-
-
Key Features:; 8 amp double pole relay Suitable for mains switching Individually fused outputs on fused version Red LED to indicate relay activated
-
-
Key Features:; 8 amp double pole relay Suitable for mains switching Individually fused outputs on fused version Red LED to indicate relay activated
-
Coils are polarised and suppressed Fused and un-fused versions available 8 amp relays suitable for switching mains
-
Key Features:; Allows the connection of up to eight CFP760 Repeaters (one CFP761 required per Main, all CFP760 repeaters include a CFP761 as standard) Communicates over screened two-wire fire resistant cable Total repeater network cable length should not exceed 1KM
-
Coils are polarised and suppressed Fused and un-fused versions available 8 amp relays suitable for switching mains
-
Features; Two wire serial connection Up to 7 sounder boards per system 230V AC or 24V DC powered versions Zoned, 2-stage or common alarm All outputs monitored for open and short circuit faults Individual open and short circuit fault indicators Fully monitored by main control panel Class change input facility Up to 8 outputs with 0.5A available from each Can be connected to serial bus with Ancillary boards and repeaters Boxed units in enclosure to match Sigma CP control panels Power fault input for monitoring remote power supplies
-
Key Features:; Provides four panel-controlled volt free relay outputs (reset, fault, aux. fire and remote). PCB mounts inside the CFP fire panel. Reset relay is active during the panel’s reset cycle. Fault relay is active in any fault condition. This relay is failsafe and normally energised - if power is removed from the panel the relay will changeover to produce a fault signal. Aux. fire relay is active in an alarm condition provided all relevant delays have expired. Remote relay is active during any Alarm Condition provided all relevant delays have expired. Outputs are NOT designed to switch mains voltages.
-
Key Features:; 8A double pole volt free changeover relay Contacts rated at up to 250vac 24vdc coils, polarised and suppressed ‘Activated’ LED indicator Nylon self-adhesive mounting pillars; All relays polarised and suppressed 24v coils Self-adhesive mounting pillars Relay activated LED indication Fused and un-fused versions
-
Key Features:; 8 amp relay Suitable for mains switching Suppressed and polarised relay 24v coil Red or white box Surface or flush fitting LED ‘isolated’ indication (yellow) Double pole relay Isolate key switch Selectable internal buzzer on isolation Option switch to energise relay on isolation
-
Key Features:; Provides four panel-controlled volt free relay outputs (reset, fault, aux. fire and remote) and eight output per zone relays. PCB mounts inside the CFP fire panel. Reset relay is active during the panel’s reset cycle. Fault relay is active in any fault condition. This relay is failsafe and normally energised - if power is removed from the panel the relay will changeover to produce a fault signal. Aux. fire relay is active in an alarm condition provided all relevant delays have expired. Remote relay is active during any Alarm Condition provided all relevant delays have expired. Output per zone relays will changeover when the corresponding zone is in alarm (subject to certain conditions - for full details refer to the instructions, downloadable below). Outputs are NOT designed to switch mains voltages.
