-
Key Features:; Detector and sounder from a single wiring point – minimising installation costs Powered directly from the ZP loop Up to 60 detectors with sounders directly on the loop Separate addresses selectable for detector and sounder High efficiency sound gun transducer Compatible with all ZP loop devices Wide range of international sound types and frequencies -
Cost effective compliance with disability legislation Powered directly from the ZP loop Up to 25 sounder beacons directly on the loop wiring Low current LED based visual element High efficiency sound gun transducer Plug in base - no internal connections Minimises installation points
-
Key Features:; Cost effective compliance with disability legislation Powered directly from the ZP loop Up to 60 beacons directly on the loop wiring Fully addressable Low current LED based visual element Compatible with all ZP loop devices
-
Key Features:; 101dB @ 1m sound output 16 tones can be selected from control panel White Flash rates between 0.33Hz and 1.5Hz Hard addressed via 8 way dip-switch Can also be soft addressed via MKII Handheld Programmer Flush or surface fixing Housed in UL V0 flame retardant ABS 4 x 20mm cable entries (2 top, 2 bottom) First fix, wire to back box technology
-
Wide 'all around' sound distribution Microphone self test facility Plug in base – no internal connections Up to 40 sounders directly on the loop wiring High efficiency sound gun transducer Synchronised outputs
-
Cost effective compliance with disability legislation Powered directly from the ZP loop Up to 20 devices directly on the loop wiring Low current LED based visual element High efficiency sound gun transducer Plug in base – no internal connections Minimises installation points
-
Enhanced sounder circuit integrity and reliability Compliant with EN 54 and BS 5839-1 Certified by LPCB to EN 54 Part 17 and 18 Potential cable savings 45 Sounders per loop System includes BansheeMT and FlashToneMT Can also be used with other sounder and strobe units Multiple interfaces can be installed dependent on size of system Isolator fits into standard base or deep base Signalling device is monitored Incorporates double switch short circuit isolator in sounder base and interface modules Interface module has fail safe operation
-
-
Key Features:; Complies to EN54 parts 3 100dB @ 1m sound output 16 tones can be selected from control panel Hard addressed via 8-way dip switch Can also be soft addressed via MKII handheld programmer Flush or surface fixing Housed in UL VO flame retardant ABS 4 x 20mm cable entries (2 top, 2 bottom) First fix, wire to back box technology
-
A compact and unobtrusive sounder solution Reflective Sound Monitoring (RSM) Light is electronically monitored by the control panel Automatic self-test Indoor and outdoor versions Indoor models can be semi-flush or surface mounted including a choice of shallow or deep back box IP rated option has a deep surface back box Power and data from the loop. No additional wiring or power supplies required Built-in line isolator 16 selectable tones Realistic conventional bell tone 2 selectable volumes 2 selectable flash rates Select the tone volume and flash rate using panel configuration software Independent addressable control of the sounder and beacon Different tones can be used for pre alarm and class change Aesthetically pleasing rectangle wall mount option A locking pin/screw supplied which prevents unauthorized removal
-
Key Features:; Very bright VID beacon Ideal for many general signalling applications Can be grid mounted for industrial applications Five different lens colours available
-
A compact and discrete solution One point of installation for detector, sounder and visual indicator with no additional wiring Reflective Sound Monitoring (RSM) Light is electronically monitored by the control panel Automatic self-test Independent addressable control of the sounder and beacon Built-in line isolator Select the tone, volume and flash rate using panel configuration software 15 selectable tones. Allows users to select the tone with which they are most familiar Realistic conventional bell tone 4 selectable volumes 2 selectable flash rates Different tones can be used for fire alarm and class change VIDs and sounders are synchronised over the entire loop A locking pin supplied with the base which prevents the unauthorized removal of the detector Replace legacy LPSB3000 and LPAV3000
-
Key Features:; A compact and unobtrusive sounder solution Reflective Sound Monitoring (RSM) Automatic self-test Indoor and outdoor versions Indoor models can be semi-flush or surface mounted including a choice of shallow or deep back box IP rated option has a deep surface back box Power and data from the loop. No additional wiring or power supplies required Built-in line isolator 16 selectable tones Realistic conventional bell tone 2 selectable volumes Select the tone volume using panel configuration software Different tones can be used for fire alarm and class change Rectangle wall mount for an aesthetically pleasing option A locking pin/screw supplied which prevents unauthorized removal
-
A compact and discrete solution VAD approved to EN54-23 with two ranges, standard power and high power available High power option provides a larger VAD coverage volume compared to standard Reflective Sound Monitoring (RSM) Reflective Light Monitoring (RLM) Automatic self-test Shorter light pulse for faster response Optimise the system design for lowest power requirements and lowest cost installation Triple light source One point of installation for detector, sounder and visual indicator with no additional wiring Independent addressable control of the sounder and beacon Built-in line isolator Select the tone, volume and flash rate using panel configuration software 15 selectable tones. Allows users to select the tone with which they are most familiar. Realistic conventional bell tone 2 selectable volumes 2 selectable flash rates Different tones can be used for fire alarm and class change VADs and sounders are synchronised over the entire loop A locking pin supplied with the base which prevents the unauthorized removal of the detector Provides an EN54-23 approved upgrade path for legacy systems
-
Key Features:; A compact and unobtrusive sounder solution Reflective Sound Monitoring (RSM) Reflective Light Monitoring (RLM) Automatic self-test Shorter light pulse for faster response Indoor and outdoor versions Indoor models can be semi-flush or surface mounted including a choice of shallow or deep back box IP rated option has a deep surface back box for use with suitable IP-rated glands and cabling Power and data from the loop. No additional wiring or power supplies required Built-in line isolator 16 selectable tones Realistic conventional bell tone 2 selectable volumes 2 selectable flash rates Select the tone volume and flash rate using panel configuration software Independent addressable control of the sounder and beacon Different tones can be used for fire alarm and class change Rectangle wall mount for an aesthetically pleasing option A locking pin/screw supplied which prevents unauthorized removal
-
Key Features:; A compact and unobtrusive sounder solution Reflective Sound Monitoring (RSM) Reflective Light Monitoring (RLM) Automatic self-test Shorter light pulse for faster response Indoor and outdoor versions Indoor models can be semi-flush or surface mounted including a choice of shallow or deep back box IP rated option has a deep surface back box for use with suitable IP-rated glands and cabling Power and data from the loop. No additional wiring or power supplies required Built-in line isolator 16 selectable tones Realistic conventional bell tone 2 selectable volumes 2 selectable flash rates Select the tone volume and flash rate using panel configuration software Independent addressable control of the sounder and beacon Different tones can be used for fire alarm and class change Rectangle wall mount for an aesthetically pleasing option A locking pin/screw supplied which prevents unauthorized removal
-
Key Features:; Weight 228g Humidity: up to 95% (non- condensing) Operating temperature: -10 Celsius to +55 Use only with ZX/MX Fire Alarm Controllers
-
A compact and discrete solution One point of installation for detector, sounder and visual indicator with no additional wiring Reflective Sound Monitoring (RSM) Light is electronically monitored by the control panel Automatic self-test Independent addressable control of the sounder and beacon Built-in line isolator Select the tone, volume and flash rate using panel configuration software 15 selectable tones. Allows users to select the tone with which they are most familiar Realistic conventional bell tone 4 selectable volumes 2 selectable flash rates Different tones can be used for fire alarm and class change VIDs and sounders are synchronised over the entire loop A locking pin supplied with the base which prevents the unauthorized removal of the detector Replace legacy LPSB3000 and LPAV3000
-
A compact and unobtrusive sounder solution Reflective Sound Monitoring (RSM) Light is electronically monitored by the control panel Automatic self-test Indoor and outdoor versions Indoor models can be semi-flush or surface mounted including a choice of shallow or deep back box IP rated option has a deep surface back box Power and data from the loop. No additional wiring or power supplies required Built-in line isolator 16 selectable tones Realistic conventional bell tone 2 selectable volumes 2 selectable flash rates Select the tone volume and flash rate using panel configuration software Independent addressable control of the sounder and beacon Different tones can be used for pre alarm and class change Aesthetically pleasing rectangle wall mount option A locking pin/screw supplied which prevents unauthorized removal
-
Loop Powered - Reduced installation costs High Output/Low consumption - Lower lifetime costs Indoor and Outdoor models - Same sounder tones in all areas Sounder/LED Beacon Version - DDA Compliant 16 Tones and 2 Flash rates - Suits individual requirements Reflective Sound Monitoring RSM - Reassurance that ALL sounders are working Integral Line Isolator - Saves cost and installation time; Models Available
-
Key Features:; Weight 228g Humidity: up to 95% (non- condensing) Operating temperature: -10 Celsius to +55 Use only with ZX/MX Fire Alarm Controllers
-
A compact and discrete solution One point of installation for detector and sounder with no addition wiring Low power with up to 250 sounders on a single loop Provides uncompromised system design solutions Simple to select the tone and volume using switches No special training or tools needed 9 selectable tones 4 selectable volumes A locking pin supplied with the base which prevents the unauthorized removal of the detector Replace legacy 802sb and it is compatible with 800 series detectors. Can be used for service and repair or as part of a planned upgrade path
-
Key Features:; This product is not EN54-23 approved so can’t be used as a VAD EN54-3 approved Large cable access Rear or surface cable entry Loop continuity spring Automatic synchronisation of sounder and strobe Common base with detectors (B501AP) Device protocol is backward compatible through inclusion of both SS CLIP and Advanced Protocols 32 tone selection to cover many markets (on device or from panel) Positive “poke yoke” engagement Address tag for clear indication Anti-tamper feature In-built isolation options Simple familiar rotary wheel address controls
-
Key Features:; This product is not EN54-23 approved so can’t be used as a VAD EN54-3 approved Large cable access Rear or surface cable entry Loop continuity spring Automatic synchronisation of sounder and strobe Common base with detectors (B501AP) Device protocol is backward compatible through inclusion of both SS CLIP and Advanced Protocols 32 tone selection to cover many markets (on device or from panel) Positive “poke yoke” engagement Address tag for clear indication Anti-tamper feature In-built isolation options Simple familiar rotary wheel address controls
