-
Product Description The EST APS4-B is the Auxiliary Power Supply for the IRC-3 FACP. -
Product Description NOTE: This part is discontinued by the manufacturer. Replace with SIGA-PD. Edwards EST SIGA2-PS Intelligent Photoelectric Smoke Detectors are only for use with Signature Loop Controller. COMPATIBLE BASES and ACCESSORIES: — SIGA-SB Detector Mounting Base - Standard — SIGA-SB4 4-inch Detector Mounting Base w/ SIGA-TS4 Trim Skirt — SIGA-RB Detector Mounting Base w/Relay — SIGA-RB4 4-inch Detector Mounting Base w/Relay w/ SIGA-TS4 Trim Skirt — SIGA-IB Detector Mounting Base w/Fault Isolator — SIGA-IB4 4-inch Detector Mounting Base w/ Fault Isolator and SIGA-TS4 Trim Skirt — SIGA-LED Remote Alarm LED. (Connects to the SIGA-SB or SIGA-SB4 Standard Base only.) — SIGA-AB4G Audible (Sounder) Base for Fire Detectors — SIGA-AB4GT Audible (Sounder) Base for CO and Fire Detectors — SIGA-TCDR Temporal Pattern Generator — SIGA-CRR Polarity Reversal Relay can be used for sounding to other audible bases on the same 24 Vdc circuit. — SIGA-TS4 Trim Skirt (supplied with 4-inch bases) — SIGA-DMP Detector Mounting Plate — SIGA-RTA Detector Removal Tool — SIGA-VA Detector Cleaning Tool
-
Product Description The Edwards TSD-SJ-C01 is a SuperDuct Four-Wire Duct Smoke Detector with RJ-45 modular connector. Includes carbon monoxide (CO1) sensor.module COMPATIBLE ACCESSORIES: — SD-T8 8-inch sampling tube — SD-T18 18-inch sampling tube — SD-T24 24-inch sampling tube — SD-T36 36-inch sampling tube — SD-T42 42-inch sampling tube — SD-T60 60-inch sampling tube — SD-T78 78-inch sampling tube — SD-T120 120-inch sampling tube — SD-RJ5 RJ-45 wiring harness kit, 5.0 ft — SD-RJ10 RJ-45 wiring harness kit, 10.0 ft — SD-RJ15 RJ-45 wiring harness kit, 15.0 ft — SD-RJ20 RJ-45 wiring harness kit, 20.0 ft. — SD-TRM4 Remote test-reset station, magnetic — SD-TRK4 Remote test-reset station, keyed — SD-MAG Test magnet kit — SD-TMP Sampling tube mounting plate — SD-VTK Air velocity test kit — SD-GSK Cover gasket kit
-
Product Description NOTE: This part is discontinued by the manufacturer. Replace with: SIGA-PCD The Edwards EST Signature Series SIGA2-PCOS Intelligent Photoelectric Detector with carbon monoxide sensor is compatible for use with the Signature Loop Controller. COMPATIBLE BASES and ACCESSORIES: — SIGA-SB Detector Mounting Base - Standard — SIGA-SB4 4-inch Detector Mounting Base w/ SIGA-TS4 Trim Skirt — SIGA-RB Detector Mounting Base w/Relay — SIGA-RB4 4-inch Detector Mounting Base w/Relay w/ SIGA-TS4 Trim Skirt — SIGA-IB Detector Mounting Base w/Fault Isolator — SIGA-IB4 4-inch Detector Mounting Base w/ Fault Isolator and SIGA-TS4 Trim Skirt — SIGA-LED Remote Alarm LED. (Connects to the SIGA-SB or SIGA-SB4 Standard Base only.) — SIGA-AB4G Audible (Sounder) Base for Fire Detectors — SIGA-AB4GT Audible (Sounder) Base for CO and Fire Detectors — SIGA-TCDR Temporal Pattern Generator — SIGA-CRR Polarity Reversal Relay can be used for sounding to other audible bases on the same 24 Vdc circuit. — SIGA-TS4 Trim Skirt (supplied with 4-inch bases) — SIGA-DMP Detector Mounting Plate — SIGA-RTA Detector Removal Tool — SIGA-VA Detector Cleaning Tool — 2-SPRC2 Replacement Smoke Chamber — 2-CORPL Replacement CO Sensor
-
Product Description NOTE: This part is discontinued by the manufacturer. Replace with: SIGA-PHD. Edwards EST SIGA-PHS Intelligent 3D Multisensor Detector is a combination Photoelectric Smoke and Fixed-Temperature Heat Detector, compatible only with EST’s Signature Loop Controller. COMPATIBLE BASES and ACCESSORIES: — SIGA-SB Detector Mounting Base - Standard — SIGA-SB4 4-inch Detector Mounting Base w/ SIGA-TS4 Trim Skirt — SIGA-RB Detector Mounting Base w/Relay — SIGA-RB4 4-inch Detector Mounting Base w/Relay w/ SIGA-TS4 Trim Skirt — SIGA-IB Detector Mounting Base w/Fault Isolator — SIGA-IB4 4-inch Detector Mounting Base w/ Fault Isolator and SIGA-TS4 Trim Skirt — SIGA-LED Remote Alarm LED. (Connects to the SIGA-SB or SIGA-SB4 Standard Base only.) — SIGA-AB4G Audible (Sounder) Base for Fire Detectors — SIGA-AB4GT Audible (Sounder) Base for CO and Fire Detectors — SIGA-TCDR Temporal Pattern Generator — SIGA-CRR Polarity Reversal Relay can be used for sounding to other audible bases on the same 24 Vdc circuit. — SIGA-TS4 Trim Skirt (supplied with 4-inch bases) — SIGA-DMP Detector Mounting Plate — SIGA-RTA Detector Removal Tool — SIGA-VA Detector Cleaning Tool NOTE: This part replaces SIGA2-PHS for applications that do not require split photo/heat operation.
-
Product Description NOTE: This part is discontinued by the manufacturer. Replace with: SIGA-PD The Edwards EST SIGA-PS Intelligent Photoelectric Smoke Detectors is part of the Signature Series Detection and Alarm equipment from Edwards / EST. The Edwards EST SIGA-PS is compatible for use only with EST’s Signature Loop Controller. Uses one Device Address. COMPATIBLE BASES and ACCESSORIES: — SIGA-SB Detector Mounting Base - Standard — SIGA-SB4 4-inch Detector Mounting Base w/ SIGA-TS4 Trim Skirt — SIGA-RB Detector Mounting Base w/Relay — SIGA-RB4 4-inch Detector Mounting Base w/Relay w/ SIGA-TS4 Trim Skirt — SIGA-IB Detector Mounting Base w/Fault Isolator — SIGA-IB4 4-inch Detector Mounting Base w/ Fault Isolator and SIGA-TS4 Trim Skirt — SIGA-LED Remote Alarm LED. (Connects to the SIGA-SB or SIGA-SB4 Standard Base only.) — SIGA-AB4G Audible (Sounder) Base for Fire Detectors — SIGA-AB4GT Audible (Sounder) Base for CO and Fire Detectors — SIGA-TCDR Temporal Pattern Generator — SIGA-CRR Polarity Reversal Relay can be used for sounding to other audible bases on the same 24 Vdc circuit. — SIGA-TS4 Trim Skirt (supplied with 4-inch bases) — SIGA-DMP Detector Mounting Plate — SIGA-RTA Detector Removal Tool — SIGA-VA Detector Cleaning Tool
-
Product Description NOTE: This part is discontinued by the manufacturer. The EST SIGA-IPHS Intelligent 4D Multisensor Detector is a combination Ionization, Photoelectric, and Thermal Boost Type Smoke Detector. EST SIGA-IPHS detectors are compatible only with Signature Loop Controller. COMPATIBLE BASES and ACCESSORIES: — SIGA-SB Detector Mounting Base - Standard — SIGA-SB4 4-inch Detector Mounting Base w/ SIGA-TS4 Trim Skirt — SIGA-RB Detector Mounting Base w/Relay — SIGA-RB4 4-inch Detector Mounting Base w/Relay w/ SIGA-TS4 Trim Skirt — SIGA-IB Detector Mounting Base w/Fault Isolator — SIGA-IB4 4-inch Detector Mounting Base w/ Fault Isolator and SIGA-TS4 Trim Skirt — SIGA-LED Remote Alarm LED. (Connects to the SIGA-SB or SIGA-SB4 Standard Base only.) — SIGA-AB4G Audible (Sounder) Base for Fire Detectors — SIGA-AB4GT Audible (Sounder) Base for CO and Fire Detectors — SIGA-TCDR Temporal Pattern Generator — SIGA-CRR Polarity Reversal Relay can be used for sounding to other audible bases on the same 24 Vdc circuit. — SIGA-TS4 Trim Skirt (supplied with 4-inch bases) — SIGA-DMP Detector Mounting Plate — SIGA-RTA Detector Removal Tool — SIGA-VA Detector Cleaning Tool
-
Product Description Edwards EST SIGA-DG Detector Guard
-
Product Description NOTE: This part is discontinued by the manufacturer. Replace with: SIGA-HRD The Edwards EST SIGA-HRS Heat Detector is a combination 15°F per minute Rate-of-Rise, and 135°F (57°C) Fixed-Temperature Heat Detector. Edwards EST SIGA-HRS detectors are compatible only with Signature Loop Controller. COMPATIBLE BASES and ACCESSORIES: — SIGA-SB Detector Mounting Base - Standard — SIGA-SB4 4-inch Detector Mounting Base w/ SIGA-TS4 Trim Skirt — SIGA-RB Detector Mounting Base w/Relay — SIGA-RB4 4-inch Detector Mounting Base w/Relay w/ SIGA-TS4 Trim Skirt — SIGA-IB Detector Mounting Base w/Fault Isolator — SIGA-IB4 4-inch Detector Mounting Base w/ Fault Isolator and SIGA-TS4 Trim Skirt — SIGA-LED Remote Alarm LED. (Connects to the SIGA-SB or SIGA-SB4 Standard Base only.) — SIGA-AB4G Audible (Sounder) Base for Fire Detectors — SIGA-AB4GT Audible (Sounder) Base for CO and Fire Detectors — SIGA-TCDR Temporal Pattern Generator — SIGA-CRR Polarity Reversal Relay can be used for sounding to other audible bases on the same 24 Vdc circuit. — SIGA-TS4 Trim Skirt (supplied with 4-inch bases) — SIGA-DMP Detector Mounting Plate — SIGA-RTA Detector Removal Tool — SIGA-VA Detector Cleaning Tool NOTE: This part replaces SIGA2-HRS and SIGA-HRD.
-
Product Description The Edwards EST SA-TCS-6 Portable Handset Storage Cabinet is designed for surface mounting; includes keylock. Red finish with white lettering: “Emergency Telephone Handsets”
-
Product Description The Edwards EST (R)QSC-CPU-2 QuickStart Annunciator Conventional CPU/Display is designed for use with QuickStart FACPs. Two annunciator option spaces.
-
Product Description The Edwards EST RQSC-CPU-1 Annunciator is designed for use with QuickStart FACPs.
