDC Mounts Flush to North-American 4” square box, at least 1½” (38 mm) deep. Surface mount using model G4EWB (white) surface mount box. Compatible Synchronization Sources: SIGA-CC1S, SIGA-MCC1S, SIGA-CC2A, SIGA-MCC2A, G1M-RM, BPS6A, BPS10A, APS6A, APS10A, iO64, iO500, Fireshield Plus 3, 5 and 10 zone.
-
Product Description Edwards EST GCWN-VMC Speaker Strobe (White) is a GC Ceiling, Standard Range Strobe, No Markings, Clear Lens Strobe operating voltage 16 to 33 VDC (24 VDC nominal) or 16 to 33 VFWR (24 VFWR nominal) Speaker Operating Voltage 25 Vrms or 70 Vrms Speaker response 300 to 8,000 Hz Synchronization Sources: SIGA-CC1S, SIGA-MCC1S, SIGA-CC2A, SIGA-MCC2A, G1M-RM, BPS6A, BPS10A, APS6A, APS10A, iO Series, Fireshield Plus 3, 5 and 10 zone.
-
Product Description The Edwards EST GSA-AB4 is a plug-in Audible Detector Base.
-
Product Description Edwards EST GSA-CR Vigilant Control Relay Module provides one Form “C” dry relay contact can be used to control external appliances such as door closers, fans, dampers etc. Part of the Signature Series (SIGA) system components.
-
Product Description Edwards EST GSA-CT1 Vigilant Single Input Module mounts to standard North American 1-gang electrical boxe. Separate I/O and data loop connections are made to each module. For use with the Signature Loop Controller.
-
Product Description The Edwards EST GSA-HFS Plug-in Intelligent Fixed Temp (135F) Heat Detector is designed for use with the Signature Loop Controller. COMPATIBLE BASES and ACCESSORIES: — GSA-SB Detector Mounting Base — GSA-SB4 4-inch Detector Mounting Base c/w GSA-TS Trim Skirt — GSA-RB Detector Mounting Base w/Relay — GSA-RB4 4-inch Detector Mounting Base /w Relay c/w GSA-TS Trim Skirt — GSA-IB Detector Mounting Base w/Fault Isolator — GSA-IB4 4-inch Detector Mounting Base w/ Fault Isolator c/w GSA-TS Trim Skirt — GSA-LED Remote Alarm LED — GSA-AB4G Audible (Sounder) Base — GSA-TS4 Trim Skirt (supplied with 4-inch bases)
-
Product Description Edwards EST GSA-M27 Vigilant is a Double Action (Single Stage) Fire Alarm Manual Pull Station. Compatible for use with Vigilant's Signature Loop Controller.
-
Product Description Edwards EST GSA-MCC1S Single Input Signal Module
-
Product Description The Edwards EST GSA-MM1 is a Monitor Module for use only with Vigilant’s Signature Loop Controller. Assigned to one circuit. Configures circuit 1 for Class B normally-open dry contact monitoring input such as from Fans, Dampers, Doors, etc. An ACTIVE signal is sent to the loop controller when the input contact is closed. The active condition is not latched at the module.
-
Product Description The Edwards EST GSA-MP1 is a Signature Module Mounting Plate, 1 footprint.
-
Product Description Edwards EST GSA-PHS 3D Multisensor (Heat / Smoke) Detector
-
Product Description The Edwards EST Vigilant GSA-PS is a plug-in Intelligent Photoelectric Smoke Detector for use with the Signature Series Controller. COMPATIBLE BASES and ACCESSORIES: — SIGA-SB Detector Mounting Base - Standard — SIGA-SB4 4-inch Detector Mounting Base w/ SIGA-TS4 Trim Skirt — SIGA-RB Detector Mounting Base w/Relay — SIGA-RB4 4-inch Detector Mounting Base w/Relay w/ SIGA-TS4 Trim Skirt — SIGA-IB Detector Mounting Base w/Fault Isolator — SIGA-IB4 4-inch Detector Mounting Base w/ Fault Isolator and SIGA-TS4 Trim Skirt — SIGA-LED Remote Alarm LED. (Connects to the SIGA-SB or SIGA-SB4 Standard Base only.) — SIGA-AB4G Audible (Sounder) Base for Fire Detectors — SIGA-AB4GT Audible (Sounder) Base for CO and Fire Detectors — SIGA-TCDR Temporal Pattern Generator — SIGA-CRR Polarity Reversal Relay can be used for sounding to other audible bases on the same 24 Vdc circuit. — SIGA-TS4 Trim Skirt (supplied with 4-inch bases) — SIGA-DMP Detector Mounting Plate — SIGA-RTA Detector Removal Tool — SIGA-VA Detector Cleaning Tool
-
Product Description Edwards EST GSA-RM1 Riser Monitor Module
-
Product Description The Edwards GSA-SD SuperDuct Intelligent Photoelectric Smoke Sensor features electronic addressing and issues a dirty sensor warning when it reaches its preset limit. Part of the "Signature Series," for use with GE's Signature Loop Controller. Mounts to standard 1-gang box, or standard 4-in square box, 1-1/2 inches deep, with 1-gangcover.
