-
Features:; Low Cost Clear Easy to fit and Replace Retro Fit -
Technical Specifications
Model: Top Light
Features:
- Lamp - Halogen 55w
- Color/Body - Black/3mm thick ABS
- Dimension (Approx) - 25cmL, 16.5 cm front dia & 13.5cm rear dia
- Weight (Approx) - 3.7 Kg
- Light Range (Approx) - 1 km / 1094 Yards
- Battery - SMF 12V7Ah
- Battery Charger - Inbuilt
- Charging - Input Voltage 220+ 10%AC single phase 50 cycle
- Solar Charging - optionally available
- Operation Modes - Continuous flasher, dimmer and timer mode
- Operation Time (continuous mode on full charge) - 60 Min ( + 10 Min)
- Dimmer - YES
- Flasher - Auto (time variable)
- Membrane Switches - YES
- Charging Time (Approx) - 10h
- Handle is integral part of the body - YES
- Water Resistant - YES
- Charging Indicator - YES
- Adjustable Shoulder Strap - YES
- Toughened Glass - Optional
- Sound Signal for Extreme high/low/dimmer & auto-flasher level - YES
- Restarts at same dimmer level at which it was last put off - YES
- Master Push to ON Switch - Yes
- Low Battery Indicator - YES
- AC/DC blown fuse indicator - YES
- Auto Emergency light ON function; in case of power failure when in charging mode - YES
-
The PX-1 is a stand-alone smoke alarm complying with EN 14604, equipped with a built-in long-term lithium battery. Our devices therefore do not require annoying and expensive battery changes. This represents just one of the many ways how we actively contribute to the protection of our environment.
- CE label according to DIN EN 14604, ROHS, German TÜV.
- Made In Germany
- 12 years of battery life (lithium).
- Bi-sensor processor technology (smoke + heat).
- Certified magnetic carrier system with special adhesive gel pad.
- Maximum false alarm protection.
- Kitchen suitable (Condensation Barriers).
- Insect Shield.
- Alarm signal > 85 dB.
- 60 m² detection range
- Large, easy to use testing/stop button (78 cm²)
- No battery change necessary
- Processor technology / intelligent software analysis of sensor readings
- Cyclical genuine self-test function
- Help signal (e.g. low battery status or contamination)
-
One Minute Auto-Alignment – The Fireray One’s one-minute auto-alignment feature not only saves time during installation, the quality of alignment is also guaranteed by the automation protocol. Using the Fireray One, a high level of protection is always achieved. One standalone product – The Fireray One is a standalone reflective beam detector that requires no specialist tools or prior knowledge or training to get it up and working. One personal installation – All of the internal and external features of the Fireray One ensure that anyone can align the beam detector perfectly, because the experience and expert knowledge of beam detection has been engineered into the product! Movement Tracker – The Fireray One contains Building Movement Tracking that maintains its own alignment once installed. Its optics are fully enclosed in an IP-rated casing with a flat surface for easy cleaning without affecting alignment. An integrated user-interface at the front of the product allows realignment and programming without having to dismount the detector.
-
-
-
-
CO generated by Testifire is delivered via capsules. Key features include:
- Non-pressurised – easier to store
- On-demand CO generation
- Non-flammable
- Safe – amount of CO produced pose no health risk
- Product Code: TC3-001
-
Our ultimate detector tester, Testifire is available as a 3-in-1 tester to functionally test smoke, heat, and CO. CO testing is carried out using a Testifire head unit and a TC3 capsule, safe levels of CO are generated via the capsule once the tester is placed over the detector. Testifire is compatible with the Solo access poles and offers a number of unique benefits. Testifire 2001 - 001 Smoke, Heat and CO Detector Testing Kit Includes:
- 1 x Testifire 2000-001 Head Unit
- 1 x TS3-001 Smoke Capsule
- 1 x TC3-001 CO Capsule
- 2 x Solo 770-001 Battery Baton
- 1 x Solo 727-001 Multi-Voltage Fast Charger
-
Designed for fire safety professionals in mind, the Testifire 9201 detector kit contains all the equipment you need for functional testing of smoke, heat and CO detectors of heights up to 9 meters. Kit includes:
- Testifire 2001
- Solo 200 Detector Removal Tool
- Solo 610 Storage bag
- Solo 100 Access Pole
- 3 x Solo 101 Extension Pole
- Provides access to detectors up to 9m
- Product Code: Testifire 9201-001
-
Similar to the Testifire 6001 detector tester kit, the Testifire 9001 kit contains all the equipment you need for safe detector testing of up to 9 meters in height. Kit includes:
- Testifire 1001
- Solo 200 Detector Removal Tool
- Solo 610 Storage Bag
- Solo 100 Access Pole
- 3 x Solo 101 Extension Pole
- Provides access to detectors up to 9m
- Product Code: Testifire 9001-001
-
Testifire 6201 contains a single head unit that is capable of testing smoke, heat and CO detectors of up to 6 metres. Kit includes:
- Testifire 2001
- Solo 200 Detector Removal Tool
- Solo 610 Storage Bag
- Solo 100 Access Pole
- Provides access to detectors up to 6m
- Product Code: Testifire 6201-001
-
The Testifire 6001 kit allows for functional testing and head removal of heat and smoke detectors. Kit includes:
- Testifire 1001
- Solo 200 Detector Removal Tool
- Solo 610 Storage Bag
- Solo 100 Access Pole
- Provides access to detectors up to 6m
- Product Code: Testifire 6001-001
-
The Testifire 2001 offers all the features and benefits of the 1001 – but with the added ability to test CO. CO testing is carried out using a Testifire head unit and a TC3 capsule, safe levels of CO are generated via the capsule once the tester is placed over the detector.
- Two heat settings
- Activation of the widest range of heat sensors (up to 100°C)
- Compatible with Solo access poles
- Able to test for CO
- Product Code: Testifire 2001-001
-
Testifire enables fast, effective testing of single and multi-sensor detectors. Different stimuli (smoke and heat) can be applied in sequence or at the same time.Testifire 1001 Kit Contains:- 1 x Testifire 1000-001 Head Unit
- 1 x TS3-001 Smoke Capsule
- 2 x Solo 770-001 Battery Baton
- 1 x Solo 727-001 Multi-Voltage Fast Charger
-
Testifire enables fast, effective testing of single and multi-sensor detectors. Different stimuli (smoke and heat) can be applied in sequence or at the same time.
- Testifire 1001 Kit Contains:
- 1 x Testifire 1000-001 Head Unit
- 1 x TS3-001 Smoke Capsule
- 2 x Solo 770-001 Battery Baton
- 1 x Solo 727-001 Multi-Voltage Fast Charger
- Testifire 1001 Kit Contains:
-
Our most popular all-in-one detector tester, the Testifire 1001 enables functional testing of both smoke and heat sensors, making it multi-sensor detector tester. Functional smoke testing is carried out using the Testifire 1001 head unit and a TS3 smoke capsule. Testifire 1001 Kit Contains:
- 1 x Testifire 1000-001 Head Unit
- 1 x TS3-001 Smoke Capsule
- 2 x Solo 770-001 Battery Baton
- 1 x Solo 727-001 Multi-Voltage Fast Charger
-
CO generated by Testifire is delivered via capsules. Key features include:- Non-pressurised – easier to store
- On-demand CO generation
- Non-flammable
- Safe – amount of CO produced pose no health risk
- Product Code: TC3-001
-
Highest immunity to false sources Solar blind Suitable for indoor and outdoor areas Unaffected by convection currents, draughts or wind Proven response to multiple fuel types Multi-spectrum detection Selectable output options Selectable response speed Selectable sensitivity levels Built in auto and manual test Low current consumption Fast response to fire; Refineries Generators Compressor Stations High Voltage Equipment Power Plants Fuel Loading Racks Chemical Plants Tunnels uclear Power Sites Storage Tanks Engine Rooms Pharmaceutical Production Military Applications Marine Industry Aircraft Hangars Petrochemical Offshore/Onshore LNG/LPG Production; Worldwide approvals include EN54:10, with VdS and LPCB certification, as well as SIL 2 rated.; Talentum UV / IR2 - Data Sheet Talentum UV / IR2 - Installation Guide Talentum UV / IR2 - User Manual Talentum UV / IR2 - Maintenance Guide Talentum UV / IR2 - Wiring Diagram Talentum UV / IR2 - One detector for every application Distance Sensitivity of the Talentum Flame Detectors What flame detector should I choose? What type of flames can your Talentum detect?
-
Highest immunity to false sources Solar blind High ambient temperature applications Suitable for indoor and outdoor areas Unaffected by convection currents, draughts or wind Proven response to multiple fuel types Multi-spectrum detection Selectable output options Selectable response speed Selectable sensitivity levels Built in auto and manual test Low current consumption Fast response to fire; Refineries Generators Compressor Stations High Voltage Equipment Power Plants Fuel Loading Racks Chemical Plants Tunnels Nuclear Power Sites Storage Tanks Engine Rooms Pharmaceutical Production Military Applications Marine Industry Aircraft Hangars Petrochemical Offshore/Onshore LNG/LPG Production; Talentum UV / IR2 - Data Sheet Talentum UV / IR2 - Product Brochure Talentum UV / IR2 - Installation Guide Talentum UV / IR2 - User Manual Talentum UV / IR2 - Maintenance Guide Talentum UV / IR2 - Wiring Diagram Distance Sensitivity of the Talentum Flame Detector Talentum UV / IR2 - One detector for every application What flame detector should I choose? What type of flames can your Talentum detect?
-
Highest immunity to false sources Increased environmental protection Solar blind Tolerant of fumes, vapours, dust and mist Suitable for indoor and outdoor areas Unaffected by convection currents, draughts or wind Proven response to multiple fuel types Multi-spectrum detection Selectable output options Selectable response speed Selectable sensitivity levels Built in auto and manual test Low current consumption Fast response to fire; Chemical Plants Nuclear Power Sites Engine Rooms Spray Booths Pharmaceutical Production Military Applications Marine Industry Printing Refineries Fuel Loading Racks Storage Tanks Aircraft Hangers Petrochemical Onshore/Offshore Biomass Storage and Handling LNG/LPG Production; ATEX: II 2GD Ex d IIC T6 Zones 1, 21, 2 and 22 SIL 2 rated.; Talentum UV / IR2 - Data Sheet Talentum UV / IR2 - Product Brochure Talentum UV / IR2 - Installation Guide Talentum UV / IR2 - User Manual Talentum UV / IR2 - Maintenance Guide Talentum UV / IR2 - One detector for every application What flame detector should I choose? What type of flames can your Talentum detect? Distance Sensitivity of the Talentum Flame Detectors
-
Highest immunity to false sources Solar blind High ambient temperature applications Tolerant of fumes, vapours, dust and mist Suitable for indoor and outdoor areas Unaffected by convection currents, draughts or wind Proven response to multiple fuel types Multi-spectrum detection Selectable output options Selectable response speed Selectable sensitivity levels Built in auto and manual test Low current consumption Fast response to fire; Chemical Plants Nuclear Power Sites Engine Rooms Spray Booths Pharmaceutical Production Military Applications Marine Industry Printing Refineries Fuel Loading Racks Storage Tanks Aircraft Hangers Petrochemical Onshore/Offshore Biomass Storage and Handling LNG/LPG Production; ATEX: II 2GD Ex d IIC T6 Zones 1, 21, 2 and 22; Talentum UV / IR2 - Data Sheet Talentum UV / IR2 - Product Brochure Talentum UV / IR2 - Maintenance Guide Talentum UV / IR2 - Installation Guide Talentum UV / IR2 - User Manual Distance Sensitivity of the Talentum Flame Detectors What flame detector should I choose? What type of flames can your Talentum detect?
-
Highest immunity to false sources Solar blind Tolerant of fumes, vapours, dust and mist Suitable for indoor and outdoor areas Unaffected by convection currents, draughts or wind Proven response to multiple fuel types Multi-spectrum detection Selectable output options Selectable response speed Selectable sensitivity levels Built in auto and manual test Low current consumption Fast response to fire; Chemical Plants Nuclear Power Sites Engine Rooms Spray Booths Pharmaceutical Production Military Applications Marine Industry Printing Refineries Fuel loading racks Storage tanks Aircraft hangers Petrochemical onshore/offshore Biomass storage and handling LNG/LPG production; ATEX: II 2GD Ex d IIC T6 [Zones 1, 21, 2 and 22] Worldwide approvals include EN54:10, with VdS and LPCB; Talentum UV / IR2 - User Manual Talentum UV / IR2 - Data Sheet Talentum UV / IR2 - Installation Guide Talentum UV / IR2 - Maintenance Guide Talentum UV / IR - One detector for every application Distance Sensitivity of the Talentum Flame Detector What flame detector should I choose What types of flames can Talentum detect?
-
Key Features:; Highest immunity to false sources Suitable for indoor and outdoor areas Detects invisible flames from fuels such as hydrogen and other inorganic fuels Selectable response speed Optical self-test Low power consumption Approved to EN54-10:2002; Aircraft hangars Engine rooms Engine test facilities Generators High voltage equipment Nuclear industry Power plants Storage tanks; Flame Detector - Maintenance Guide Flame Detector - User Manual Flame Detector - Wiring Diagram Flame Detector - Installation Guide Flame Detector - Brochure Flame Detector - Data Sheet Distance Sensitivity of the Talentum Flame Detector What flame detector should I choose? What type of flames can your Talentum detect?
