-
Product Description 541NCSXTE Edwards Signaling 500 Series 4-Wire Smoke Detector (White) 12/24VDC operating voltage Features heat sensor, sounder, and end of line relay. -
Product Description Edwards 047327-0242-X1 Replacement Board
-
Product Description Edwards EST 125STRNR1248D is a Strobe Beacon Light, flash rate 65 fpm 12 - 48 Volt DC, 0.350 Amp, Red with Gray base
-
Product Description Edwards 130336P
-
Product Description Edwards EST 140279 ADMM Annunciator Driver Master Module
-
Product Description Edwards Signaling 1500-1 Door Holder Extension Rods are for use where it is desired to hold doors open and where a standoff distance between the magnet assembly and the armature base is required. The extension kit can be used with Edwards 1504, 1505, 1508 and 1509 series door holders. 1.5" Extension
-
Product Description Edwards EST 1501-AQ Electromagnetic Door Holder
-
Product Description The Edwards EST 1501-AQN5 is an Electromagnetic Door Holder for single doors. For floor mounting. 24V AC/DC, 120VAC operation
-
Product Description The Edwards EST 1501-G1 is an Electromagnetic Single-door Holder 24V AC/DC; 120V AC
-
Product Description Edwards 1504-AQN5 Electromagnetic Door Holder 24VAC 60 Hz Flush Wall Mounted (Long Catch Plate)
-
-
Product Description The Edwards EST 1508-AQN5 is a Magnetic Door Holder for surface mounting. Holding Force: 25 to 50 lb. Power Required: 0.15A @ 120VAC, 0.15A @ 24VAC/DC Mounting hardware included. OPTIONAL ACCESSORIES — 1500-1 Catch plate extension assembly, 1.5" — 1500-2 Catch plate extension assembly, 2.5" — 1500-7 Catch plate extension assembly, 5.25"-7.5" — 1500-12 Catch plate extension assembly, 7.5"-12"
-
Product Description The Edwards EST 1508-AQN5 is a Magnetic Door Holder for surface mounting. Holding Force: 25 to 50 lb. Power Required: 0.15A @ 120VAC, 0.15A @ 24VAC/DC Mounting hardware included. OPTIONAL ACCESSORIES — 1500-1 Catch plate extension assembly, 1.5" — 1500-2 Catch plate extension assembly, 2.5" — 1500-7 Catch plate extension assembly, 5.25"-7.5" — 1500-12 Catch plate extension assembly, 7.5"-12"
-
Product Description The Edwards EST 1508-AQN5 is a Magnetic Door Holder for surface mounting. Holding Force: 25 to 50 lb. Power Required: 0.15A @ 120VAC, 0.15A @ 24VAC/DC Mounting hardware included. OPTIONAL ACCESSORIES — 1500-1 Catch plate extension assembly, 1.5" — 1500-2 Catch plate extension assembly, 2.5" — 1500-7 Catch plate extension assembly, 5.25"-7.5" — 1500-12 Catch plate extension assembly, 7.5"-12"
-
Product Description Edwards EST 1534-1 Key-operated Fire Alarm Station is fitted with a key-operated switch of which the key is not easily duplicated. Stations use spanner head screws for mounting to the backbox. The 1534-1 has one Single Pole Normally Open contact rated for 1 amp at 24 Vdc. Features a 6-inch (150mm) wire leads for easy field wiring. They key can be removed in both the “ON” and “OFF” positions. Flush mounts to any standard North American 1-gang electrical box 2-1/2 inch (63mm) deep minimum, or surface mounts to Edwards 46292- 0200 Surface Mount Backbox.
-
Product Description The Edwards EST 2-CPU is a command point for remote annunciators in the EST2 network, and acts as the primary interface between the network and remote annunciators.
-
Product Description Edwards EST 2-LCD Fire Alarm Display
-
Product Description Edwards EST 2-LCD Fire Alarm Display Module
-
Product Description The Edwards EST 2-LCX Expander Loop Module is intended for use with the EST2 Fire Alarm Control Panel. Features 2 NCA (Notification Appliance Circuits) and 2 SDC (Signature Data Circuits). Requires programming.
-
Product Description The Edwards EST 2-LCX is the Signature Loop Card for the EST2 intelligent FACP.
-
Product Description The Edwards EST 2-PPS is the Primary Power Supply Module for use with the EST 2 Fire Alarm Control Panel.
-
Product Description Edwards EST 2-PPS/6A Primary Power Supply Module [NEW]
-
Product Description Edwards EST 202-75PSW PowerSaver Synchronized Strobe operates on any existing 2-wire signal circuit. Operating voltage 20 to 31VDC. 75 candela, white. COMPATIBLE— 27193-16 Surface box, single gang, indoor
-
Product Description Edwards EST 202-7A-T Strobe
-
Product Description Edwards EST 202-7A-TW (white) Strobe 15/75 candela
-
Product Description Edwards EST 202-8A-T Strobe
-
-
Product Description NOTE: This part is discontinued by the manufacturer. Edwards EST 2251FB Smoke Detector
-
Product Description Edwards EST 2251TFB Smoke Heat Combo Detector
-
Product Description This is the Replacement Board, Power Supply and Dress Plate for the Edwards 2400 2-Zone Fire Alarm Control Panel. Installer programmable microprocessor technology.
-
Product Description Edwards EST 46213-2103 Power Board for EST 2400 / EST 1
-
-
Product Description Edwards 130279P 2400 is the annunciator driver module for the ESL 2400 Fire Alarm Control Panel.
-
Product Description The Edwards 46213-2104 is intended for use with the 2400 Series of fire alarm control panels.
-
Product Description Edwards 2400 Main Board 46213-2102 Controller Assembly is the Replacement Board for the EST 1
-
Product Description The Edwards 46213-2114 Zone Card provides two additional detection zones to the Edwards 2400 fire alarm control panel.
