-
High immunity to false alarm Ultra-fast detection mode detection within 5 milliseconds for fireballs or explosions Hydrogen and Hydrocarbons flame detection High sensitivity -up to 100 ft. (30m) for a 1 ft2 (0.1m2) n-heptane pan fire HD video output with Automatic HD video recording of fire events. Data/ Event logger: Alarms, faults and other relevant events are logged to non-volatile memory Ethernet communication -in addition to the standard methods, such as 4-20mA and Modbus Built-in-Test (BIT) -Automatic and manual internal self-test of window cleanliness and the overall operation of the detector (for both IR and UV channels) Window heater to avoid condensation and icing Tilt mounting bracket can be connected either above or below the detector; UV-IR-HD: Hydrogen and hydrocarbons flame detection. Spectrum response of IR radiation in the 3.0-4.0-micron range. UV-IR-F-HD: Hydrocarbon flame detection. Spectrum response of IR radiation in the 4.0-5.0-micron range; F-Guard UV-IR-F-HD - Data Sheet F-Guard UV-IR-F-HD - Operators Manual -
High immunity to false alarm Ultra-fast detection mode detection within 5 milliseconds for fireballs or explosions Hydrogen and Hydrocarbons flame detection High sensitivity -up to 100 ft. (30m) for a 1 ft2 (0.1m2) n-heptane pan fire HD video output with Automatic HD video recording of fire events. Data/ Event logger: Alarms, faults and other relevant events are logged to non-volatile memory Ethernet communication -in addition to the standard methods, such as 4-20mA and Modbus Built-in-Test (BIT) -Automatic and manual internal self-test of window cleanliness and the overall operation of the detector (for both IR and UV channels) Window heater to avoid condensation and icing Tilt mounting bracket can be connected either above or below the detector; UV-IR-HD: Hydrogen and hydrocarbons flame detection. Spectrum response of IR radiation in the 3.0-4.0-micron range. UV-IR-F-HD: Hydrocarbon flame detection. Spectrum response of IR radiation in the 4.0-5.0-micron range; F-Guard UV-IR-HD - Data Sheet F-Guard UV-IR-HD - Operators Manual
-
Xenex deploys devices on conventional radial wiring layouts using standard 2-core cable Device options include a full range of smoke detectors (optical, beam and duct types), heat detectors (fixed Temperature or rate of rise types), sounders, strobes and bells Sounder options include shallow base, deep base and bedhead sounder types For installations where a high degree of weather proofing is required, IP55 rated sounders, sirens and bells are available Common accessories such as manual call points (standard IP54 rated or key operated anti-vandal types, available as either surface mounted or flush-fitted models), door release units and Xenon flashers can all be accommodated Spare test keys (for testing manual call points without breaking the glass), spare glasses (packs of 10) and False alarm verification feature to filter out false alarms is selectable through software
-
Key Features:; Max Quantity per Loop – 100 Approx Weight – 0.34kg Operating Temperature – minus 10C to +50C Ingress Protection – IP40 Device Load Factor – 1
-
-
-
-
-
Very low power consumption means more sounders per loop e.g. 200 system sounders per loop compared to 40 The strobe option is equivalent to a standard 3w xenon strobe and uses 1/20th of the power The strobe element of the sounders is fully monitored for circuit failures The sounder tones are programmed in exactly the same way as the existing Vigilon sounders Loop powered voice enhanced sounders are available in the range 4 voice phrases and a bell sound are available as standard By using the bell sound in the voice sounder it is possible to have a loop powered bell The sound producing element in the voice sounders is monitored every hour using a VLF tone Voice and Tone mode can be freely mixed within the same sounder All messages and strobe signals are synchronised across loops in the same control panel Complements the S-Quad sensor with voice messages and complex sound signals A backwards compatible version of the system sounder is available for replacement or expansion to existing systems, avoiding the need to upgrade panel software The HandiLink remote control makes it much easier to adjust the sounders in situ Products incorporate innovative design features for which multiple patents are pending High intensity flashing strobe conforms to the Disability Discrimination Act (DDA) 1995 legislation
-
Very low power consumption means more sounders per loop e.g. 200 system sounders per loop compared to 40 The strobe option is equivalent to a standard 3w xenon strobe and uses 1/20th of the power The strobe element of the sounders is fully monitored for circuit failures The sounder tones are programmed in exactly the same way as the existing Vigilon sounders Loop powered voice enhanced sounders are available in the range 4 voice phrases and a bell sound are available as standard By using the bell sound in the voice sounder it is possible to have a loop powered bell The sound producing element in the voice sounders is monitored every hour using a VLF tone Voice and Tone mode can be freely mixed within the same sounder All messages and strobe signals are synchronised across loops in the same control panel Complements the S-Quad sensor with voice messages and complex sound signals A backwards compatible version of the system sounder is available for replacement or expansion to existing systems, avoiding the need to upgrade panel software The HandiLink remote control makes it much easier to adjust the sounders in situ Products incorporate innovative design features for which multiple patents are pending High intensity flashing strobe conforms to the Disability Discrimination Act (DDA) 1995 legislation
-
-
