-
Product Description The Edwards EST GSA-AB4 is a plug-in Audible Detector Base. -
Product Description Edwards EST GSA-CR Vigilant Control Relay Module provides one Form “C” dry relay contact can be used to control external appliances such as door closers, fans, dampers etc. Part of the Signature Series (SIGA) system components.
-
Product Description Edwards EST GSA-CT1 Vigilant Single Input Module mounts to standard North American 1-gang electrical boxe. Separate I/O and data loop connections are made to each module. For use with the Signature Loop Controller.
-
Product Description The Edwards EST GSA-HFS Plug-in Intelligent Fixed Temp (135F) Heat Detector is designed for use with the Signature Loop Controller. COMPATIBLE BASES and ACCESSORIES: — GSA-SB Detector Mounting Base — GSA-SB4 4-inch Detector Mounting Base c/w GSA-TS Trim Skirt — GSA-RB Detector Mounting Base w/Relay — GSA-RB4 4-inch Detector Mounting Base /w Relay c/w GSA-TS Trim Skirt — GSA-IB Detector Mounting Base w/Fault Isolator — GSA-IB4 4-inch Detector Mounting Base w/ Fault Isolator c/w GSA-TS Trim Skirt — GSA-LED Remote Alarm LED — GSA-AB4G Audible (Sounder) Base — GSA-TS4 Trim Skirt (supplied with 4-inch bases)
-
Product Description Edwards EST GSA-M27 Vigilant is a Double Action (Single Stage) Fire Alarm Manual Pull Station. Compatible for use with Vigilant's Signature Loop Controller.
-
Product Description Edwards EST GSA-MCC1S Single Input Signal Module
-
Product Description The Edwards EST GSA-MM1 is a Monitor Module for use only with Vigilant’s Signature Loop Controller. Assigned to one circuit. Configures circuit 1 for Class B normally-open dry contact monitoring input such as from Fans, Dampers, Doors, etc. An ACTIVE signal is sent to the loop controller when the input contact is closed. The active condition is not latched at the module.
-
Product Description The Edwards EST GSA-MP1 is a Signature Module Mounting Plate, 1 footprint.
-
Product Description Edwards EST GSA-PHS 3D Multisensor (Heat / Smoke) Detector
-
Product Description The Edwards EST Vigilant GSA-PS is a plug-in Intelligent Photoelectric Smoke Detector for use with the Signature Series Controller. COMPATIBLE BASES and ACCESSORIES: — SIGA-SB Detector Mounting Base - Standard — SIGA-SB4 4-inch Detector Mounting Base w/ SIGA-TS4 Trim Skirt — SIGA-RB Detector Mounting Base w/Relay — SIGA-RB4 4-inch Detector Mounting Base w/Relay w/ SIGA-TS4 Trim Skirt — SIGA-IB Detector Mounting Base w/Fault Isolator — SIGA-IB4 4-inch Detector Mounting Base w/ Fault Isolator and SIGA-TS4 Trim Skirt — SIGA-LED Remote Alarm LED. (Connects to the SIGA-SB or SIGA-SB4 Standard Base only.) — SIGA-AB4G Audible (Sounder) Base for Fire Detectors — SIGA-AB4GT Audible (Sounder) Base for CO and Fire Detectors — SIGA-TCDR Temporal Pattern Generator — SIGA-CRR Polarity Reversal Relay can be used for sounding to other audible bases on the same 24 Vdc circuit. — SIGA-TS4 Trim Skirt (supplied with 4-inch bases) — SIGA-DMP Detector Mounting Plate — SIGA-RTA Detector Removal Tool — SIGA-VA Detector Cleaning Tool
-
Product Description Edwards EST GSA-RM1 Riser Monitor Module
-
Product Description The Edwards GSA-SD SuperDuct Intelligent Photoelectric Smoke Sensor features electronic addressing and issues a dirty sensor warning when it reaches its preset limit. Part of the "Signature Series," for use with GE's Signature Loop Controller. Mounts to standard 1-gang box, or standard 4-in square box, 1-1/2 inches deep, with 1-gangcover.
