-
Product Description The Edwards EST SD-T42 is a 42-inch Sampling Tube designed for use with SIGA-SD. -
Product Description The Edwards EST SD-T24 24-inch Sampling Tube is designed for use with SIGA-SD.
-
Product Description Edwards SD-2W Photoelectric Duct Smoke Detector 2-Wire Conventional
-
Product Description The Edwards EST SD-T18 is an 18" Sampling Tube for use with the SuperDuct SD Series Duct Detectors.
-
Product Description Edwards SA-232 RS-232 Interface Card provides an RS-232 interface to the panel. The card can be used for connecting a printer to the control panel to print system events. The card can also be used for uploading and downloading panel configuration, history, and current status to a PC running the configuration utility.
-
Product Description Edwards SA-DACT Small Analog Series Dual Line Dialer
-
Product Description Edwards RS-232 Interface for ESA 2000
-
-
Product Description Edwards RLCD-R is a LCD text annunciator without common controls. The RLCD-R annunciator communicates with the FACP on the RS-485 data riser. Can be configured for Class A or Class B communication. Requires 24 VDC, continuous. Operate as a stand-alone unit that can be powered by the FACP or by an approved power supply. Mounts on a standard 4 in. square electrical box, using the included mounting ring. Can also be surface mounted in locking steel enclosures.
-
Product Description The Edwards EST QS-FUSE is a Replacement Fuse for Primary power input. For use with QuickStart FACPs.
-
Product Description Edwards EST RAI Remote Annunciator Interface
-
Product Description Edwards EST QS-232 UART Module is a UART expansion card for use with QuickStart FACPs.
-
Product Description The Edwards EST NT-A is a Class A RS-485 Remote Annunciation Card, includes QS-232. Requires 1 option space.
-
Product Description The Edwards P-039250 Steel Back Box is designed for surface mounting Edwards 270 Series Manual Pull Stations.
-
Product Description Edwards EST MPSR1-S45W-GE Pull Station
-
Product Description The Edwards MFC-A FSRRM Mounting Cabinet holds up to 4 FSRRM modules with optional FSRRM-S11 mounting-track. Dimensions: 8 x 14 x 3.5 inches For surface mounting.
-
Product Description NOTE: This part is discontinued by the manufacturer. Edwards EST M501MF Intelligent Addressable Mini Monitor Module provides an address for a group of Normally Open (N.O.) initiating devices. The small size of the M501MF allows it to fit inside devices or junction boxes behind devices.
-
Product Description The Edwards EST M500XF is an Addressable Fault Isolator Module is compatible for use with EST3 Systems.
-
Product Description Edwards EST M500SF Supervised Control Module
-
Product Description The Edwards EST M500MF(B) is an intelligent Control Monitor Module.
-
Product Description Edwards EST M500RF Addressable Relay Control Module is intended for use with intelligent 2-wire systems. Mounts directly to 4-inch square electrical boxes. The module can also mount to the DNR Duct Detector Housing. COMPATIBLE ACCESSORIES: — SMB500 Surface Mount Electrical Box — CB500 Module Barrier
-
Product Description Edwards IOP3A RS-232 Optical Isolator Card
-
Product Description This is the replacement board for an Edwards EST LSS4 Fire Alarm Control Panel. Supports an optional PC based configuration program. Does not include power supply.
-
-
-
Product Description The Edwards EST IO64GD Intelligent Fire Alarm Control Panel is a 1 Loop System, 64 point capacity, 2 Class B NACs, 2 Line Dialer, gray door, surface mount enclosure, 115 VAC, English interface. This panel features the Signature Loop controller, compatible for use with SIGA-xx detectors and addressable modules. COMPATIBLE EXPANSION CARDS: — SA-232 Serial Port (RS-232), for connection to printers & computers — SA-ETH Ethernet Port, Slave — SA-CLA Class A adapter module. Provides Class A capacity on NACs — D16L-iO-1 LED Annunciator module, 16 X 2-LED zones (4 max programmable for sup) — D8RY-iO-1 (Note 1) LED Annunciator module, 16 X 2-LED zones (4 alarm only, 8 supervisory only, 4 alarm or supervisory) PROGRAMMING TOOLS: — iO-CU EST Series configuration and diagnostics utility — 260097 RS232 cable, 4 conductor, DB9 PC interface
-
-
-
-
Product Description Edwards EST GSA-RM1 Riser Monitor Module
-
Product Description The Edwards GSA-SD SuperDuct Intelligent Photoelectric Smoke Sensor features electronic addressing and issues a dirty sensor warning when it reaches its preset limit. Part of the "Signature Series," for use with GE's Signature Loop Controller. Mounts to standard 1-gang box, or standard 4-in square box, 1-1/2 inches deep, with 1-gangcover.
-
Product Description The Edwards EST Vigilant GSA-PS is a plug-in Intelligent Photoelectric Smoke Detector for use with the Signature Series Controller. COMPATIBLE BASES and ACCESSORIES: — SIGA-SB Detector Mounting Base - Standard — SIGA-SB4 4-inch Detector Mounting Base w/ SIGA-TS4 Trim Skirt — SIGA-RB Detector Mounting Base w/Relay — SIGA-RB4 4-inch Detector Mounting Base w/Relay w/ SIGA-TS4 Trim Skirt — SIGA-IB Detector Mounting Base w/Fault Isolator — SIGA-IB4 4-inch Detector Mounting Base w/ Fault Isolator and SIGA-TS4 Trim Skirt — SIGA-LED Remote Alarm LED. (Connects to the SIGA-SB or SIGA-SB4 Standard Base only.) — SIGA-AB4G Audible (Sounder) Base for Fire Detectors — SIGA-AB4GT Audible (Sounder) Base for CO and Fire Detectors — SIGA-TCDR Temporal Pattern Generator — SIGA-CRR Polarity Reversal Relay can be used for sounding to other audible bases on the same 24 Vdc circuit. — SIGA-TS4 Trim Skirt (supplied with 4-inch bases) — SIGA-DMP Detector Mounting Plate — SIGA-RTA Detector Removal Tool — SIGA-VA Detector Cleaning Tool
-
Product Description The Edwards EST GSA-MP1 is a Signature Module Mounting Plate, 1 footprint.
-
Product Description Edwards EST GSA-PHS 3D Multisensor (Heat / Smoke) Detector
-
Product Description Edwards EST GSA-MCC1S Single Input Signal Module
-
Product Description The Edwards EST GSA-MM1 is a Monitor Module for use only with Vigilant’s Signature Loop Controller. Assigned to one circuit. Configures circuit 1 for Class B normally-open dry contact monitoring input such as from Fans, Dampers, Doors, etc. An ACTIVE signal is sent to the loop controller when the input contact is closed. The active condition is not latched at the module.
