/All Products
  • Product Description The Edwards EST SIGA-270 is a one stage intelligent Manual Pull Station compatible for use only with the Signature Loop Controller. One pull on the station handle breaks the glass rod and triggers an alarm. Microprocessor stores programmable address, serial number, type of device, job number, hours of operation, last maintenance date, number of alarms and troubles, and time and date of last alarm. One device address is required. The loop controller assigns an address to the station automatically. A custom address can be assigned to the station via laptop computer; no addressing switches are used.
    Details
  • Product Description The Edwards EST SIGA-270P is a Single Action Two Stage (Presignal) Manual Pull Station compatible for use only with the Signature Loop Controller. Microprocessor stores programmable address, serial number, type of device, job number, hours of operation, last maintenance date, number of alarms and troubles, and time and date of last alarm. One device address is required. The loop controller assigns an address to the station automatically. A custom address can be assigned to the station via laptop computer; no addressing switches are used.
    Details
  • Product Description Edwards EST SIGA-278 Fire Alarm Pull Station is an addressable contemporary style manual station made from durable red colored lexan. Signature Series manual stations are compatible only with EST’s Signature Loop Controller. The loop controller electronically addresses each manual station. Mounts to 2½ inch (64 mm) deep single-gang boxes.
    Details
  • Product Description Edwards EST SIGA-AA30 Intelligent Audio Amplifier – 30 Watt. Two riser inputs, 1/25 Vrms. Output selectable 25/70 Vrms. Communicates with panel via Signature or GSA Data Circuit. . COMPATIBLE power sources — System power, MIRMIRBPS6A/10A, APS6A/10A; SIGA-APS (for retrofit only) COMPATIBLE enclosures — 2-WB3(R), 2-WB7(R), RACCR, APS6A, APS10A
    Details
  • Product Description Edwards EST SIGA-AA50 Intelligent Audio Amplifier Board
    Details
  • Product Description The Edwards EST SIGA-AB4G Audible (Sounder) Detector Base is designed for use with Signature Series detectors and GE's Signature Loop Controller. The sounder base uses two reversible jumpers to select any one of four outputs: 1—High dBA; Temporal Tone output (default). 2—High dBA; Steady Tone output. 3—Low dBA; Temporal Tone output. 4—Low dBA; Steady Tone output. For use with Edwards / EST Signature Series detectors: — SIGA-IS Ionization Smoke Detector — SIGA-PS Photoelectric Smoke Detector — SIGA-PHS Combination Photoelectric Smoke and Fixed-Temperature Heat Detector — SIGA-IPHS Combination Ionization, Photoelectric, and Thermal Boost Type Smoke Detector — SIGA-HFS Fixed-Temperature Heat Detector — SIGA-HRS Combination Rate-of-Rise, and Fixed-Temperature Heat Detector
    Details
  • Product Description The Signature Series model SIGA-AB4GT CO Compatible Sounder Base is a sounder base specifically designed for use with CO sensors. It is not compatible with a coded system. The base uses the same address and programming label as the detector it supports. It requires a SIGA-TCDR Temporal Pattern Generator to add the audible output function to any Signature Series detector
    Details
  • Product Description The Edwards EST SIGA-APS Intelligent Auxiliary Power Supply is a switch mode supply that provides additional power for any Fire Alarm Control Panel that contains a Signature Data Circuit. May be mounted remotely to supply power to remote signaling devices, amplifiers or system equipment. Takes two input module addresses, provides power supply status to control panel 6.4 Amp output provided through two 3.2 Amp output taps Charges up to 10 Amp-Hour Batteries
    Details
  • Product Description Edwards EST SIGA-CC1 Single Input Signal Modules are intelligent addressable devices used for connecting a supervised Class B signal or audio speaker to their respective power inputs on command from the loop controller. In addition, the SIGA-CC1 can connect telephone circuits to power inputs on command from the loop controller. See also SIGA-MCC1 for equivalent product.
    Details
  • Product Description Edwards EST SIGA-CC1S Sync Module
    Details
  • Product Description Edwards EST SIGA-CC2 Dual Input Signal Module
    Details
  • Product Description The Control Relay Module Model EST SIGA-CR, is a component of the Signature Series System. The SIGA-CR is an addressable device used to provide one Form "C" dry relay contact to control external appliances (door closers, fans, dampers, etc.) or equipment shutdown. The Edwards EST SIGA-CR requires the Signature Loop Controller. Can be mounted in a North American 2-1/2" (64 mm) deep 1-gang box, or standard 4" square 1-1/2" (38 mm) deep box with 1-gang cover.
    Details