-
One Minute Auto-Alignment – The Fireray One’s one-minute auto-alignment feature not only saves time during installation, the quality of alignment is also guaranteed by the automation protocol. Using the Fireray One, a high level of protection is always achieved. One standalone product – The Fireray One is a standalone reflective beam detector that requires no specialist tools or prior knowledge or training to get it up and working. One personal installation – All of the internal and external features of the Fireray One ensure that anyone can align the beam detector perfectly, because the experience and expert knowledge of beam detection has been engineered into the product! Movement Tracker – The Fireray One contains Building Movement Tracking that maintains its own alignment once installed. Its optics are fully enclosed in an IP-rated casing with a flat surface for easy cleaning without affecting alignment. An integrated user-interface at the front of the product allows realignment and programming without having to dismount the detector. -
The PX-1 is a stand-alone smoke alarm complying with EN 14604, equipped with a built-in long-term lithium battery. Our devices therefore do not require annoying and expensive battery changes. This represents just one of the many ways how we actively contribute to the protection of our environment.
- CE label according to DIN EN 14604, ROHS, German TÜV.
- Made In Germany
- 12 years of battery life (lithium).
- Bi-sensor processor technology (smoke + heat).
- Certified magnetic carrier system with special adhesive gel pad.
- Maximum false alarm protection.
- Kitchen suitable (Condensation Barriers).
- Insect Shield.
- Alarm signal > 85 dB.
- 60 m² detection range
- Large, easy to use testing/stop button (78 cm²)
- No battery change necessary
- Processor technology / intelligent software analysis of sensor readings
- Cyclical genuine self-test function
- Help signal (e.g. low battery status or contamination)
-
Technical Specifications
Model: Top Light
Features:
- Lamp - Halogen 55w
- Color/Body - Black/3mm thick ABS
- Dimension (Approx) - 25cmL, 16.5 cm front dia & 13.5cm rear dia
- Weight (Approx) - 3.7 Kg
- Light Range (Approx) - 1 km / 1094 Yards
- Battery - SMF 12V7Ah
- Battery Charger - Inbuilt
- Charging - Input Voltage 220+ 10%AC single phase 50 cycle
- Solar Charging - optionally available
- Operation Modes - Continuous flasher, dimmer and timer mode
- Operation Time (continuous mode on full charge) - 60 Min ( + 10 Min)
- Dimmer - YES
- Flasher - Auto (time variable)
- Membrane Switches - YES
- Charging Time (Approx) - 10h
- Handle is integral part of the body - YES
- Water Resistant - YES
- Charging Indicator - YES
- Adjustable Shoulder Strap - YES
- Toughened Glass - Optional
- Sound Signal for Extreme high/low/dimmer & auto-flasher level - YES
- Restarts at same dimmer level at which it was last put off - YES
- Master Push to ON Switch - Yes
- Low Battery Indicator - YES
- AC/DC blown fuse indicator - YES
- Auto Emergency light ON function; in case of power failure when in charging mode - YES
-
-
Features:; Low Cost Clear Easy to fit and Replace Retro Fit
-
This three-in-one antibiotic is packaged in a 0.9 gm unit dose packet for individual application without cross-contamination. Bulk pack is well suited for first aid kit packers. Item WJTABULK Case Pack: bulk / 1,728 pcs. per case Case Weight: 5.8 lbs. Case Cube: .66 cu. ft. Case Size: 18in. x 9in. x 6in. (47.7 x 22.8 x 17.7 cm) Individual Packet Size: 0.9 gm
-
For those also requiring the Solo access pole, the Trutest 800 provides everything you need – with access up to 6 metres provided with the Solo 100.Product includes:
- Trutest 801 smoke detector sensitivity tester
- Solo 100 Access Pole
- Storage case and pole bag
- Product Code: Trutest 800-001
-
The Trutest 801 has been designed for engineers to measure the sensitivity of smoke detectors quickly, accurately and with maximum efficiency. The Trutest 801 is ideal for those who already own a Solo access pole.Product includes:
- Sensitivity tester head unit
- Control panel
- Durable storage case
- Product Code: Trutest 801-001
-
Smoke generated by Testifire is delivered via capsules. The use of capsules offers a number of benefits over traditional aerosol canisters.Key features include:
- Non-pressurised – easier to store and transport
- On-demand smoke generation – less wastage, more tests
- Smoke stimulus which is compatible with widest range of detectors
- Product Code: TS3-001
-
-
Key Features:; Solar Blind for false alarm free operation Fast response to flames Detect a 0.1m² fire at a range of 20m Automatic health check feature Discrete ultra-low profile design Fits a standard MZX detector base or functional base Integral alarm LED with 360º angle of view Use T110 infrared test source (With separate adapter); 601F-M Detector - Data Sheet
-
Solar Blind for false alarm free operation Fast response to flames Detect a 0.1m² fire at a range of 20m Automatic health check feature Discrete ultra-low profile design Fits a standard MZX detector base or functional base Integral alarm LED with 360º angle of view Use T110 infrared test source (With separate adapter)
-
-
EN54 Approved from LPCB Marine approved Low operational voltage: 10.5 Vdc to 33 Vdc Aesthetically discreet Superior performance and reliability Designed for rapid installation Integrated alarm LED Remote LED connection Wiring polarity independent; Applications used in:; kitchens, locker rooms canteens loading bays etc.
-
-
601I Ion Chamber Smoke Detector - Conventional
-
-
Key Features:; Approved by all major classification societies for use on vessels EN54 Approved from LPCB Low operational voltage: 10.5 Vdc to 33 Vdc Aesthetically discreet Superior performance and reliability Designed for rapid installation Wiring polarity independent
-
Operating Voltage 18 to 32Vdc Alarm State Current 1.2mA @ 68dBA (low vol) 6.8mA @ 90dBA (max vol) Operating Temp. -25°C to +70°C Relative Humidity 10% to 95% (non cond.) Dimensions 108 dia x 38 mm Weight 195g
-
-
-
-
-
Universal Mode - EN54 pt.7 - CEA4021 - IS07240.7 Resilient Mode - EN54 pt.7 - CEA4021- IS07240.7 High Performance Optical - EN54 pt.7 - IS07240.7 Compensated CO Fire Sensing - LPS1265 - IS07240.6 Heat Detection - EN54 pt.5 A1R - IS07240.5 CO Toxic Gas Detection- EN50291
-
-
802SB Loop Powered Sounder Base Minerva MX; Manufactuered to EN54 part 3 Integral Sounder and Detector Base Volume and tone adjustable after installation Low Power Synchronisation Does not require use of a standard base (maybe installed directly onto a standard besa box)
-
A compact and discrete solution One point of installation for detector and sounder with no addition wiring Low power with up to 250 sounders on a single loop Provides uncompromised system design solutions Simple to select the tone and volume using switches No special training or tools needed 9 selectable tones 4 selectable volumes A locking pin supplied with the base which prevents the unauthorized removal of the detector Replace legacy 802sb and it is compatible with 800 series detectors. Can be used for service and repair or as part of a planned upgrade path
-
Key Features:; Unlike UV and UV/IR detection, not blinded by oil mist in machinery spaces Reduces cabling, no interface required No additional power source required Easy installation uses a common plug in base for smoke and heat detectors Can be used on all vessels as fully marine approved
-
Unlike UV and UV/IR detection, not blinded by oil mist in machinery spaces Reduces cabling, no interface required No additional power source required Easy installation uses a common plug in base for smoke and heat detectors Can be used on all vessels as fully marine approved
-
-
Over 20 fire detection modes Tyco MX FASTLOGIC Expert algorithms MX HPO detection Algorithms Up to 250 detectors per loop Remote detector verification & temperature read out Programmable alarm LED with 360o viewing angle Optional detector locking pin Variety of sounder and relay detector bases Address flag stays with the base Approved by all major classification societies for use on vessels Lower cost system design and installation as one detection type can be used throughout the vessel Lower cost of ownership as no radioactive source disposal costs together with less spares holding Enhanced safety in accommodation areas by using the unique Carbon Monoxide (CO) detectors Major Cable saving options using loop powered ancillaries Allows easier decision making by operator because of remote temperature and smoke density read-out
-
Key Features:; Over 20 fire detection modes Tyco MX FASTLOGIC Expert algorithms MX HPO detection Algorithms Up to 250 detectors per loop Remote detector verification & temperature read out Programmable alarm LED with 360o viewing angle Optional detector locking pin Variety of sounder and relay detector bases Address flag stays with the base Approved by all major classification societies for use on vessels Lower cost system design and installation as one detection type can be used throughout the vessel Lower cost of ownership as no radioactive source disposal costs together with less spares holding Enhanced safety in accommodation areas by using the unique Carbon Monoxide (CO) detectors Major Cable saving options using loop powered ancillaries Allows easier decision making by operator because of remote temperature and smoke density read-out
-
Advanced multi-sensor designs Built-in line isolator (850H Only) Quick and easy to install Extended drift compensation Two way infra-red communication to the 850EMT Engineering Management Tool Fire, isolate and fault LED indications Any Pantone colour available with CPD approval Comprehensive range of bases and base accessories
-
Advanced multi-sensor designs Built-in line isolator (850P Only) Quick and easy to install Extended drift compensation Two way infra-red communication to the 850EMT Engineering Management Tool Fire, isolate and fault LED indications Any Pantone colour available with CPD approval
-
Advanced multi-sensor designs Built-in line isolator (850 only) Quick and easy to install Extended drift compensation Two way infra-red communication to the 850EMT Engineering Management Tool Fire, isolate and fault LED indications Any Pantone colour available with CPD approval Comprehensive range of bases and base accessories
-
Advanced multi-sensor designs Built-in line isolator (850PH Only) Quick and easy to install Extended drift compensation Two way infra-red communication to the 850EMT Engineering Management Tool Fire, isolate and fault LED indications Any Pantone colour available with CPD approval
-
Advanced multi-sensor designs Built-in line isolator (850H Only) Quick and easy to install Extended drift compensation Two way infra-red communication to the 850EMT Engineering Management Tool Fire, isolate and fault LED indications Any Pantone colour available with CPD approval Comprehensive range of bases and base accessories
-
Advanced multi-sensor designs Built-in line isolator (850P Only) Quick and easy to install Extended drift compensation Two way infra-red communication to the 850EMT Engineering Management Tool Fire, isolate and fault LED indications Any Pantone colour available with CPD approval
-
Advanced multi-sensor designs Built-in line isolator (850 only) Quick and easy to install Extended drift compensation Two way infra-red communication to the 850EMT Engineering Management Tool Fire, isolate and fault LED indications Any Pantone colour available with CPD approval Comprehensive range of bases and base accessories
-
Advanced multi-sensor designs Built-in line isolator (850PH Only) Quick and easy to install Extended drift compensation Two way infra-red communication to the 850EMT Engineering Management Tool Fire, isolate and fault LED indications Any Pantone colour available with CPD approval
-
Advanced multi-sensor designs Built-in line isolator (851PH Only) Quick and easy to install Extended drift compensation Two way infra-red communication to the 850EMT Engineering Management Tool Fire, isolate and fault LED indications Any Pantone colour available with CPD approval Comprehensive range of bases and base accessories
-
Advanced multi-sensor designs Built-in line isolator (851PH Only) Quick and easy to install Extended drift compensation Two way infra-red communication to the 850EMT Engineering Management Tool Fire, isolate and fault LED indications Any Pantone colour available with CPD approval Comprehensive range of bases and base accessories
-
Power beam detectors directly from the MX Digital loop Reduced wiring and installation costs Monitors beam detector for fire and fault Inter-connection monitored for open and short circuit faults LPCB and VdS appoved (pending) Can be installed to BS5839 Part 1 2002 On board LED indicated polling and active Use with reflective beams FIRERAY 50R or 100R for greater savings on installation Compatible with FIRERAY 2000 beam detector Optional BTM800 beam terminaltion module to further simplify installation
-
Features; Conventional I.S. system Suitable for worst case (EEx ia IIC T5) High Performance Optical (HPO) smoke detector Compatible with S231i+ flame detector Compatible I.S. callpoint Suitable for use in Zone 0,1,2,20,21& 22 Polyester Enclosure - light, strong and not subject to corrosion. Break Glass. Explosion protected EExe (ATEX Approved). In line and end of line resistors. Red. 9 x terminals. Lift flap for extra protection against inadvertent operation. 1 x changeover switch. Captive cover screws. No hammer required - the glass is covered by a membrane thus protecting the operator from glass fragments. Key operated test facility - simple but secure. 2 x M20 bottom cable entries.
-
Glass Reinforced Polyester Enclosure - light, strong and not subject to corrosion. Resettable Element. Explosion protected EExe (ATEX Approved). In line and end of line resistors. Red Epoxy Finish. 7 x terminals. Lift flap for extra protection against inadvertent operation. 1 x changeover switch. Captive cover screws. Key operated test facility - simple but secure. 1 x M20 bottom cable entry.
-
Features; Conventional I.S. system Suitable for worst case (EEx ia IIC T5) High Performance Optical (HPO) smoke detector Compatible with S231i+ flame detector Compatible I.S. callpoint Suitable for use in Zone 0,1,2,20,21& 22 Intrinsically safe Weatherproof to IP66/IP67 Robust GRP Housing; Model: BG3I 514.001.059 Intrinsically Safe Callpoint (BG3I4NBN) Protection: Explosion Protected EExia (Intrinsically Safe) Certification: CENELEC EN50014, 020 BASEEFA EExia IIC T4 Cert No. BAS00ATEX1067X Suitable for use in Zones 0,1 & 2 Voltage: Up to 28V (IS) Certified Temp: -55°C to +55°C Ingress Protection: IP66 & IP67 European Standard for Callpoints: EN54-11 Terminals: 6 X 4.0mm2 Cable Entries: 2 X M20 Bottom Weight: 0.5Kg Material: UV resistant glass reinforced polyester Finish: Natural Red GRP
-
-
