Whether Edwards™ detection and alarm solutions are protecting the lives and livelihoods of the people who make businesses run, or who receive treatment at healthcare institutions; whether they’re charged with protecting students, staff and faculty at the world’s finest universities, or preserving irreplaceable artifacts that bring humankind’s history to life; Edwards finds innovative ways to meet site-specific challenges and make every project a success.
Edwards’ solutions are modular, scalable, and meet the needs of applications ranging from fire detection to industrial signaling and mass notification – all technologically advanced innovations that deliver value and reliability for the entire service life of the product.
When facility owners and designers do business with Edwards, their investment is underwritten by a history of excellence and ingenuity that dates back over 140 years and they can all be found here at JK Fire.
-
Product Description The Edwards EST SD-T36 is a 36-inch Sampling Tube designed for use with SIGA-SD. -
Product Description The Edwards EST SD-T42 is a 42-inch Sampling Tube designed for use with SIGA-SD.
-
-
Product Description The Edwards EST SD-T78 is a 78-inch Sampling Tube designed for use with SIGA-SD.
-
Product Description Edwards SD-TRK is a keyed Remote Test Station designed for use with Edward's SuperDuct 2-wire duct smoke detectors. Mounts to single-gang electrical box.
-
Product Description The Edwards EST SD-TRK4 Remote Test Station is designed for use with the Edwards EST SIGA-SD Intelligent Duct Smoke Detector.
-
Product Description Edwards SD-TRM Remote Test Station
-
Product Description Edwards Signaling TRM4 SuperDuct Series Remote Test Station is intended for use with 4-wire detectors.
-
Product Description The Edwards EST SIGA-270 is a one stage intelligent Manual Pull Station compatible for use only with the Signature Loop Controller. One pull on the station handle breaks the glass rod and triggers an alarm. Microprocessor stores programmable address, serial number, type of device, job number, hours of operation, last maintenance date, number of alarms and troubles, and time and date of last alarm. One device address is required. The loop controller assigns an address to the station automatically. A custom address can be assigned to the station via laptop computer; no addressing switches are used.
-
Product Description The Edwards EST SIGA-270P is a Single Action Two Stage (Presignal) Manual Pull Station compatible for use only with the Signature Loop Controller. Microprocessor stores programmable address, serial number, type of device, job number, hours of operation, last maintenance date, number of alarms and troubles, and time and date of last alarm. One device address is required. The loop controller assigns an address to the station automatically. A custom address can be assigned to the station via laptop computer; no addressing switches are used.
-
Product Description Edwards EST SIGA-278 Fire Alarm Pull Station is an addressable contemporary style manual station made from durable red colored lexan. Signature Series manual stations are compatible only with EST’s Signature Loop Controller. The loop controller electronically addresses each manual station. Mounts to 2½ inch (64 mm) deep single-gang boxes.
-
Product Description Edwards EST SIGA-AA30 Intelligent Audio Amplifier – 30 Watt. Two riser inputs, 1/25 Vrms. Output selectable 25/70 Vrms. Communicates with panel via Signature or GSA Data Circuit. . COMPATIBLE power sources — System power, MIRMIRBPS6A/10A, APS6A/10A; SIGA-APS (for retrofit only) COMPATIBLE enclosures — 2-WB3(R), 2-WB7(R), RACCR, APS6A, APS10A
-
Product Description Edwards EST SIGA-AA50 Intelligent Audio Amplifier Board
-
Product Description The Edwards EST SIGA-AB4G Audible (Sounder) Detector Base is designed for use with Signature Series detectors and GE's Signature Loop Controller. The sounder base uses two reversible jumpers to select any one of four outputs: 1—High dBA; Temporal Tone output (default). 2—High dBA; Steady Tone output. 3—Low dBA; Temporal Tone output. 4—Low dBA; Steady Tone output. For use with Edwards / EST Signature Series detectors: — SIGA-IS Ionization Smoke Detector — SIGA-PS Photoelectric Smoke Detector — SIGA-PHS Combination Photoelectric Smoke and Fixed-Temperature Heat Detector — SIGA-IPHS Combination Ionization, Photoelectric, and Thermal Boost Type Smoke Detector — SIGA-HFS Fixed-Temperature Heat Detector — SIGA-HRS Combination Rate-of-Rise, and Fixed-Temperature Heat Detector
-
Product Description The Signature Series model SIGA-AB4GT CO Compatible Sounder Base is a sounder base specifically designed for use with CO sensors. It is not compatible with a coded system. The base uses the same address and programming label as the detector it supports. It requires a SIGA-TCDR Temporal Pattern Generator to add the audible output function to any Signature Series detector
