Addressable Fire Alarm Control Panels From Reputable Brands
Fire alarm panels are the main component in the system. It is the fundamental point in which all the devices including the call points, detectors and sounders, are connected and it plays a huge role in triggering the warning signal when a fire is present.
Therefore it is crucial that your panel is in good working order and of high quality to cater to the number of zones your fire alarm system needs and they can all be found here at J K Fire.
-
Designed to EN54: parts 2 and 4 PC based commissioning tools allow complex fire plans to be configured and flexible programming options are available at the panel. The control panel has a simple user interface with LCD screen providing accurate information in an emergency Networks of up to 10 panels can be programmed seamlessly as one system. 2 and 4 loop panels can be connected on the same network allowing flexibility of design In the event of a fire or fault, SenTRI's analogue addressable technology will provide a detailed log of events A built-in printer fitted to the SenTRI FOUR can be used to print out device configurations, loop maps and historic logs. A menu option is available to turn off the printer when a printed record is not required; Input/Output Card for SenTRI4 Model: SENTRI4-IOC-DOM Shipping Weight: 200gms -
One full SLC circuit expandable to two Three programmable relays 5.25A power supply Compatible with eMatrix graphics annunciator Powerful, network wide cause and effects (500 total). Fully user programmable by point or zone Can be networked with additional RS and/or Elite control panels Compatible with eView Annunciator Programmable through a PC connection to the panel Stores 1,000 last events in history log Model ranges include with or without a Dual-Line internal DACT Two programmable NAC circuits with internal synchronization support UL864 listed EN54 Approved versions also available
-
Key Features:; Expandable from 1 to 2 loops Network up to 64 panels 2 programmable sounder circuits 5 programmable inputs 3 programmable relays 3A power supply Up to 512 additional programmable I/O via Syncro I/O modules Powerful, network wide cause and effects Sensitivity adjustment and Drift Compensation Compatible with View repeaters Supports Apollo, Argus Vega and Hochiki protocols Stores 500 last events in event log Installer friendly, removable equipment chassis Different language and character set variants available Approved and certified to EN54-2/ EN54-4 M3 Enclosure - 385 x 520 x 110
-
Key Features:; Expandable from 1 to 2 loops Network up to 64 panels 2 programmable sounder circuits 5 programmable inputs 3 programmable relays 3A power supply Up to 512 additional programmable I/O via Syncro I/O modules Powerful, network wide cause and effects Sensitivity adjustment and Drift Compensation Compatible with View repeaters Supports Apollo, Argus Vega and Hochiki protocols Stores 500 last events in event log Installer friendly, removable equipment chassis Different language and character set variants available Approved and certified to EN54-2/ EN54-4 M3 Enclosure - 385 x 520 x 110
-
16 zonal LED indicators 2 programmable sounder circuits 5 programmable inputs 3 programmable relays 3A power supply Large graphic display Real time clock Certified to EN54-2/4 Sensitivity adjustment and Drift Compensation Stores 500 last events in event log Dial up modem connection available Compact, stylish enclosure Installer friendly, removable equipment chassis Different language and character set variants available Comprehensive day/night mode facility; Variants Available:
-
Up to 15 annunciators can be connected to each Syncro AS panel Response or Syncro AS fire control panel. Large liquid crystal display (240 x 64 pixels) High brightness LED indications Internal sounder Replicates all Syncro panel controls Simple, two-wire serial connection Small enclosure Removable electronics for easy installation 24V DC or 230V AC power options Low power consumption Multi language options Connection monitored by Syncro fire control panel
-
Up to 15 annunciators can be connected to each Syncro AS panel Response or Syncro AS fire control panel. Large liquid crystal display (240 x 64 pixels) High brightness LED indications Internal sounder Replicates all Syncro panel controls Simple, two-wire serial connection Small enclosure Removable electronics for easy installation 24V DC or 230V AC power options Low power consumption Multi language options Connection monitored by Syncro fire control panel
-
Up to 15 annunciators can be connected to each Syncro AS panel Response or Syncro AS fire control panel. Large liquid crystal display (240 x 64 pixels) High brightness LED indications Internal sounder Replicates all Syncro panel controls Simple, two-wire serial connection Small enclosure Removable electronics for easy installation 24V DC or 230V AC power options Low power consumption Multi language options Connection monitored by Syncro fire control panel
-
-
-
All major device manufacturers devices supported Optional, local or remote printers Walk test facility Provide up to 72hr stand-by (subject to verification) Supporting a total of five industry leading protocols, Apollo, Hochiki ESP, Nittan, Morley-IAS and System Sensor Simple, robust design to EN54 Parts 2 & 4 Facility to print history and event logs Report & Control System - For multiple building sites where information is presented at the local and master panels only 99 panel network allows systems in excess of 60,000 devices to be managed
-
All major device manufacturers devices supported Optional, local or remote printers Walk test facility Provide up to 72hr stand-by (subject to verification) Supporting a total of five industry leading protocols, Apollo, Hochiki ESP, Nittan, Morley-IAS and System Sensor Simple, robust design to EN54 Parts 2 & 4 Facility to print history and event logs Report & Control System - For multiple building sites where information is presented at the local and master panels only 99 panel network allows systems in excess of 60,000 devices to be managed
-
Nano is compatible with Gent’s range of loop powered devices. All devices connect onto the same two core loop, separate sounder wiring circuits are not required. Nano drives advanced detection technology including the full S-Quad range. A building’s fire plan can be configured either at the Nano panel or through the simple PC commissioning tool. Devices can be added and system changes can be managed via the panel interface or the commissioning tool. Nano’s commissioning tool has been developed Specifically to improve the set up and commissioning time. The Nano panel has a stylish design that would suit any building.
-
Designed to EN54: parts 2 and 4 PC based commissioning tools allow complex fire plans to be configured and flexible programming options are available at the panel. The control panel has a simple user interface with LCD screen providing accurate information in an emergency Networks of up to 10 panels can be programmed seamlessly as one system. 2 and 4 loop panels can be connected on the same network allowing flexibility of design In the event of a fire or fault, SenTRI's analogue addressable technology will provide a detailed log of events A built-in printer fitted to the SenTRI FOUR can be used to print out device configurations, loop maps and historic logs. A menu option is available to turn off the printer when a printed record is not required; The SMS SENTRI4-NC is a network card for the SenTRI 4 control panel Model: SENTRI4-NC Shipping Weight: 100gms
-
From 1-8 loops (Apollo XP95 protocol) A clear, backlit display with zonal indication option User-friendly controls Membrane facia with tactile switches Powerful processing ability Windows-based software download package Alarm sensitivity & delay adjustments Message edited by PC or keyboard Fully-networkable with graphics package, Konex network repeaters and other Nexus panels Designed to meet BS5839 part 4 Complies with EMC and LVD Directives
