Whether Edwards™ detection and alarm solutions are protecting the lives and livelihoods of the people who make businesses run, or who receive treatment at healthcare institutions; whether they’re charged with protecting students, staff and faculty at the world’s finest universities, or preserving irreplaceable artifacts that bring humankind’s history to life; Edwards finds innovative ways to meet site-specific challenges and make every project a success.
Edwards’ solutions are modular, scalable, and meet the needs of applications ranging from fire detection to industrial signaling and mass notification – all technologically advanced innovations that deliver value and reliability for the entire service life of the product.
When facility owners and designers do business with Edwards, their investment is underwritten by a history of excellence and ingenuity that dates back over 140 years and they can all be found here at JK Fire.
-
Product Description The Edwards EST 279B-1120 Non-coded Manual Pull Station is a Double Action Pull Station, Double Pole, Open Circuit, with Key Reset. ACCESSORIES — 276-GLR Replacement Glass Rods — 276-K1 Station Reset Key, Supplied with all Key Reset Stations — 276-K2 General alarm key — K-276B-RSB Red Surface Back Box NOTE: See also Edwards EST 278B-1120 Non-coded Manual Pull Station. -
Product Description Edwards EST 282B is a 194 degree fixed temperature and rate-of-rise thermal sensor.
-
Product Description The Edwards 283B-PL is a Heat Detector (135F Fixed) Fixed Temp rating: 135F Single circuit normally open contact rated at 3 amps at 6 to 125V AC; 1.0 amps at 6 to 28V DC, 0.3 amps at 125V DC, and .01 amps at 250V DC Includes: 280A-PL Plastic Mounting Plate. Detector twists and locks onto mounting plate. Mounting plate may be surface mounted or mounted onto any 3 1/4" (83mm) or 4" (102mm) octagon box. Replaces the Edwards EST 281B-PL.
-
Product Description The Edwards 284B-PL is a Heat Detector Fixed Temp rating: 194F Single circuit normally open contact rated at 3 amps at 6 to 125V AC; 1.0 amps at 6 to 28V DC, 0.3 amps at 125V DC, and .01 amps at 250V DC Includes: 280A-PL Plastic Mounting Plate. Detector twists and locks onto mounting plate. Mounting plate may be surface mounted or mounted onto any 3 1/4" (83mm) or 4" (102mm) octagon box.
-
Product Description The EST (GE) 3-12SG [NEW] features.12 switches with 12 Green LED Display/Control Module Intended for use with EST3 Remote Annunciators.
-
Product Description Edwards EST 3-ANNCPU3 Annunciator CPU is intended for use with Edwards EST EST3 Remote Annunciators.
-
Product Description Edwards 3-ANNSM Annunciator Support Module
-
-
-
Product Description This is the Replacement Board for the Edwards EST EST3 Multiplexed Fire Alarm Control Panel. The Edwards EST 3-CPU3 Central Processor Module is the control element for all rail modules and control/display modules installed in a EST3 Multiplexed Fire Alarm Control Panel. NOTE: The 3-CPU3 is a replacement for the 3-CPU module and the 3-CPU1 module.
-
Product Description Edwards EST 3-DSDC1 is a Signature (Dual) driver controller module.
-
Product Description Edwards EST 3-LCD Liquid Crystal Display Module is the primary user interface in the EST3 Life Safety System.
-
Product Description Edwards EST 3-LCDANN is a Remote LCD Command Module Annunciator. Features standard 3-LCD (168 characters) and large-format 3-LCDXL1 (960 character) display options. For use with EST3 FACPs. Includes CPU, LCD display and doors. Order wallbox separately.
-
Product Description Edwards EST GE 3-MODCOM
-
Product Description Edwards EST 3-PPS/M Primary Power Supply w/ local rail module, 120V 50/60 Hz. The primary power supply provides the system with battery charging and voltage regulation for EST 3 FACPs.
