-
Key Features:; Beacon with Integral Base Non Addressed - dedicated for use with EV-PYS -
Key Features:; Combined Sounder and Beacon with Integral Base Evolution FSK protocol EEPROM Addressed (Programmer)
-
Nittan EV-ABS Loop Powered Base Mounted Sounder; Evolution FSK protocol DIL Switch Addressed Loop Powered Sounder Base
-
Key Features:; Wall or Base mounted sounder DIL Switch Addressed Robust Fully Modulated AS Communications Protocol
-
Each loop can support up to 200 voice sounders, 100 visual alarm devices (VADs) and up to 70 combined sounder VADs EN54-23 VADs with adjustable light coverage matching the sounder output Comprehensive and easy to use design and commissioning tools Four voice phrases and a bell tone available as standard Voice and tone modes can be freely configured within the same sounder Active background monitoring of sounder and VAD circuits Adjust the sounder volume via the commissioning tool, the panel or the HandiLink infrared remote control
-
Key Features:; 4 pre-set message pairs, capable of up to 15 tone message pairs Low current and high volume Fully synchronised Set up and test at point of installation
-
Key Features:; 15 tone pairs It is possible to set individual control of the sounder and visual indicator Volume and tone settings can be selected from the control panel Tones can be used for other purposes in addition to warning of fire, making the device ideal for use in schools etc. Soft start option, ideal for hospitals and nursing homes Group and global control for increased response time
-
Each loop can support up to 200 voice sounders, 100 visual alarm devices (VADs) and up to 70 combined sounder VADs EN54-23 VADs with adjustable light coverage matching the sounder output Comprehensive and easy to use design and commissioning tools Four voice phrases and a bell tone available as standard Voice and tone modes can be freely configured within the same sounder Active background monitoring of sounder and VAD circuits Adjust the sounder volume via the commissioning tool, the panel or the HandiLink infrared remote control
-
High intensity LED technology Single Loop Address - addressed via the TCH-B100 Hand Held Programmer Up to 127 devices on one loop Approved by VdS
-
High Intensity LED technology 1Hz flash frequency Addressable via Hand Held Programmer (TCH-B100) Up to 127 devices per loop Low current consumption Available in 3 lens colours Approved by VdS
-
Key Features:; 4 pre-set message pairs, capable of up to 15 tone message pairs Low current and high volume Fully synchronised Set up and test at point of installation
-
Features; Manufactured to EN54 part 3 Integral sounder and detector base Volume and tone adjustable after installation Low Power Synchronisation Do not require use of a standard base (maybe installed directly onto a standard besa box)
-
-
Loop Powered - Reduced installation costs High Output/Low consumption - Lower lifetime costs Indoor and Outdoor models - Same sounder tones in all areas Sounder/LED Beacon Version - DDA Compliant 16 Tones and 2 Flash rates - Suits individual requirements Reflective Sound Monitoring RSM - Reassurance that ALL sounders are working Integral Line Isolator - Saves cost and installation time; Models Available
-
-
MX LPAV3000 Loop Powered Sounder/Beacon - Addressable Base; High output programmable sounder base and sounder beacon base One point of installation for detector, isolator, sounder & beacon Loop powered from the MX Technology® Digital Loop High brightness Multi-LED Beacon Software programmable 15 Tones and 2 Flash Rates Integral line isolator RSM (Reflective Sound Monitoring) Can be used as a standalone device using the sounder blanking cap
-
Loop Powered - Reduced installation costs High Output / Low consumption - Lower lifetime costs Indoor and Outdoor models - Same sounder tones in all areas Sounder / LED Beacon Version - DDA Compliant 16 Tones and 2 Flash rates - Suites individual requirements Reflective Sound Monitoring RSM - Reassurance that ALL sounders are working Integral Line Isolator - Saves cost and installation time
-
Loop Powered - Reduced installation costs High Output / Low consumption - Lower lifetime costs Indoor and Outdoor models - Same sounder tones in all areas Sounder / LED Beacon Version - DDA Compliant 16 Tones and 2 Flash rates - Suites individual requirements Reflective Sound Monitoring RSM - Reassurance that ALL sounders are working Integral Line Isolator - Saves cost and installation time
-
Sensor, sounder and beacon from a single wiring point - minimising installation costs Powered directly from the ZP loop Separate addresses selectable for sensor and sounder beacon Up to 40 units directly on the loop High efficiency sound gun transducer Plug in base - no internal connections Wide range of international sound types and frequencies
-
Ziton ZP755B-2W Addressable Sounder Base (White); Sensor and sounder from a single wiring point - minimising installation costs Powered directly from the ZP loop Up to 60 sensor/sounders directly on the loop Separate addresses selectable for sensor and sounder High efficiency sound gun transducer Compatible with all ZP loop devices Wide range of international sound types and frequencies
-
Allows the 801/802/812/901 & 912 Sounder Base to become Addressable without the need to fit a Detector, thus creating an Addressable Loop Powered Sounder Suitable for wall or ceiling mounting Sounder Selection Tones as per 801/802/812/901 & 912 Sounder Base Fits the 801RB Relay Base to provide an Addressable Relay Base without the need to fit a Detector Colour matched to Sounder Bases Locked into Sounder Base using Detector Locking Pin SAM 800 is configurable in CONSYS SAB800 / SAB801 may be used with 5B or MUB bases SAB800 / SAB801 adds a Flashing Red Beacon facility to the 801/802/812/901 & 912 Sounder Base SAB801 Low current consumption (loop powered) SAB800 has two Modes of Operation - continuous or 2Hz flash, configurable in CONSYS SAB801 has two Modes of Operation - continuous or 1Hz flash , configurable in CONSYS
-
Ziton ZP755HAV-2W Addressable Sounder Beacon; Cost effective compliance with disability legislation Powered directly from the ZP loop Up to 25 sounder beacons directly on the loop wiring Low current LED based visual element High efficiency sound gun transducer Plug in base - no internal connections Minimises installation points
-
Ziton ZP755HA-2W Horn Sounder White; Wide 'all around' sound distribution Microphone self test facility Plug in base - no internal connections Up to 40 sounders directly on the loop wiring High efficiency sound gun transducer Synchronised outputs
-
Rated IP 65 105 dBA sound output Microphone self test facility High efficiency sound gun transducer
-
Ziton ZP755V Addressable Beacon; Cost effective compliance with disability legislation Powered directly from the ZP loop Up to 60 beacons directly on the loop wiring Fully addressable Low current LED based visual element Compatible with all ZP loop devices Minimises installation points
-
Powered directly from the ZP loop Up to 100 sensor and 100 sounders directly on the loop wiring Plug in base - no internal connections High efficiency sound gun transducer Wide range of international sound types and frequencies
-
Weatherproof Sounder and Beacon in a single unit 105dBA sound output Low current LED based visual element High effciency sound gun transducer Up to 24 sounder beacons powered directly on loop wiring
-
Uses high intensity LED (white flash only) EN 54-23 Compliant Category C. VAD Coverage C-3-8.5 Automatic LED check when VAD activated Flash rate 0.5Hz Fault signal if LED check failed Locking mechanism (grub screw) Wide angle of visibility Synchronised with the Apollo Protocol
-
Uses high intensity LED (white flash only) EN 54-23 Compliant Category C. VAD Coverage C-3-8.5 Automatic LED check when VAD activated Flash rate 0.5Hz Fault signal if LED check failed Locking mechanism (grub screw) Wide angle of visibility Synchronised with the Apollo Protocol
-
Individual control of the sounder and visual indicator Volume and tone settings can be selected from the control panel Tones can be used for other purposes in addition to warning of fire, making the device ideal for use in schools etc Soft start option, ideal for hospitals and nursing homes Group and global control for increased response time
-
Brand Information:; 15 pairs of tones It is possible to set individual volume of the sounder from the fire control panel Tones can be used for other purposes in addition to warning of fire, ideal for schools Enables soft start option, ideal for hospitals and nursing homes Unique acoustic and visual indicator self-test
-
Key Features:; It is possible to set individual control of the sounder and visual indicator Volume and tone settings can be selected from the control panel Tones can be used for other purposes in addition to warning of fire, ideal for schools Enables soft start option, ideal for hospitals and nursing homes Electronic bell tone
-
Four pre-set message pairs Capable of up to 15 tone message pairs Low current and high volume Fully synchronised Set up and test at point of installation
-
Four pre-set message pairs Capable of up to 15 tone message pairs Low current and high volume Fully synchronised Set up and test at point of installation
-
Two tones Two volume ranges 55-75dB(A) and 75-91dB(A) Individual and group addressing Unique acoustic self-test
-
Key Features:; Indoor use The Intelligent Base Sounder complies with the requirements of EN54–3: 2001.
