/All Products
  • Product Description The Edwards EST SIGA-SD Photoelectric Duct Smoke Sensor is part of the electronic addressable Signature Series of fire alarm controls and accessories from GE / EST Fire Life and Safety. Compatible only for use with Edwards EST Signature Loop Controller. Provides one Form C auxiliary alarm relay for controlling ancillary equipment (e.g., HVAC controls). -20 to 158 °F (-29 to 70 °C) operating range with 100 ft/min. to 4,000 ft/min air velocity rating 15.2 to 19.95 VDC operation COMPATIBLE BASES and ACCESSORIES: — SIGA-SB Detector Mounting Base - Standard — SIGA-SB4 4-inch Detector Mounting Base w/ SIGA-TS4 Trim Skirt — SIGA-RB Detector Mounting Base w/Relay — SIGA-RB4 4-inch Detector Mounting Base w/Relay w/ SIGA-TS4 Trim Skirt — SIGA-IB Detector Mounting Base w/Fault Isolator — SIGA-IB4 4-inch Detector Mounting Base w/ Fault Isolator and SIGA-TS4 Trim Skirt — SIGA-LED Remote Alarm LED. (Connects to the SIGA-SB or SIGA-SB4 Standard Base only.) — SIGA-AB4G Audible (Sounder) Base for Fire Detectors — SIGA-AB4GT Audible (Sounder) Base for CO and Fire Detectors — SIGA-TCDR Temporal Pattern Generator — SIGA-CRR Polarity Reversal Relay can be used for sounding to other audible bases on the same 24 Vdc circuit. — SIGA-TS4 Trim Skirt (supplied with 4-inch bases) — SIGA-DMP Detector Mounting Plate — SIGA-RTA Detector Removal Tool — SIGA-VA Detector Cleaning Tool
    Details
  • Product Description The Edwards EST SIGA-SB4 is a Standard 4-inch Detector Mounting Base with SIGA-TS Trim Skirt. For use with these Edwards / EST Signature Series detectors: — SIGA-IS Ionization Smoke Detector — SIGA-PS Photoelectric Smoke Detector — SIGA-PHS Combination Photoelectric Smoke and Fixed-Temperature Heat Detector — SIGA-IPHS Combination Ionization, Photoelectric, and Thermal Boost Type Smoke Detector — SIGA-HFS Fixed-Temperature Heat Detector — SIGA-HRS Combination Rate-of-Rise, and Fixed-Temperature Heat Detector
    Details
  • Product Description Edwards EST SIGA-SB Standard Plug-in Detector Base is designed for use with Edwards / EST Signature Series detectors and GE's Signature Loop Controller. See also: SIGA-SB4 Standard Detector Base, 4-inch For use with these Edwards / EST Signature Series detectors: — SIGA-IS Ionization Smoke Detector — SIGA-PS Photoelectric Smoke Detector — SIGA-PHS Combination Photoelectric Smoke and Fixed-Temperature Heat Detector — SIGA-IPHS Combination Ionization, Photoelectric, and Thermal Boost Type Smoke Detector — SIGA-HFS Fixed-Temperature Heat Detector — SIGA-HRS Combination Rate-of-Rise, and Fixed-Temperature Heat Detector
    Details
  • Product Description EST SIGA-RM1 Riser Monitor Module
    Details
  • Product Description The SIGA-REL Releasing Module is a network component that provides control for fire suppression routines. It fulfils much the same purpose as a standalone releasing panel, but supports Signature Series detectors as an integral part of the suppression system.
    Details
  • Product Description Edwards EST SIGA-RB4 Relay Base is a plug-in Detector Base with a Form 'C' Relay. Includes TS4 trim skirt. For use with Signature Loop Controller. Mounts to 4 inch standard electrical box.
    Details
  • Product Description Edwards EST SIGA-RB Detector Base (with Relay) is part of the Signature Series of Intelligent Addressable Initiating Devices. For use with Edwards / EST Signature Series detectors: —SIGA-IS Ionization Smoke Detector —SIGA-PS Photoelectric Smoke Detector —SIGA-PHS Combination Photoelectric Smoke and Fixed-Temperature Heat Detector —SIGA-IPHS Combination Ionization, Photoelectric, and Thermal Boost Type Smoke Detector —SIGA-HFS Fixed-Temperature Heat Detector —SIGA-HRS Combination Rate-of-Rise, and Fixed-Temperature Heat Detector
    Details
  • Product Description The Edwards EST SIGA-PHD provides an optical smoke sensor and a rate-of-rise heat sensor with a fixed temperature setting. The SIGA-PHD detector is compatible only for use with the Signature Loop Controller. COMPATIBLE BASES and ACCESSORIES: — SIGA-SB Detector Mounting Base - Standard — SIGA-SB4 4-inch Detector Mounting Base w/ SIGA-TS4 Trim Skirt — SIGA-RB Detector Mounting Base w/Relay — SIGA-RB4 4-inch Detector Mounting Base w/Relay w/ SIGA-TS4 Trim Skirt — SIGA-IB Detector Mounting Base w/Fault Isolator — SIGA-IB4 4-inch Detector Mounting Base w/ Fault Isolator and SIGA-TS4 Trim Skirt — SIGA-LED Remote Alarm LED. (Connects to the SIGA-SB or SIGA-SB4 Standard Base only.) — SIGA-AB4 Audible (Sounder) Base — SIGA-CRR Polarity Reversal Relay can be used for sounding to other audible bases on the same 24 Vdc circuit. — SIGA-TS4 Trim Skirt (supplied with 4-inch bases) — SIGA-DMP Detector Mounting Plate — SIGA-RTA Detector Removal Tool — SIGA-VA Detector Cleaning Tool
    Details
  • Product Description NOTE: This part is discontinued by the manufacturer. Replace with: SIGA-OSHCD. Edwards EST SIGA-PHCD Intelligent Multisensor is compatible only with the Signature Loop Controller. COMPATIBLE BASES and ACCESORIES: — SIGA-SB Detector Mounting Base - Standard — SIGA-SB4 4-inch Detector Mounting Base c/w Trim Skirt — SIGA-RB Detector Mounting Base w/Relay — SIGA-RB4 4-inch Detector Mounting Base w/Relay, c/w Trim Skirt — SIGA-IB Detector Mounting Base w/Fault Isolator — SIGA-IB4 4-inch Detector Mounting Base w/ Fault Isolator, c/w Trim Skirt — SIGA-LED Remote Alarm LED (not for EN54 applications) — SIGA-AB4G-LF Low Frequency Audible (Sounder) Base for CO and Fire Detectors 0.3 (0.15) — SIGA-AB4GT Audible (Sounder) Base for CO and Fire Detectors 0.3 (0.15) — SIGA-TS4 Trim Skirt (supplied with 4-inch bases) 0.1 (.04) — SIGA-TSB Trim Skirt for 4” Base, Black 0.1 (.04) — SIGA-DMP Detector Mounting Plate
    Details
  • Product Description Edwards EST SIGA-PD Optical Smoke Sensor is intended for use with the Signature Loop Controller. COMPATIBLE BASES and ACCESSORIES: — SIGA-SB Detector Mounting Base - Standard — SIGA-SB4 4-inch Detector Mounting Base w/ SIGA-TS4 Trim Skirt — SIGA-RB Detector Mounting Base w/Relay — SIGA-RB4 4-inch Detector Mounting Base w/Relay w/ SIGA-TS4 Trim Skirt — SIGA-IB Detector Mounting Base w/Fault Isolator — SIGA-IB4 4-inch Detector Mounting Base w/ Fault Isolator and SIGA-TS4 Trim Skirt — SIGA-LED Remote Alarm LED. (Connects to the SIGA-SB or SIGA-SB4 Standard Base only.) — SIGA-AB4G Audible (Sounder) Base for Fire Detectors — SIGA-AB4GT Audible (Sounder) Base for CO and Fire Detectors — SIGA-TCDR Temporal Pattern Generator — SIGA-CRR Polarity Reversal Relay can be used for sounding to other audible bases on the same 24 Vdc circuit. — SIGA-TS4 Trim Skirt (supplied with 4-inch bases) — SIGA-DMP Detector Mounting Plate — SIGA-RTA Detector Removal Tool — SIGA-VA Detector Cleaning Tool
    Details
  • Product Description Edwards EST SIGA-PCD Smoke and CO Detector is compatible only for use with the Signature Loop Controller. COMPATIBLE BASES and ACCESSORIES: — SIGA-SB Detector Mounting Base - Standard — SIGA-SB4 4-inch Detector Mounting Base w/ SIGA-TS4 Trim Skirt — SIGA-RB Detector Mounting Base w/Relay — SIGA-RB4 4-inch Detector Mounting Base w/Relay w/ SIGA-TS4 Trim Skirt — SIGA-IB Detector Mounting Base w/Fault Isolator — SIGA-IB4 4-inch Detector Mounting Base w/ Fault Isolator and SIGA-TS4 Trim Skirt — SIGA-LED Remote Alarm LED. (Connects to the SIGA-SB or SIGA-SB4 Standard Base only.) — SIGA-AB4G Audible (Sounder) Base for Fire Detectors — SIGA-AB4GT Audible (Sounder) Base for CO and Fire Detectors — SIGA-TCDR Temporal Pattern Generator — SIGA-CRR Polarity Reversal Relay can be used for sounding to other audible bases on the same 24 Vdc circuit. — SIGA-TS4 Trim Skirt (supplied with 4-inch bases) — SIGA-DMP Detector Mounting Plate — SIGA-RTA Detector Removal Tool — SIGA-VA Detector Cleaning Tool
    Details
  • Product Description Edwards EST SIGA-OSD Signature Optica Smoke Detector is compatible only with control panels using a Signature Loop controller. BASES AND ACCESSORIES — SIGA-SB Detector Mounting Base - Standard — SIGA-SB4 4-inch Detector Mounting Base c/w Trim Skirt — SIGA-RB Detector Mounting Base w/Relay — SIGA-RB4 4-inch Detector Mounting Base w/Relay, c/w Trim Skirt — SIGA-IB Detector Mounting Base w/Fault Isolator — SIGA-IB4 4-inch Detector Mounting Base w/ Fault Isolator, c/w Trim Skirt — SIGA-LED Remote Alarm LED (not for EN54 applications) — SIGA-AB4G Audible (Sounder) Base for Fire Detectors — SIGA-AB4G-LF Low Frequency Audible (Sounder) Base for CO and/or Fire Detectors — SIGA-AB4GT Audible (Sounder) Base for CO and/or Fire Detectors — SIGA-TS4 Trim Skirt (supplied with 4-inch bases) — SIGA-TS Trim Skirt - (optional for non 4-inch bases) — SIGA-DMP Detector Mounting Plate
    Details
  • Product Description The Edwards EST SIGA-MP2L Signature Module Mounting Plate is a flat aluminum plate which mounts in EST's standard equipment enclosures. Any combination of the SIGA modules can be mounted on the SIGA-MP2L.
    Details
  • Product Description The Edwards EST SIGA-MP1 Signature Module Mounting Plate is a flat aluminum plate which mounts in EST's standard equipment enclosures. The SIGA-MP1 allows for installation of four (4) SIGA-CC1's, SIGA-CC2's., or SIGA-UM's (larger modules) or eight (8) CT-1's, CT-2's, SIGA-CR's, SIGAMM1's, or SIGA-WTM's (smaller modules). Any combination of the SIGA modules can be mounted on the SIGA-MP1.
    Details
  • Product Description Edwards EST SIGA-MM1 Monitor Module
    Details
  • Product Description Edwards EST SIGA-MIO Input/Output Module
    Details
  • Product Description Edwards EST SIGA-MFT (Map Fault Finder Tool) is a powerful diagnostic tool that pinpoints mapping issues on the Signature Series signaling line sircuit (SLC). The SIGA-MFT connects between the SLC and a laptop computer through a standard USB port and reports onscreen, via Windows 7 compatible software.
    Details
  • Product Description The Edwards EST SIGA-MDM Digital Message Module provides the ability to add custom prerecorded voice messaging to EST’s Network and Non-network systems. The SIGA-MDM provides storage for two 30 second messages in its non-volatile EEPROM memory. The Edwards EST SIGA-MDM is part of the UIO family of plug-in Signature Series modules. The SIGA-MDM Digital Message Module mounts to a UIO motherboard. Plug the module into any available position on the motherboard and secure the module to the motherboard with the captive screws. Wiring connections are made to the terminals on the motherboard.
    Details
  • Product Description Edwards EST SIGA-MCT2 Dual Input Module is an intelligent analog addressable device used to connect one or two Class B normally-open Alarm, Supervisory, or Monitor type dry contact Initiating Device Circuits (IDC). Uses Two Module Addresses. Plugs into a SIGA-UIO2R / SIGA-UIO6R / SIGA-UIO6 Motherboard. EST's SIGA-MCT2 is part of the UIO family of plug-in Signature Series modules and is designed for use only with EST's Signature Loop Controller.
    Details
  • Product Description The Edwards EST SIGA-MCRR Polarity Reversal Relay Module is an addressable Signature Series component used to power and activate the audible sounder in Signature Audible Detector Bases. UIO Mount.
    Details
  • Product Description The Edwards EST SIGA-MCR Control Relay Module is an addressable Signature Series component. A Form C dry contact relay in the SIGA-MCR may control equipment shutdown or external appliances like door closers, fans, and dampers. Edwards EST's SIGA-MCR plugs into any available module space on a SIGA-UIO(R) series motherboard, and captive screws secure it to the board. All wiring connections are made to terminals on the motherboard.
    Details
  • Product Description The Edwards EST SIGA-MCC2 is a Dual Input (Riser) Signal Module compatible for use with XLS100 and XLS1000 Loop Controllers.
    Details
  • Product Description Edwards EST SIGA-MCC1S Synchronization Output Module
    Details
  • Product Description The Edwards EST SIGA-MCC1 is a Single Input Riser I/O Control Module intended for use with the Signature Loop Controller. See also SIGA-CC1 for equivalent product.
    Details
  • Product Description The Edwards EST SIGA-MAB is a Plug-in (UIO) Universal A/B Module. Plugs into UIO2R, UIO6R or UIO6 Motherboards. Uses Two Module Addresses. Module function is determined by the personality code selected by the installer. Features 14 programmable personality codes. For use exclusively with the Signature Loop Controller.
    Details
  • Product Description The Edwards EST model SIGA-LED Remote Alarm Indicator connects to the SIGA-SB or SIGA-SB4 Standard Base only. It features a North American single-gang plastic faceplate with a white finish and red alarm LED.
    Details
  • Product Description NOTE: This part is discontinued by the manufacturer. Replace with: SIGA-IPHS. The Edwards EST SIGA-IS is a plug-in Ionization Smoke Detector. COMPATIBLE BASES and ACCESSORIES: — SIGA-SB Detector Mounting Base - Standard — SIGA-SB4 4-inch Detector Mounting Base w/ SIGA-TS4 Trim Skirt — SIGA-RB Detector Mounting Base w/Relay — SIGA-RB4 4-inch Detector Mounting Base w/Relay w/ SIGA-TS4 Trim Skirt — SIGA-IB Detector Mounting Base w/Fault Isolator — SIGA-IB4 4-inch Detector Mounting Base w/ Fault Isolator and SIGA-TS4 Trim Skirt — SIGA-LED Remote Alarm LED. (Connects to the SIGA-SB or SIGA-SB4 Standard Base only.) — SIGA-AB4G Audible (Sounder) Base for Fire Detectors — SIGA-AB4GT Audible (Sounder) Base for CO and Fire Detectors — SIGA-TCDR Temporal Pattern Generator — SIGA-CRR Polarity Reversal Relay can be used for sounding to other audible bases on the same 24 Vdc circuit. — SIGA-TS4 Trim Skirt (supplied with 4-inch bases) — SIGA-DMP Detector Mounting Plate — SIGA-RTA Detector Removal Tool — SIGA-VA Detector Cleaning Tool
    Details
  • Product Description The Edwards EST SIGA-IO is an Input Output Module. The actual operation of the SIGA-IO and MIO is determined by the “personality code” selected by the installer, which is downloaded to the module from the loop controller during system configuration. Input/Output Modules are compatible with GE Security’s Signature Loop Controller operating under EST3 version 3.0 or higher, and QuickStart Signature Loop Intelligent Controller. Mounts to a standard North American one-gang electrical box, making it ideal for locations where only one module is required. Separate I/O and data loop connections are made to each module.
    Details
  • Product Description Edwards EST SIGA-IM Isolator Module (IM) is an addressable device that protects a signaling line circuit (SLC) from a to wire-to-wire short. The SIGA-IM module monitors line voltages and opens the data line when a short is detected, isolating the short between the two modules located electrically closest to the short. The loop controller assigns an address to the SIGA-IM module. The module uses one detector address on the SLC.
    Details
  • Product Description Edwards EST SIGA-IB4 4-inch Isolator Detector Base is intended for use with Signature Series Sensors. Features a built-in line fault isolator for use on Class A circuits. A detector must be installed for it to operate. The isolator base does not support the SIGA-LED Remote LED. Includes SIGA-TS4 Trim Skirt.
    Details
  • Product Description Edwards EST SIGA-IB Isolator Detector Base is intended for use with Signature Series Sensors. Includes a built-in line fault isolator for use on Class A circuits. A detector must be installed for it to operate. The isolator base does not support the SIGA-LED Remote LED.
    Details
  • Product Description Edwards EST SIGA-HRD Fixed Temp / RoR Heat Detector is designed for use with the Signature Loop Controller. COMPATIBLE BASES and ACCESSORIES: — SIGA-SB Detector Mounting Base - Standard — SIGA-SB4 4-inch Detector Mounting Base w/ SIGA-TS4 Trim Skirt — SIGA-RB Detector Mounting Base w/Relay — SIGA-RB4 4-inch Detector Mounting Base w/Relay w/ SIGA-TS4 Trim Skirt — SIGA-IB Detector Mounting Base w/Fault Isolator — SIGA-IB4 4-inch Detector Mounting Base w/ Fault Isolator and SIGA-TS4 Trim Skirt — SIGA-LED Remote Alarm LED. (Connects to the SIGA-SB or SIGA-SB4 Standard Base only.) — SIGA-AB4G Audible (Sounder) Base for Fire Detectors — SIGA-AB4GT Audible (Sounder) Base for CO and Fire Detectors — SIGA-TCDR Temporal Pattern Generator — SIGA-CRR Polarity Reversal Relay can be used for sounding to other audible bases on the same 24 Vdc circuit. — SIGA-TS4 Trim Skirt (supplied with 4-inch bases) — SIGA-DMP Detector Mounting Plate — SIGA-RTA Detector Removal Tool — SIGA-VA Detector Cleaning Tool NOTE: Replaces SIGA-HFS & SIGA-HRS
    Details
  • Product Description NOTE: This part is discontinued by the manufacturer. Replace with: SIGA-HFD Edwards EST SIGA-HFS Fixed Temp Heat Detector is an intelligent addressable device featuring a microprocessor which minimizes false alarms. Compatible only for use with Edwards EST Security’s Signature Loop Controller. COMPATIBLE BASES and ACCESSORIES: — SIGA-SB Detector Mounting Base - Standard — SIGA-SB4 4-inch Detector Mounting Base w/ SIGA-TS4 Trim Skirt — SIGA-RB Detector Mounting Base w/Relay — SIGA-RB4 4-inch Detector Mounting Base w/Relay w/ SIGA-TS4 Trim Skirt — SIGA-IB Detector Mounting Base w/Fault Isolator — SIGA-IB4 4-inch Detector Mounting Base w/ Fault Isolator and SIGA-TS4 Trim Skirt — SIGA-LED Remote Alarm LED. (Connects to the SIGA-SB or SIGA-SB4 Standard Base only.) — SIGA-AB4G Audible (Sounder) Base for Fire Detectors — SIGA-AB4GT Audible (Sounder) Base for CO and Fire Detectors — SIGA-TCDR Temporal Pattern Generator — SIGA-CRR Polarity Reversal Relay can be used for sounding to other audible bases on the same 24 Vdc circuit. — SIGA-TS4 Trim Skirt (supplied with 4-inch bases) — SIGA-DMP Detector Mounting Plate — SIGA-RTA Detector Removal Tool — SIGA-VA Detector Cleaning Tool
    Details
  • Product Description The Edwards EST SIGA-HFD Intelligent Fixed Temp Heat Detector is designed for use with the Signature Loop Controller. COMPATIBLE BASES and ACCESSORIES: — SIGA-SB Detector Mounting Base - Standard — SIGA-SB4 4-inch Detector Mounting Base w/ SIGA-TS4 Trim Skirt — SIGA-RB Detector Mounting Base w/Relay — SIGA-RB4 4-inch Detector Mounting Base w/Relay w/ SIGA-TS4 Trim Skirt — SIGA-IB Detector Mounting Base w/Fault Isolator — SIGA-IB4 4-inch Detector Mounting Base w/ Fault Isolator and SIGA-TS4 Trim Skirt — SIGA-LED Remote Alarm LED. (Connects to the SIGA-SB or SIGA-SB4 Standard Base only.) — SIGA-AB4G Audible (Sounder) Base for Fire Detectors — SIGA-AB4GT Audible (Sounder) Base for CO and Fire Detectors — SIGA-TCDR Temporal Pattern Generator — SIGA-CRR Polarity Reversal Relay can be used for sounding to other audible bases on the same 24 Vdc circuit. — SIGA-TS4 Trim Skirt (supplied with 4-inch bases) — SIGA-DMP Detector Mounting Plate — SIGA-RTA Detector Removal Tool — SIGA-VA Detector Cleaning Tool
    Details
  • Product Description The Edwards EST SIGA-HDT Signature Handheld Diagnostic Tool is designed to help users locate and resolve issues during installation or on an existing system. The tool can be used to initialize a Signature loop before connecting to a control panel or it can be used for diagnosis of an existing loop. The SIGA-HDT is shipped with the Signature Diagnostic Tool Software (p/n 7350894) which is compatible with Windows 7 and 10 Operating systems.
    Details
  • Product Description The SIGA-DTS Duct Test Station uses a key switch along with an integral intelligent input module mounted on a two-gang plastic plate. It is supplied with two keys and features a red alarm LED. When the key is turned to the “TEST” position, the LED lights and the integral module remotely inputs a duct detector test alarm. The Duct Test Station mounts to standard 2-inch deep North American two-gang and 4-inch square electrical boxes and European 100 mm square boxes.
    Details