-
Where the IAS is fitted with two point detectors, insert two baffles. Where the IAS is fitted with a single point detector, insert a blanking baffle. -
-
1. Remove the transparent cover using the corner stud key. 2. Lift out the foam filter element from the filter tube using tweezers or long nosed pliers. 3. Fit a new filter element. Ensure that the filter is not compressed during fitting and that it is positioned flush with the top of the filter tube. 4. Replace the transparent cover.
-
1. Remove the transparent cover using the corner stud key. 2. Lift out the foam filter element from the filter tube using tweezers or long nosed pliers. 3. Fit a new filter element. Ensure that the filter is not compressed during fitting and that it is positioned flush with the top of the filter tube. 4. Replace the transparent cover.
-
Suitable for all Xtralis Aspirating Smoke Detectors Improved detector longevity in applications with high levels of air-borne contamination Reduces maintenance intervals, thus reducing total cost of ownership Requires no additional pipe fittings thus reducing cost of installation Improved aesthetics Vertical or horizontal mounting Compatible with metric (25mm OD) and imperial (1” OD) pipes eliminating the need for pipe adaptors
-
Suitable for all Xtralis Aspirating Smoke Detectors Improved detector longevity in applications with high levels of air-borne contamination Reduces maintenance intervals, thus reducing total cost of ownership Requires no additional pipe fittings thus reducing cost of installation Improved aesthetics Vertical or horizontal mounting Compatible with metric (25mm OD) and imperial (1” OD) pipes eliminating the need for pipe adaptors
-
-
Provides Immediate Status Reporting for a Single VESDA Zone. Allows Zone Control of Assigned VESDA Detector. High Intensity Alarm LEDs. Remote Relay Option. 20-Segment Vertical Bar Graph Display. Alarm Threshold Indicators. Built-In Sounder for Audible Warning. Comprehensive Fault Reporting. Multi-mode Numeric Display (defaults to smoke obscuration). Recessed Mounting Option.
-
-
-
-
-
-
User friendly menu system Supports multiple languages Single point access to entire VESDAnet system Alarm and fault simulation Shows wiring order Locates communications failures Password security Hand held or remote mounting Automatic Logoff when inactive Backlit LCD screen
-
PC-Link HLI Sliding Windows RS232 Interface (For VSM, V-Config & VSC Software)
-
-
-
Direct access and monitoring of your entire VESDAnet network Seamless data transfer Easily configured using Xtralis configuring and monitoring software packages
-
ModBus HLI Type 1 (VHX-0400) which echoes each character received on the RS232 link back to the host together with reply message. ModBus HLI Type 2 (VHX-0410) which has the echoing function disabled.; Direct access and monitoring of your VESDAnet system. Seamless data transfer. Easily configured using Xtralis configuring and monitoring software packages.
-
Direct access and monitoring of your VESDAnet system. Seamless data transfer. Easily configured using Xtralis configuring and monitoring software packages.
-
Direct access and monitoring of your entire VESDAnet system Seamless data transfer Easily configured using Xtralis configuring and monitoring software packages
-
-
Direct access and monitoring of your entire VESDAnet system Seamless data transfer Easily configured using Xtralis configuring and monitoring software packages.
-
Direct access and monitoring of your entire VESDAnet network Seamless data transfer Easily configured using Xtralis configuring and monitoring software packages
-
Wall-mounted ModBus HLI Type 1 (VHX-1400) which echoes each character received on the RS232 link back to the host together with reply message. Wall-mounted ModBus HLI Type 2 (VHX-1410) which has the echoing function disabled.
-
Wall-mounted ModBus HLI Type 1 (VHX-1400) which echoes each character received on the RS232 link back to the host together with reply message. Wall-mounted ModBus HLI Type 2 (VHX-1410) which has the echoing function disabled.
-
Direct access and monitoring of your entire VESDAnet system Seamless data transfer Easily configured using Xtralis configuring and monitoring software packages
-
Quick and simple to install Provides seamless VESDAnet fault tolerant communication Minimal configuration required before operation Diagnostic LED indicators (visible when case removed) Fully transferrable to another VLF detector
-
Provides two (2) additional relays Provides an extra General Purpose Input (GPI) with line monitoring Quick and simple to install Out-of-the-box operation, with minimal configuration required for extra features Diagnostic LEDs give visual indication of the card’s status Fully compatible with Xtralis VESDA VLF smoke detector
-
Provides two (2) additional relays Provides an extra General Purpose Input (GPI) with line monitoring Quick and simple to install Out-of-the-box operation, with minimal configuration required for extra features Diagnostic LEDs give visual indication of the card’s status Fully compatible with Xtralis VESDA VLF smoke detector
-
Available in three sizes: 0.5A / 7Ahr,0.5A / 14Ahr and 2A / 38Ahr Temperature compensated charging to maximise battery life Designed to blend in with Xtralis detectors Knockouts designed to line up with Xtralis detectors LED indication on 2A and 5A units Relay outputs for connection to the VESDA general-purpose input. VdS Approved CE Approved EN54-4:1997+A1:2002+A2:2006
-
Available in three sizes: 0.5A / 7Ahr,0.5A / 14Ahr and 2A / 38Ahr Temperature compensated charging to maximise battery life Designed to blend in with Xtralis detectors Knockouts designed to line up with Xtralis detectors LED indication on 2A and 5A units Relay outputs for connection to the VESDA general-purpose input. VdS Approved CE Approved EN54-4:1997+A1:2002+A2:2006
-
Available in three sizes: 0.5A / 7Ahr,0.5A / 14Ahr and 2A / 38Ahr Temperature compensated charging to maximise battery life Designed to blend in with Xtralis detectors Knockouts designed to line up with Xtralis detectors LED indication on 2A and 5A units Relay outputs for connection to the VESDA general-purpose input. VdS Approved CE Approved EN54-4:1997+A1:2002+A2:2006
-
User (USR) is only able to view parameters, check status, alarms and reset the system. Administrator (ADM) has access to most commands and programming parameters. Distributor (DST) is the topmost level and has unlimited access to all commands and parameters in the system. Lost PIN numbers can be overcome by obtaining a once only pass number from your Xtralis VESDA dealer.
-
Provides Immediate Status Reporting for a Single VESDA Zone. Allows Zone Control of Assigned VESDA Detector. High Intensity Alarm LEDs. Remote Relay Option. 20-Segment Vertical Bar Graph Display. Alarm Threshold Indicators. Built-In Sounder for Audible Warning. Comprehensive Fault Reporting. Multi-mode Numeric Display (defaults to smoke obscuration). Recessed Mounting Option.
-
