Conventional Ancillaries Device From Reputable Brands
IWe have the very latest ancillary devices that are compatible with a huge range of Addressable Fire Alarm Systems products can all be found here at J K Fire.
-
Hochiki Standard Enclosure Document Box DB/SSE; Matches design and colour scheme for standard HFP AP, CP and CP-XT control panel ranges Easy to install Key Lockable Designed for versatility Choice of small or large capacity enclosure Separate logbook available -
Compatible with the majority of existing Analogue and Conventional bases Colour matches standard Hochiki Analogue and Conventional sensor/detector/base ranges 4 pre-moulded knock-outs provide wiring entry Low profile - only 16mm
-
Allows base and analogue sensor or conventional detector to be flush mounted Supplied with fixing brackets Colour-matched to existing white sensor/detector ranges Sturdy construction, easy to install Suitable for a maximum ceiling thickness of 30 mm
-
Key Features; Compatible with all Vega and Aurora devices Deep Profile – 27 mm Quick cable connectivity
-
Relay command selectable 12V or 24V Secure and reliable cable termination The base does not provide line continuity during detector removal Useful for hybrid installation (fire, security) or to send command to a special device (Electromagnet, switch, etc.)
-
Low Profile – 16 mm Quick cable connectivity; UB100 - Universal Base UB100S - Universal Base with shorting clip UBR100 - Universal Base 1K Ohm Resistor UBR100-330 - Universal Base 330 Ohm Resistor UBR100-390 - Universal Base 390 Ohm Resistor UBR100-470 - Universal Base 470 Ohm Resistor; UBD100 - Deep Schottky Diode Base UBDR100 - Deep Base 1K Ohm Resistor & Schottky Diode UBDR100-330 - Deep Base 330 Ohm Resistor & Schottky Diode UBDR100-390 - Deep Base 390 Ohm Resistor & Schottky Diode UBDR100-470 - Deep Base 470 Ohm Resistor & Schottky Diode
-
Key Features:; 2 minutes to fit on site Kit available from stock Colour to match standard Control Panel ranges Special colours available on request Attractive design Key lockable
-
Key Features:; Available with red or yellow high brightness, flashing LED indicators Can be used for Fire alarm warning, activated by a sounder circuit or to indicate and initiate an active isolation Optional silence buzzer keyswitch Disable buzzer option via internal jumper link Optional Keyswitch to perform isolation Terminations for incoming and outgoing wiring Surface mounted box supplied Front panel can be fitted to a single gang UK back box
-
Key Features:; Available with red or yellow high brightness, flashing LED indicators Can be used for Fire alarm warning, activated by a sounder circuit or to indicate and initiate an active isolation Optional silence buzzer keyswitch Disable buzzer option via internal jumper link Optional Keyswitch to perform isolation Terminations for incoming and outgoing wiring Surface mounted box supplied Front panel can be fitted to a single gang UK back box
-
Fully welded, all steel construction Tough epoxy powder coated finish Key lockable Wide range of styles and sizes Up to 65Ah batteries can be fitted Fully enclosed and robust construction
-
Key Features:; High brightness red LED indicators for reliability and low power consumption Wide viewing angle LEDs flash alternately to easily attract attention Units to fit to standard gang or round electrical back boxes Compatible with conventional and addressable detectors Printed with “FIRE ALARM IN CON CEALED SPACE” as standard Custom printing and languages available on request
-
2.5A and 5.25A versions Chassis only or enclosure mounted with battery space 110V or 230V input Regulated, true 24V output Intelligent battery charging and temperature compensation House up to 26Ah batteries Status indicators for monitored faults Dual output option for powering fire alarm control panels remotely Chassis versions have same mounting points
-
2.5A and 5.25A versions Chassis only or enclosure mounted with battery space 110V or 230V input Regulated, true 24V output Intelligent battery charging and temperature compensation House up to 26Ah batteries Status indicators for monitored faults Dual output option for powering fire alarm control panels remotely Chassis versions have same mounting points
-
-
Key Features:; High brightness red LED indicators for reliability and low power consumption Wide viewing angle LEDs flash alternately to easily attract attention Units to fit to standard gang or round electrical back boxes Compatible with conventional and addressable detectors Printed with “FIRE ALARM IN CON CEALED SPACE” as standard Custom printing and languages available on request
