-
Key Features:; Removable, High Performance chamber Twin LEDs allow 360 viewing – green when polling, turn red in fire Locking mechanism (sensor to base) Variable sensitivity Electronically addressed Pulsing/non-pulsing controlled from panel Approved by LPCB & VdS SIL Level 2 approved variants available Available in white; Enhanced Performance Chamber New Outer Cover Design Software Advances Increase Noise Immunity Fully backwards compatible -
-
-
Low profile - only 2” high Simple and reliable device addressing Supports 16 operational modes Automatic compensation for sensor contamination Built-in fire test feature Uses the noise-immune Digital Communication Protocol (DCP), which utilizes interrupts for fast response to fires Two built-in power/alarm LEDs Programmable non-polling LEDs Non-directional smoke chamber Vandal resistant security locking feature 10 years CO sensor life span*
-
-
-
User selectable modes Incorporates Fixed Temperature and Rate of Rise Heat elements Twin fire LEDs allow 360-degree viewing Pulsing/non-pulsing controlled from panel Electronically addressed LPCB & VdS approved to Classes A, B & C
-
User selectable modes Incorporates Fixed Temperature and Rate Of Rise Heat elements Twin LEDs allow 360 viewing – green when polling, turn red in fire Pulsing/non-pulsing controlled from panel Electronically addressed LPCB & VdS approved to Classes A1, B & C SIL Level 2 approved variants available Available in white; Improvements:; New Outer Cover Design featuring indicative sensor type markings Software Advances Increased Noise Immunity Fully backwards compatible
-
Key Features:; User selectable modes Incorporates Optical & Heat elements Removable, High Performance Chamber Twin LEDs allow 360 viewing – green when polling, turn red in fire Pulsing/non-pulsing controlled from panel Variable sensitivity Electronically Addressed LPCB & VdS approved to classes A1 & C SIL Level 2 approved variants available Available in white; Enhanced Performance Chamber New Outer Cover Design featuring indicative sensor type markings Software Advanced Increase Noise Immunity Fully backwards compatible
-
User selectable modes Incorporates Fixed Temperature and Rate of Rise Heat elements Twin LEDs allow 360 degree viewing - green when polling, turn red in fire Pulsing/non-pulsing controlled from panel Electronically addressed LPCB & VdS approved to Classes A, B & C SIL Level 2 approved variants available
-
Removable, High Performance chamber Twin LEDs allow 360 viewing - green when polling, turn red in fire Locking mechanism (sensor to base) Variable sensitivity Electronically addressed Pulsing/non-pulsing controlled from panel Approved by LPCB & Vds SIL Level 2 approved varients available
-
User selectable modes Incorporates Optical & Heat elements Removable, High Performance Chamber Twin LEDs allow 360 degree viewing - green when polling, turn red in fire Pulsing/non-pulsing controlled from panel Variable sensitivity Electronically Addressed LPCB & VdS approved to Classes A1 & C SIL Level 2 approved variants available
-
Removable, High Performance Chamber Twin fire LED's allow 360° viewing Electronics-free mounting base Variable sensitivity Electronically Addressed Approved to EN54 Part 7
-
features; Low standby current Highly linear thermistor circuit Twin fire LED's allow 360° viewing Electronics free mounting base Variable sensitivity Electronically Addressed Approved to EN54 Part 5
-
Incorporates Optical & Heat elements Removable, High Performance Chamber Twin fire LED's allow 360° viewing Polling LED's controlled from Panel Variable sensitivity Electronically Addressed Approved to EN54 Part 5 & 7
-
User selectable modes Incorporates Fixed Temperature and Rate Of Rise Heat elements Twin fire LED's allow 360° viewing Pulsing/non-pulsing controlled from panel Electronically Addressed IP Rated to IP67
-
Fast response Integral short-circuit isolator Bi-coloured status LED Non-frangible element fitted as standard (conforms to EN54) Addressed with TCH-B100 Hand Held Programmer Surface or flush mounting (if surface mounting, requires SR MOUNTING BOX, sold separately) Different colour options available LPCB Approved to EN54
-
Key Features:; Fast response Integral short-circuit isolator Bi-coloured status LED Non-frangible element fitted as standard (conforms to EN54) Addressed with TCH-B100 Hand Held Programmer Surface mounted IP67 rated LPCB approved to EN54
-
Terminals can accommodate up to a 2.5 mm solid conductor Orange casing Features an integral SCI Approved by LPCB to EN54-11:2001
-
Fast response Status LED Non-frangible element fitted as standard (conforms to EN54) Addressed with TCH-B200 Hand Held Programmer Surface mounted Approved by LPCB IP67 rated
-
Fast response Status LED Non-frangible element fitted as standard (conforms to EN54) Addressed with TCH-B100 Hand Held Programmer Surface or flush mounting (if surface mounting, requires SR MOUNTING BOX, sold separately) LPCB Approved to EN54
-
High intensity LED technology Single Loop Address - addressed via the TCH-B100 Hand Held Programmer Up to 127 devices on one loop Approved by VdS
-
High Intensity LED technology 1Hz flash frequency Addressable via Hand Held Programmer (TCH-B100) Up to 127 devices per loop Low current consumption Available in 3 lens colours Approved by VdS
-
Key Features:; EN54-23 compliant Loop powered High intensity flash Range of coverage volumes White LEDs Colour-matched with existing sensor range
-
High Intensity LED technology Addressable via Hand Held Programmer (TCH-B100) Up to 127 devices per loop Approved by VdS
-
Key Features:; EN54-23 compliant Loop powered High intensity flash Range of coverage volumes Red LEDs Colour-matched with existing sensor range
-
Key Features:; EN54-23 compliant Loop powered High intensity flash Range of coverage volumes White LEDs Colour-matched with existing sensor range
-
Key Features:; EN54-23 compliant Loop powered High intensity flash Range of coverage volumes Red LEDs Colour-matched with existing sensor range
-
Key Features:; EN54-23 compliant Loop powered High intensity flash Range of coverage volumes White LEDs Colour-matched with existing sensor range
-
Key Features:; EN54-23 compliant Loop powered High intensity flash Range of coverage volumes Red LEDs Colour-matched with existing sensor range
-
Loop Powered with Single Loop Address - addressed automatically by Control Panel or via the TCH-B200 Hand Held Programmer Variable Sound Output 50 ~ 98 dB(A) (+/-2 dB(A)) output at 1 metre 51 User-Selectable Tones (all tones EN54-3 compatible) Auto-Shutdown feature prevents noise-pollution
-
EN54-23 compliant O Rated Single Loop Address - addressed via the TCH-B100 Hand Held Programmer Variable Sound Output 50 ~ 98 dB(A) (2 dB(A)) output at 1 metre Sounder and Beacon can operate independently 0.5 or 1Hz flash frequency Fits Hochiki Standard or Isolator Base and supports ESP Sensors, Addressable Beacons and Addressable Remote Indicator 51 User-Selectable Tones (all tones EN54-3 compatible) Auto-Shutdown feature prevents noise-pollution Also available in white or black
-
EN54-23 compliant O Rated Single Loop Address - addressed via the TCH-B100 Hand Held Programmer Variable Sound Output 50 ~ 98 dB(A) (2 dB(A)) output at 1 metre Sounder and Beacon can operate independently 0.5 or 1Hz flash frequency Fits Hochiki Standard or Isolator Base and supports ESP Sensors, Addressable Beacons and Addressable Remote Indicator 51 User-Selectable Tones (all tones EN54-3 compatible) Auto-Shutdown feature prevents noise-pollution Also available in white and black
-
‘O’ rated beacon to EN54-23 Single loop address - addressed via the TCH-B200 Hand Held Programmer Variable sound output 50 ~ 98 dB(A) (±2 dB(A)) output at 1 metre Sounder and beacon can operate independently (1) 0.5 or 1Hz flash frequency Fits Hochiki standard or isolator base and supports ESP sensors, addressable beacons and addressable remote indicator 51 user-selectable tones (all tones EN54-3 compatible) Auto-shutdown feature prevents noise-pollution (1) Available with red or white LEDs Available with, ivory, white or black case
-
Key Features:; EN54-23 compliant Loop powered High intensity flash Range of coverage diameters Red LEDs Colour-matched with existing sensor range Approved by LPCB (Certificate No 164s/09)
-
Key Features:; EN54-23 compliant Loop powered High intensity flash Range of coverage diameters Red LEDs Approved by LPCB (Certificate No 164s/05)
