-
Superb sound intelligibility. Choose from two evacuation voice messages and four evacuation alarm tones (your selected evacuation message will be preceded by the selected tone). Alarm Current at 30Vdc = 10mA. Alarm Current at 18Vdc = 8mA. IP33C rated. Manufactured in the UK by C-TEC. -
Superb sound intelligibility. Choose from two evacuation voice messages and four evacuation alarm tones (your selected evacuation message will be preceded by the selected tone). Alarm Current at 30Vdc = 10mA. Alarm Current at 18Vdc = 8mA. IP21C rated. Manufactured in the UK by C-TEC.
-
Superb sound intelligibility. Choose from two evacuation voice messages and four evacuation alarm tones (your selected evacuation message will be preceded by the selected tone). Provides 'O-R-3-2.5-17' light distribution using the same lenses and electronics as our EN54-3 & 23 certified base sounder VAD. Three selectable VAD flash rates (0.5Hz, 1Hz, OFF) Alarm Current at 30Vdc = 17mA (0.5Hz) or 24mA (1Hz) Alarm Current at 18Vdc = 18.5mA (0.5Hz) or 30mA (1Hz) Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use. Supplied with a BF431QCP quick connect plate and detector spur wires. IP21C rated.
-
Provides 'W-2.75-9' rated light distribution when wall mounted (min. 0.4 lux over a 2.75 x 9m cuboid area). Can also be used as a W-4-4 VAD. Superb sound intelligibility. Choose from two evacuation voice messages and four evacuation alarm tones (your selected evacuation message will be preceded by the selected tone). Three selectable VAD flash rates (0.5Hz, 1Hz, OFF) Alarm Current at 30Vdc = 17mA (0.5Hz) or 24mA (1Hz) Alarm Current at 18Vdc = 18.5mA (0.5Hz) or 30mA (1Hz) IP55C rated (weatherproof) Manufactured in the UK by C-TEC.
-
Superb sound intelligibility. Choose from two evacuation voice messages and four evacuation alarm tones (your selected evacuation message will be preceded by the selected tone). Alarm Current at 30Vdc = 10mA. Alarm Current at 18Vdc = 8mA. IP55C rated (weatherproof). Manufactured in the UK by C-TEC.
-
Superb sound intelligibility. Choose from two evacuation voice messages and four evacuation alarm tones (your selected evacuation message will be preceded by the selected tone). Provides 'C-3-8.5' light distribution using the same lenses and electronics as our EN54-3 & 23 certified base sounder VAD. Three selectable VAD flash rates (0.5Hz, 1Hz, OFF) Alarm Current at 30Vdc = 17mA (0.5Hz) or 24mA (1Hz) Alarm Current at 18Vdc = 18.5mA (0.5Hz) or 30mA (1Hz) Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use. Supplied with a BF431QCP quick connect plate and detector spur wires. IP21C rated.
-
-
-
-
Provides 3A at 13.8V.d.c. Anti-tamper facility. Space available for a 12V 7AHr sealed lead acid back-up battery. Four LED indicators - Mains On, Standby On, Battery Fault and Output Fault.
-
-
-
-
Comprises 2 x 12V rechargeable batteries and a link wire. Each battery measures 97 W x 50 H x 43 D mm. Quick connect 4.75mm 'Faston' type terminals.
-
-
Comprises 2 x 12V rechargeable batteries and a link wire. Each battery measures 178 W x 66H x 35 D mm. Quick connect 4.75mm 'Faston' type terminals.
-
Key Features; A powerful switch mode/digital hybrid PSU that can be customised to suit your exact requirements. Plastic cover on PSU PCB guards against touching live parts (to VDE 0100-410). Includes the same electronics as our BF560-24 LPCB certified EN54-4/A2 boxed 24V 1.5A PSU. Metal base plate facilitates straightforward mounting inside third-party OEM enclosures. Includes a single-pole volt-free changeover relay that switches for any fault condition. Includes a fault type & hazardous voltages present LED. Two selectable battery charge currents. Battery fault impedance limits can be optimised to suit load current (helps extend battery life). Mains fail simulation mode. Improved on-board temperature sensor with optional remote sensor. Electronic functions comply with EN50131-6 grades 1-4 for security applications. Optional PCB-only version (without a metal base plate) available.
-
Comprises 2 x 12V rechargeable batteries and a link wire. Each battery measures 135 W x 67 H x 67 D mm. Quick connect 4.75mm 'Faston' type terminals.
-
-
VDS certified to EN54-4 (1997/A2:2006). Ideal for powering beam detectors, auto-dial communicators, aspirating smoke detectors, auto-open vent systems, auxiliary sounder systems or any other device performing a mandatory function of a fire alarm system. Deep discharge battery protection and EN54 compliant reporting of battery impedance faults. Includes a single-pole volt-free changeover relay that switches for any fault condition. Three LED indicators - supply present, general fault and auxiliary fault (for optional connection to third-party equipment). Link selectable battery charging capacity. Environmentally-friendly charging circuit - dissipates just 0.35W compared to the industry norm of 2.55W. Supplied in a tough, durable metal box. Optional 'caged' and 'PCB-only' versions available with exactly the same electronics (order code BF362-3/E and BF362-3/C respectively).
-
Key Features; C-Tec BF562-5 24vdc 5A max Nominal 4Ah continuous EN54-4 Compliant Power Supply Unit Max battery 2 x 18Ah Battery charge capacity 7Ah to 18Ah Fault relay output Dimensions 404w x 404h x 110d
-
-
-
Compatible with C-TEC’s entire range of ActiV fire detectors. Includes a 1A @ 24 VDC relay controlled by detector’s remote LED output. Ideal for switching CCTV, security and door retaining systems. Third-party certified to the relevant parts of EN54 in conjunction with our ActiV detectors. Easy to fit with lots of working space. Can be ceiling mounted in any orientation due to the true 360° degree viewing angle of the LED indicator strips on all ActiV detectors. Integrated detector/base locking mechanism, head removal tool and ID tag. Simple ‘click and twist’ design. Remote LED terminals for the optional connection to a BF318 Remote indicator. C4408R non-diode relay base also available for use on systems that do not require head out monitoring.
