-
Product Description Edwards EST SIGA-IM Isolator Module (IM) is an addressable device that protects a signaling line circuit (SLC) from a to wire-to-wire short. The SIGA-IM module monitors line voltages and opens the data line when a short is detected, isolating the short between the two modules located electrically closest to the short. The loop controller assigns an address to the SIGA-IM module. The module uses one detector address on the SLC. -
Product Description Edwards EST SIGA-IB4 4-inch Isolator Detector Base is intended for use with Signature Series Sensors. Features a built-in line fault isolator for use on Class A circuits. A detector must be installed for it to operate. The isolator base does not support the SIGA-LED Remote LED. Includes SIGA-TS4 Trim Skirt.
-
Product Description Edwards EST SIGA-IB Isolator Detector Base is intended for use with Signature Series Sensors. Includes a built-in line fault isolator for use on Class A circuits. A detector must be installed for it to operate. The isolator base does not support the SIGA-LED Remote LED.
-
Product Description NOTE: This part is discontinued by the manufacturer. Replace with: SIGA-HRD The Edwards EST SIGA-HRS Heat Detector is a combination 15°F per minute Rate-of-Rise, and 135°F (57°C) Fixed-Temperature Heat Detector. Edwards EST SIGA-HRS detectors are compatible only with Signature Loop Controller. COMPATIBLE BASES and ACCESSORIES: — SIGA-SB Detector Mounting Base - Standard — SIGA-SB4 4-inch Detector Mounting Base w/ SIGA-TS4 Trim Skirt — SIGA-RB Detector Mounting Base w/Relay — SIGA-RB4 4-inch Detector Mounting Base w/Relay w/ SIGA-TS4 Trim Skirt — SIGA-IB Detector Mounting Base w/Fault Isolator — SIGA-IB4 4-inch Detector Mounting Base w/ Fault Isolator and SIGA-TS4 Trim Skirt — SIGA-LED Remote Alarm LED. (Connects to the SIGA-SB or SIGA-SB4 Standard Base only.) — SIGA-AB4G Audible (Sounder) Base for Fire Detectors — SIGA-AB4GT Audible (Sounder) Base for CO and Fire Detectors — SIGA-TCDR Temporal Pattern Generator — SIGA-CRR Polarity Reversal Relay can be used for sounding to other audible bases on the same 24 Vdc circuit. — SIGA-TS4 Trim Skirt (supplied with 4-inch bases) — SIGA-DMP Detector Mounting Plate — SIGA-RTA Detector Removal Tool — SIGA-VA Detector Cleaning Tool NOTE: This part replaces SIGA2-HRS and SIGA-HRD.
-
Product Description Edwards EST SIGA-HRD Fixed Temp / RoR Heat Detector is designed for use with the Signature Loop Controller. COMPATIBLE BASES and ACCESSORIES: — SIGA-SB Detector Mounting Base - Standard — SIGA-SB4 4-inch Detector Mounting Base w/ SIGA-TS4 Trim Skirt — SIGA-RB Detector Mounting Base w/Relay — SIGA-RB4 4-inch Detector Mounting Base w/Relay w/ SIGA-TS4 Trim Skirt — SIGA-IB Detector Mounting Base w/Fault Isolator — SIGA-IB4 4-inch Detector Mounting Base w/ Fault Isolator and SIGA-TS4 Trim Skirt — SIGA-LED Remote Alarm LED. (Connects to the SIGA-SB or SIGA-SB4 Standard Base only.) — SIGA-AB4G Audible (Sounder) Base for Fire Detectors — SIGA-AB4GT Audible (Sounder) Base for CO and Fire Detectors — SIGA-TCDR Temporal Pattern Generator — SIGA-CRR Polarity Reversal Relay can be used for sounding to other audible bases on the same 24 Vdc circuit. — SIGA-TS4 Trim Skirt (supplied with 4-inch bases) — SIGA-DMP Detector Mounting Plate — SIGA-RTA Detector Removal Tool — SIGA-VA Detector Cleaning Tool NOTE: Replaces SIGA-HFS & SIGA-HRS
-
Product Description NOTE: This part is discontinued by the manufacturer. Replace with: SIGA-HFD Edwards EST SIGA-HFS Fixed Temp Heat Detector is an intelligent addressable device featuring a microprocessor which minimizes false alarms. Compatible only for use with Edwards EST Security’s Signature Loop Controller. COMPATIBLE BASES and ACCESSORIES: — SIGA-SB Detector Mounting Base - Standard — SIGA-SB4 4-inch Detector Mounting Base w/ SIGA-TS4 Trim Skirt — SIGA-RB Detector Mounting Base w/Relay — SIGA-RB4 4-inch Detector Mounting Base w/Relay w/ SIGA-TS4 Trim Skirt — SIGA-IB Detector Mounting Base w/Fault Isolator — SIGA-IB4 4-inch Detector Mounting Base w/ Fault Isolator and SIGA-TS4 Trim Skirt — SIGA-LED Remote Alarm LED. (Connects to the SIGA-SB or SIGA-SB4 Standard Base only.) — SIGA-AB4G Audible (Sounder) Base for Fire Detectors — SIGA-AB4GT Audible (Sounder) Base for CO and Fire Detectors — SIGA-TCDR Temporal Pattern Generator — SIGA-CRR Polarity Reversal Relay can be used for sounding to other audible bases on the same 24 Vdc circuit. — SIGA-TS4 Trim Skirt (supplied with 4-inch bases) — SIGA-DMP Detector Mounting Plate — SIGA-RTA Detector Removal Tool — SIGA-VA Detector Cleaning Tool
-
Product Description The Edwards EST SIGA-HFD Intelligent Fixed Temp Heat Detector is designed for use with the Signature Loop Controller. COMPATIBLE BASES and ACCESSORIES: — SIGA-SB Detector Mounting Base - Standard — SIGA-SB4 4-inch Detector Mounting Base w/ SIGA-TS4 Trim Skirt — SIGA-RB Detector Mounting Base w/Relay — SIGA-RB4 4-inch Detector Mounting Base w/Relay w/ SIGA-TS4 Trim Skirt — SIGA-IB Detector Mounting Base w/Fault Isolator — SIGA-IB4 4-inch Detector Mounting Base w/ Fault Isolator and SIGA-TS4 Trim Skirt — SIGA-LED Remote Alarm LED. (Connects to the SIGA-SB or SIGA-SB4 Standard Base only.) — SIGA-AB4G Audible (Sounder) Base for Fire Detectors — SIGA-AB4GT Audible (Sounder) Base for CO and Fire Detectors — SIGA-TCDR Temporal Pattern Generator — SIGA-CRR Polarity Reversal Relay can be used for sounding to other audible bases on the same 24 Vdc circuit. — SIGA-TS4 Trim Skirt (supplied with 4-inch bases) — SIGA-DMP Detector Mounting Plate — SIGA-RTA Detector Removal Tool — SIGA-VA Detector Cleaning Tool
-
Product Description The Edwards EST SIGA-HDT Signature Handheld Diagnostic Tool is designed to help users locate and resolve issues during installation or on an existing system. The tool can be used to initialize a Signature loop before connecting to a control panel or it can be used for diagnosis of an existing loop. The SIGA-HDT is shipped with the Signature Diagnostic Tool Software (p/n 7350894) which is compatible with Windows 7 and 10 Operating systems.
-
Product Description The SIGA-DTS Duct Test Station uses a key switch along with an integral intelligent input module mounted on a two-gang plastic plate. It is supplied with two keys and features a red alarm LED. When the key is turned to the “TEST” position, the LED lights and the integral module remotely inputs a duct detector test alarm. The Duct Test Station mounts to standard 2-inch deep North American two-gang and 4-inch square electrical boxes and European 100 mm square boxes.
-
Product Description The Edwards EST SIGA-DH Duct Detector Housing is specially designed exploit all the capabilities of Signature Series intelligent photoelectric and multisensor smoke detectors. Five one-gang knockouts on the 16 gauge steel housing provide a location for mounting intelligent Signature Series modules. The Edwards EST SIGA-DH Duct Housing comes with a 6 inch (150 mm) exhaust tube. Air sampling tubes are available in lengths from 8 inches (200 mm) to 10 feet (3048 mm) and must be ordered separately.
-
Product Description Edwards EST SIGA-DG Detector Guard
-
Product Description The Edwards EST SIGA-CT2 Dual Input Module is an intelligent analog addressable device used to connect one or two Class B normally-open Alarm, Supervisory, or Monitor type dry contact Initiating Device Circuits (IDC). For use exclusively with Edwards / EST’s Signature Loop Controller.
