-
Product Description Edwards EST SIGA-CC2 Dual Input Signal Module -
Product Description The Control Relay Module Model EST SIGA-CR, is a component of the Signature Series System. The SIGA-CR is an addressable device used to provide one Form "C" dry relay contact to control external appliances (door closers, fans, dampers, etc.) or equipment shutdown. The Edwards EST SIGA-CR requires the Signature Loop Controller. Can be mounted in a North American 2-1/2" (64 mm) deep 1-gang box, or standard 4" square 1-1/2" (38 mm) deep box with 1-gang cover.
-
Product Description Edwards EST SIGA-CRR Polarity Reversal Relay Module is an addressable device that is used to power and activate the audible sounder in Signature audible detector bases. The module can support a 2A load of bases. Upon command from the loop controller, the SIGA-CRR module relay transfers, reversing the polarity of its 24VDC output.
-
Product Description Edwards EST SIGA-CT1 Single Input Module is an intelligent analog addressable device used to connect a Class B normally-open Alarm, Supervisory, or Monitor type dry contact Initiating Device Circuit (IDC); uses one module address Designed for use with Signature Loop Controller only. Mounts to standard single gang electrical boxes.
-
Product Description The Edwards EST SIGA-CT2 Dual Input Module is an intelligent analog addressable device used to connect one or two Class B normally-open Alarm, Supervisory, or Monitor type dry contact Initiating Device Circuits (IDC). For use exclusively with Edwards / EST’s Signature Loop Controller.
-
Product Description Edwards EST SIGA-DG Detector Guard
-
Product Description The Edwards EST SIGA-DH Duct Detector Housing is specially designed exploit all the capabilities of Signature Series intelligent photoelectric and multisensor smoke detectors. Five one-gang knockouts on the 16 gauge steel housing provide a location for mounting intelligent Signature Series modules. The Edwards EST SIGA-DH Duct Housing comes with a 6 inch (150 mm) exhaust tube. Air sampling tubes are available in lengths from 8 inches (200 mm) to 10 feet (3048 mm) and must be ordered separately.
-
Product Description The SIGA-DTS Duct Test Station uses a key switch along with an integral intelligent input module mounted on a two-gang plastic plate. It is supplied with two keys and features a red alarm LED. When the key is turned to the “TEST” position, the LED lights and the integral module remotely inputs a duct detector test alarm. The Duct Test Station mounts to standard 2-inch deep North American two-gang and 4-inch square electrical boxes and European 100 mm square boxes.
-
Product Description The Edwards EST SIGA-HDT Signature Handheld Diagnostic Tool is designed to help users locate and resolve issues during installation or on an existing system. The tool can be used to initialize a Signature loop before connecting to a control panel or it can be used for diagnosis of an existing loop. The SIGA-HDT is shipped with the Signature Diagnostic Tool Software (p/n 7350894) which is compatible with Windows 7 and 10 Operating systems.
-
Product Description The Edwards EST SIGA-HFD Intelligent Fixed Temp Heat Detector is designed for use with the Signature Loop Controller. COMPATIBLE BASES and ACCESSORIES: — SIGA-SB Detector Mounting Base - Standard — SIGA-SB4 4-inch Detector Mounting Base w/ SIGA-TS4 Trim Skirt — SIGA-RB Detector Mounting Base w/Relay — SIGA-RB4 4-inch Detector Mounting Base w/Relay w/ SIGA-TS4 Trim Skirt — SIGA-IB Detector Mounting Base w/Fault Isolator — SIGA-IB4 4-inch Detector Mounting Base w/ Fault Isolator and SIGA-TS4 Trim Skirt — SIGA-LED Remote Alarm LED. (Connects to the SIGA-SB or SIGA-SB4 Standard Base only.) — SIGA-AB4G Audible (Sounder) Base for Fire Detectors — SIGA-AB4GT Audible (Sounder) Base for CO and Fire Detectors — SIGA-TCDR Temporal Pattern Generator — SIGA-CRR Polarity Reversal Relay can be used for sounding to other audible bases on the same 24 Vdc circuit. — SIGA-TS4 Trim Skirt (supplied with 4-inch bases) — SIGA-DMP Detector Mounting Plate — SIGA-RTA Detector Removal Tool — SIGA-VA Detector Cleaning Tool
-
Product Description NOTE: This part is discontinued by the manufacturer. Replace with: SIGA-HFD Edwards EST SIGA-HFS Fixed Temp Heat Detector is an intelligent addressable device featuring a microprocessor which minimizes false alarms. Compatible only for use with Edwards EST Security’s Signature Loop Controller. COMPATIBLE BASES and ACCESSORIES: — SIGA-SB Detector Mounting Base - Standard — SIGA-SB4 4-inch Detector Mounting Base w/ SIGA-TS4 Trim Skirt — SIGA-RB Detector Mounting Base w/Relay — SIGA-RB4 4-inch Detector Mounting Base w/Relay w/ SIGA-TS4 Trim Skirt — SIGA-IB Detector Mounting Base w/Fault Isolator — SIGA-IB4 4-inch Detector Mounting Base w/ Fault Isolator and SIGA-TS4 Trim Skirt — SIGA-LED Remote Alarm LED. (Connects to the SIGA-SB or SIGA-SB4 Standard Base only.) — SIGA-AB4G Audible (Sounder) Base for Fire Detectors — SIGA-AB4GT Audible (Sounder) Base for CO and Fire Detectors — SIGA-TCDR Temporal Pattern Generator — SIGA-CRR Polarity Reversal Relay can be used for sounding to other audible bases on the same 24 Vdc circuit. — SIGA-TS4 Trim Skirt (supplied with 4-inch bases) — SIGA-DMP Detector Mounting Plate — SIGA-RTA Detector Removal Tool — SIGA-VA Detector Cleaning Tool
-
Product Description Edwards EST SIGA-HRD Fixed Temp / RoR Heat Detector is designed for use with the Signature Loop Controller. COMPATIBLE BASES and ACCESSORIES: — SIGA-SB Detector Mounting Base - Standard — SIGA-SB4 4-inch Detector Mounting Base w/ SIGA-TS4 Trim Skirt — SIGA-RB Detector Mounting Base w/Relay — SIGA-RB4 4-inch Detector Mounting Base w/Relay w/ SIGA-TS4 Trim Skirt — SIGA-IB Detector Mounting Base w/Fault Isolator — SIGA-IB4 4-inch Detector Mounting Base w/ Fault Isolator and SIGA-TS4 Trim Skirt — SIGA-LED Remote Alarm LED. (Connects to the SIGA-SB or SIGA-SB4 Standard Base only.) — SIGA-AB4G Audible (Sounder) Base for Fire Detectors — SIGA-AB4GT Audible (Sounder) Base for CO and Fire Detectors — SIGA-TCDR Temporal Pattern Generator — SIGA-CRR Polarity Reversal Relay can be used for sounding to other audible bases on the same 24 Vdc circuit. — SIGA-TS4 Trim Skirt (supplied with 4-inch bases) — SIGA-DMP Detector Mounting Plate — SIGA-RTA Detector Removal Tool — SIGA-VA Detector Cleaning Tool NOTE: Replaces SIGA-HFS & SIGA-HRS
