Whether Edwards™ detection and alarm solutions are protecting the lives and livelihoods of the people who make businesses run, or who receive treatment at healthcare institutions; whether they’re charged with protecting students, staff and faculty at the world’s finest universities, or preserving irreplaceable artifacts that bring humankind’s history to life; Edwards finds innovative ways to meet site-specific challenges and make every project a success.
Edwards’ solutions are modular, scalable, and meet the needs of applications ranging from fire detection to industrial signaling and mass notification – all technologically advanced innovations that deliver value and reliability for the entire service life of the product.
When facility owners and designers do business with Edwards, their investment is underwritten by a history of excellence and ingenuity that dates back over 140 years and they can all be found here at JK Fire.
-
Product Description Edwards 8572-A111 Bell Circuit Module for the Edwards 5703 FACP. -
Product Description The Edwards 864-E5 is a Fire Horn for surface mounting. 12V 60HZ 1.25AMP
-
Product Description The Edwards 874-G5 Vibrating Horn is designed for surface mounting. Adjustable output: 88 to 113dB @ 1m (78 to 103dB @ 10ft.) Power: 24VAC, 0.63 A Also available: 872-PO AdaptaHorn Plastic projector snaps onto any AdaptaHorn. Sold separately.
-
Product Description Edwards 879EX-E1 Adaptahorn is a heavy-duty, high decibel, vibrating horn signal designed for use in hazardous locations. 12VDC Operating voltage with wide operating voltage range -20% to +10% of nominal voltage. Power connection wires embedded in sealing compound Two mounting brackets are provided on either side of the unit for wall mounting. The housing is tapped on one side for 3/4" conduit to allow for field wiring installation.
-
Product Description Edwards 881ALD-AW Flush Horn
-
Product Description Edwards 8ZEXP 8 Zone Expansion Module The 8 Zone Expansion Module for LSS4 Fire Alarm Control Panel. Class B and open collector circuit per zone.
-
Product Description The Edwards 98BR-G1 is an Adapt-A-Beacon Light Duty Strobe. FEATURES and SPECIFICATIONS: Voltage: 24 VDC Color: Red Lamp Type: Strobe Flash Rate/Minute: 65 Mounting: Conduit;Direct
-
Product Description Edwards EST A60U2 Line Isolator Module
-
Product Description Edwards EST B4U Detector Base is intended for use with these Analog Addressable Detectors from GE's Edwards Signalling and Security Systems: — E-HD Heat Detector — E-PHD Photoelectric/Heat Detector — E-PD Photoelectric Detector — E-PDD Duct Detector
-
Product Description The EST BPS-10A Booster Power Supply (10 amp) is designed to extend the signaling capacity of a fire alarm, security, or access control system. The BPSs can be connected to existing Class A or Class B notification appliance circuits (NACs) or activated via option modules. The BPSs can either pass or generate synchronization signals for Genesis sync strobes. The BPSs have four independent NAC / AUX circuits that are supervised when configured for NAC, plus a trouble relay. The input circuits of the booster power supply can be connected to 12 VDC or 24 VDC systems.
-
-
Product Description The EST BPS-10A Booster Power Supply (10 amp) is designed to extend the signaling capacity of a fire alarm, security, or access control system. The BPSs can be connected to existing Class A or Class B notification appliance circuits (NACs) or activated via option modules. The BPSs can either pass or generate synchronization signals for Genesis sync strobes. The BPSs have four independent NAC / AUX circuits that are supervised when configured for NAC, plus a trouble relay. The input circuits of the booster power supply can be connected to 12 VDC or 24 VDC systems.
-
Product Description This is the Replacement Board for the Edwards EST BPS6A Booster Power Supply (6.5 amp) is designed to extend the signaling capacity of a fire alarm, security, or access control system. The BPSs can be connected to existing Class A or Class B notification appliance circuits (NACs) or activated via option modules. The BPSs can either pass or generate synchronization signals for Genesis sync strobes. The BPSs have four independent NAC/AUX circuits that are supervised when configured for NAC, plus a trouble relay. The input circuits of the booster power supply can be connected to 12 VDC or 24 VDC systems.
-
Product Description The Edwards EST C-DTS is a Detector Test Station, single-gang, flush mount.
-
Product Description The Edwards CF200-EWT is an Explosion-Proof Fixed Temperature Heat Detector. Model CF-200-EWT is rated for 200F (93C) Contacts: Single Pole Normally Open - Rated at: 3.0 amps at 6 to 125VAC; 1.0 amps at 6 to 28VDC; 0.3 amps at 125VDC; 0.1 amp at 250VDC.
