-
High Intensity LED technology Addressable via Hand Held Programmer (TCH-B100) Up to 127 devices per loop Approved by VdS -
Approved to MED by GL SIL Level 2 approved variant available Ideal for use in oil and gas environments Fast response Integral short-circuit isolator Bi-coloured status LED Non-frangible element fitted as standard (conforms to EN54) Addressed with TCH-B200 Hand Held Programmer Surface or flush mounting (if surface mounting, requires SR MOUNTING BOX – sold separately) LPCB Approved to EN54
-
Low profile - only 2” high Simple and reliable device addressing Supports 16 operational modes Automatic compensation for sensor contamination Built-in fire test feature Uses the noise-immune Digital Communication Protocol (DCP), which utilizes interrupts for fast response to fires Two built-in power/alarm LEDs Programmable non-polling LEDs Non-directional smoke chamber Vandal resistant security locking feature 10 years CO sensor life span*
-
Key Features:; EN54-23 compliant Loop powered High intensity flash Range of coverage volumes Red LEDs Colour-matched with existing sensor range
-
Key Features:; EN54-23 compliant Loop powered High intensity flash Range of coverage volumes White LEDs Colour-matched with existing sensor range
-
Key Features:; EN54-23 compliant Loop powered High intensity flash Range of coverage volumes Red LEDs Colour-matched with existing sensor range
-
Key Features:; EN54-23 compliant Loop powered High intensity flash Range of coverage volumes White LEDs Colour-matched with existing sensor range
-
Key Features:; EN54-23 compliant Loop powered High intensity flash Range of coverage volumes Red LEDs Colour-matched with existing sensor range
-
Compatible with the majority of existing Analogue and Conventional bases Colour matches standard Hochiki Analogue and Conventional sensor/detector/base ranges 4 pre-moulded knock-outs provide wiring entry Low profile - only 16mm
-
Loop Powered with Single Loop Address - addressed automatically by Control Panel or via the TCH-B200 Hand Held Programmer Variable Sound Output 50 ~ 98 dB(A) (+/-2 dB(A)) output at 1 metre 51 User-Selectable Tones (all tones EN54-3 compatible) Auto-Shutdown feature prevents noise-pollution
-
EN54-23 compliant O Rated Single Loop Address - addressed via the TCH-B100 Hand Held Programmer Variable Sound Output 50 ~ 98 dB(A) (2 dB(A)) output at 1 metre Sounder and Beacon can operate independently 0.5 or 1Hz flash frequency Fits Hochiki Standard or Isolator Base and supports ESP Sensors, Addressable Beacons and Addressable Remote Indicator 51 User-Selectable Tones (all tones EN54-3 compatible) Auto-Shutdown feature prevents noise-pollution Also available in white or black
-
EN54-23 compliant O Rated Single Loop Address - addressed via the TCH-B100 Hand Held Programmer Variable Sound Output 50 ~ 98 dB(A) (2 dB(A)) output at 1 metre Sounder and Beacon can operate independently 0.5 or 1Hz flash frequency Fits Hochiki Standard or Isolator Base and supports ESP Sensors, Addressable Beacons and Addressable Remote Indicator 51 User-Selectable Tones (all tones EN54-3 compatible) Auto-Shutdown feature prevents noise-pollution Also available in white and black
-
-
-
‘O’ rated beacon to EN54-23 Single loop address - addressed via the TCH-B200 Hand Held Programmer Variable sound output 50 ~ 98 dB(A) (±2 dB(A)) output at 1 metre Sounder and beacon can operate independently (1) 0.5 or 1Hz flash frequency Fits Hochiki standard or isolator base and supports ESP sensors, addressable beacons and addressable remote indicator 51 user-selectable tones (all tones EN54-3 compatible) Auto-shutdown feature prevents noise-pollution (1) Available with red or white LEDs Available with, ivory, white or black case
-
-
Approved to EN54-11:2001 3 position keyswitch Terminals can accommodate up to a 2.5 mm solid conductor Other colours available on request Approved by LPCB
-
Key Features:; EN54-23 compliant Loop powered High intensity flash Range of coverage diameters Red LEDs Colour-matched with existing sensor range Approved by LPCB (Certificate No 164s/09)
-
Key Features:; EN54-23 compliant Loop powered High intensity flash Range of coverage diameters Red LEDs Approved by LPCB (Certificate No 164s/05)
-
Key Features:; EN54-23 compliant Loop powered High intensity flash Range of coverage diameters Red LEDs Colour-matched with existing sensor range Approved by LPCB (Certificate No 164s/06)
-
Key Features:; EN54-23 compliant Loop powered High intensity flash 15m coverage diameter White LEDs Colour-matched with existing sensor range Approved by LPCB (Certificate No 164s/02)
-
-
features; Low standby current Highly linear thermistor circuit Twin fire LED's allow 360° viewing Electronics free mounting base Variable sensitivity Electronically Addressed Approved to EN54 Part 5
-
Key Features:; Integral remote indicator output Rugged design Dedicated cable screen terminal Quick connection via square cable clamps Accepts from 1 to 2.5 mm cables Bayonet slot, low insertion force for detectors
-
High Intensity LED technology Colour-matched to existing Ivory and White detector and base ranges Fits standard CDX base (YBN-R/6)
-
Key Features; Approved to EN54-11:2001 Terminals can accommodate up to a 2.5 mm solid conductor Other colours available on request
-
Approved to EN54-11:2001 2 position keyswitch Terminals can accommodate up to a 2.5 mm solid conductor Other colours available on request Approved by LPCB
-
Approved to EN54-11:2001 Terminals can accommodate up to a 2.5 mm solid conductor Other colours available on request Approved by LPCB
-
Approved to EN54-11:2001 Terminals can accommodate up to a 2.5 mm solid conductor Approved by LPCB
-
Approved to EN54-11:2001 Terminals can accommodate up to a 2.5 mm solid conductor Other colours available on request Approved by LPCB
-
Electronic linear heat detection Remote Indicator output Wide voltage range (9.5 ~ 30 V dc) Twin fire LEDs allow 360 degree viewing Range of mounting bases Approved by LPCB & VdS Also available in white
-
Electronic linear heat detection Incorporates a 90 degree C fixed temperature element Remote Indicator output Wide voltage range (9.5 ~ 30 V dc) Twin fire LEDs allow 360 degree viewing Full range of mounting bases Approved by LPCB & VdS Also available in white
-
Electronic linear heat detection Remote Indicator output Wide voltage range (9.5 ~ 30 V dc) Twin fire LEDs allow 360 degree viewing Fixed Temperature Detector Full range of mounting bases Approved by LPCB & VdS Also available in white
-
Electronic linear heat detection Remote Indicator output Wide voltage range (9.5 ~ 30 V dc) Twin fire LEDs allow 360 degree viewing Fixed Temperature Detector Full range of mounting bases Approved by LPCB & VdS Also available in white
-
Key Features:; Class 1 performance as defined in BS EN54-10:2002 (range up to 25 m) Single IR technology Robust and slim design Low current consumption Easy to install Fits any of the CDX Range of mounting bases Twin LEDs for 360 degree viewing Approved by LPCB & VdS; Hochiki - Flame Detector - Datasheet Hochiki - Flame Detector - Installation Instructions Hochiki - Flame Detector - Leaflet
-
Key Features:; Twin fire LEDs allow 360 degree viewing Electronics free mounting base Remote indicator output ATEX Classification to II 1G EEx ia IIC T5 Tamb=55C Suitable for installation in areas at Category 1 (inc all lower categories) Also available in white Approved by LPCB and GL SIL2 Approved variant available; Hochiki - IS Technology Guide Hochiki - Rate of Rise Detector - Specification Hochiki - Smoke Detector - Installation Guide Hochiki - Heat Detector - Datasheet Hochiki - IS Technology - Application Notes
