-
Multiple technology sensor Combined smoke, heat and CO sensors Ideal multi-application sensor Integrated voice enhanced sounder Integrated high intensity LED beacon Seven selectable voice messages Loop powered / low current Programmable volume control Integral short circuit isolator -
Multiple Technology Sensor Combined Smoke, Heat and Carbon Monoxide Sensors Ideal Multi-Application Sensor Integrated EN54-23 Visual Alarm Device Loop Powered & Low Current Integral Short Circuit Isolator Unprecedented False Alarm Rejection VAD Classification Adjustable from 3m to 7.5m Room Coverage Volume
-
Multiple Technology Sensor Combined Smoke, Heat and Carbon Monoxide Sensors Integrated Electronic Sounder Integrated EN54-23 Visual Alarm Device Loop Powered & Low Current Programmable Volume Control Integral Short Circuit Isolator Unprecedented False Alarm Rejection VAD Classification Adjustable from 3m to 7.5m Room Coverage Volume
-
Multiple Technology Sensor Combined Smoke, Heat and Carbon Monoxide Sensor Integrated Voice Enhanced Sounder Integrated EN54-23 Visual Alarm Device Seven Selectable Voice Messages Loop Powered & Low Current Programmable Volume Control Integral Short Circuit Isolator Unprecedented False Alarm Rejection VAD Classification Adjustable from 3m to 7.5m Room Coverage Volume
-
Attention tones can be programmed to match system sounders Volume control for individual devices including ’Soft’ start option Uniform sound distribution at all angles Low current consumption with capacity for up to 125 units per loop Fully synchronised sound patterns via the control panel Voiced Enhanced option with selectable speech messages available to suit most requirements Rich harmonic sound output using patented technique Unique monitoring of sounder element to ensure operation in an emergency Output typically 90dB(A) @1m Self-monitoring to prevent overload of loop in event of cable fault; S-Quad Benefits:; Comprehensive range of analogue addressable fire sensors all within ONE device Supported and powered on the Vigilon Loop – only one set of terminations and one cable required for multisensor, sounder, speech and visual alarm functionality Increased loop alarm load capable of powering 200 sensor-sounders or 100 sensor-sounder VADs Built-in short circuit isolators in every device Monitored input facility – fire, fault, non-fire – reduces the installed cost of the system and reduces the need for separate interfaces Monitored repeat LED output Loop powered installation incorporating S-Quad requires no additional interfaces or extra monitored sounder circuits S-Quad’s intelligent design ensures quick and simple installation with more wiring space within the base
-
IP Rating: IP30 Approximate Weight: 0.11 Kg Operating Temperature: -10°C to +50°C Compliant to EN54 Part 7
-
Resettable Element Flush mounting Maximal 200 per loop Operating Temperature: -25°C to +70°C Approximate Weight: 0.11 Kg Device Load Factor is 1 IP Rating: IP43 Compliant to EN54 Part 11
-
Key Features:; New mechanical platform with revolutionary chamber offering improved false alarm immunity Includes Series 200 Advanced Protocol Available with or without single pole circuit isolation with status control through the Series 200 Advanced Protocol Tri colour LED offering red, green or amber colours Rotary decade address switches Pure white colour to compliment modern buildings 100% mechanical and electrical backwards compatibility New base design to compliment the detector
-
Key Features:; New mechanical platform with revolutionary chamber offering improved false alarm immunity Includes Series 200 Advanced Protocol Available with or without single pole circuit isolation with status control through the Series 200 Advanced Protocol Tri colour LED offering red, green or amber colours Rotary decade address switches Pure white colour to compliment modern buildings 100% mechanical and electrical backwards compatibility New base design to compliment the detector
-
Key Features:; Two sensor multi-criteria fire detector incorporating photoelectric, and thermal sensing elements New mechanical platform with revolutionary chamber Includes Series 200 Advanced Protocol Available with or without single pole short circuit isolation with status control through the Series 200 Advanced Protocol Tri colour LED offering red, green and amber colours Rotary decade address switches Pure white colour to compliment modern buildings 100% mechanical and electrical backwards compatibility New Base design to compliment the detector
-
Key Features:; Two sensor multi-criteria fire detector incorporating photoelectric, and thermal sensing elements New mechanical platform with revolutionary chamber Includes Series 200 Advanced Protocol Available with or without single pole short circuit isolation with status control through the Series 200 Advanced Protocol Tri colour LED offering red, green and amber colours Rotary decade address switches Pure white colour to compliment modern buildings 100% mechanical and electrical backwards compatibility New Base design to compliment the detector
-
Key Features:; Unique, true three sensor multi-criteria fire detector incorporating photoelectric, thermal and IR sensing elements Fully integrated Infra-Red sensing to support the fire alarm decision Includes Series 200 Advanced Protocol Available with or without single pole short circuit isolation with status control through the Series 200 Advanced Protocol Tri colour LED offering red, green, and amber colours Rotary decade address switches Pure white colour to compliment modern buildings 100% mechanical and electrical backwards compatibility New base design to compliment the detector
-
Key Features:; Unique, true three sensor multi-criteria fire detector incorporating photoelectric, thermal and IR sensing elements Fully integrated Infra-Red sensing to support the fire alarm decision Includes Series 200 Advanced Protocol Available with or without single pole short circuit isolation with status control through the Series 200 Advanced Protocol Tri colour LED offering red, green, and amber colours Rotary decade address switches Pure white colour to compliment modern buildings 100% mechanical and electrical backwards compatibility New base design to compliment the detector
-
Includes Series 200 Advanced Protocol and the ability to customise the heat threshold of each detector to the specific risks found in the application Available with or without single pole short circuit isolation with status control through the Series 200 Advanced Protocol Tri colour LED offering red, green, and amber colours Rotary decade address switch Pure white colour to compliment modern buildings 100% mechanical and electrical backwards compatibility New base design to compliment the detector
-
-
-
-
Universal Mode - EN54 pt.7 - CEA4021 - IS07240.7 Resilient Mode - EN54 pt.7 - CEA4021- IS07240.7 High Performance Optical - EN54 pt.7 - IS07240.7 Compensated CO Fire Sensing - LPS1265 - IS07240.6 Heat Detection - EN54 pt.5 A1R - IS07240.5 CO Toxic Gas Detection- EN50291
-
-
Key Features:; Unlike UV and UV/IR detection, not blinded by oil mist in machinery spaces Reduces cabling, no interface required No additional power source required Easy installation uses a common plug in base for smoke and heat detectors Can be used on all vessels as fully marine approved
-
Unlike UV and UV/IR detection, not blinded by oil mist in machinery spaces Reduces cabling, no interface required No additional power source required Easy installation uses a common plug in base for smoke and heat detectors Can be used on all vessels as fully marine approved
-
-
Over 20 fire detection modes Tyco MX FASTLOGIC Expert algorithms MX HPO detection Algorithms Up to 250 detectors per loop Remote detector verification & temperature read out Programmable alarm LED with 360o viewing angle Optional detector locking pin Variety of sounder and relay detector bases Address flag stays with the base Approved by all major classification societies for use on vessels Lower cost system design and installation as one detection type can be used throughout the vessel Lower cost of ownership as no radioactive source disposal costs together with less spares holding Enhanced safety in accommodation areas by using the unique Carbon Monoxide (CO) detectors Major Cable saving options using loop powered ancillaries Allows easier decision making by operator because of remote temperature and smoke density read-out
-
Key Features:; Over 20 fire detection modes Tyco MX FASTLOGIC Expert algorithms MX HPO detection Algorithms Up to 250 detectors per loop Remote detector verification & temperature read out Programmable alarm LED with 360o viewing angle Optional detector locking pin Variety of sounder and relay detector bases Address flag stays with the base Approved by all major classification societies for use on vessels Lower cost system design and installation as one detection type can be used throughout the vessel Lower cost of ownership as no radioactive source disposal costs together with less spares holding Enhanced safety in accommodation areas by using the unique Carbon Monoxide (CO) detectors Major Cable saving options using loop powered ancillaries Allows easier decision making by operator because of remote temperature and smoke density read-out
-
Advanced multi-sensor designs Built-in line isolator (850H Only) Quick and easy to install Extended drift compensation Two way infra-red communication to the 850EMT Engineering Management Tool Fire, isolate and fault LED indications Any Pantone colour available with CPD approval Comprehensive range of bases and base accessories
-
Advanced multi-sensor designs Built-in line isolator (850P Only) Quick and easy to install Extended drift compensation Two way infra-red communication to the 850EMT Engineering Management Tool Fire, isolate and fault LED indications Any Pantone colour available with CPD approval
-
Advanced multi-sensor designs Built-in line isolator (850 only) Quick and easy to install Extended drift compensation Two way infra-red communication to the 850EMT Engineering Management Tool Fire, isolate and fault LED indications Any Pantone colour available with CPD approval Comprehensive range of bases and base accessories
-
Advanced multi-sensor designs Built-in line isolator (850PH Only) Quick and easy to install Extended drift compensation Two way infra-red communication to the 850EMT Engineering Management Tool Fire, isolate and fault LED indications Any Pantone colour available with CPD approval
-
Advanced multi-sensor designs Built-in line isolator (850H Only) Quick and easy to install Extended drift compensation Two way infra-red communication to the 850EMT Engineering Management Tool Fire, isolate and fault LED indications Any Pantone colour available with CPD approval Comprehensive range of bases and base accessories
-
Advanced multi-sensor designs Built-in line isolator (850P Only) Quick and easy to install Extended drift compensation Two way infra-red communication to the 850EMT Engineering Management Tool Fire, isolate and fault LED indications Any Pantone colour available with CPD approval
-
Advanced multi-sensor designs Built-in line isolator (850 only) Quick and easy to install Extended drift compensation Two way infra-red communication to the 850EMT Engineering Management Tool Fire, isolate and fault LED indications Any Pantone colour available with CPD approval Comprehensive range of bases and base accessories
-
Advanced multi-sensor designs Built-in line isolator (850PH Only) Quick and easy to install Extended drift compensation Two way infra-red communication to the 850EMT Engineering Management Tool Fire, isolate and fault LED indications Any Pantone colour available with CPD approval
-
Advanced multi-sensor designs Built-in line isolator (851PH Only) Quick and easy to install Extended drift compensation Two way infra-red communication to the 850EMT Engineering Management Tool Fire, isolate and fault LED indications Any Pantone colour available with CPD approval Comprehensive range of bases and base accessories
-
Advanced multi-sensor designs Built-in line isolator (851PH Only) Quick and easy to install Extended drift compensation Two way infra-red communication to the 850EMT Engineering Management Tool Fire, isolate and fault LED indications Any Pantone colour available with CPD approval Comprehensive range of bases and base accessories
-
Advanced array based detector Powerful signal processing on DSP with algorithms to give reliable flame detection Detection range: Over 50m for 0.1m2 n-heptane pan fire Field of view: 90° horizontal, 85° vertical with full range maintained High immunity to false alarms Solar blind Masking of areas in field of view Automatic optical path monitoring Advanced self-test and service features Built-in video camera (option): View protected area with alarm location and status overlay IEC 61508 Approved (SIL2)
-
Advanced array based detector Powerful signal processing on DSP with algorithms to give reliable flame detection Detection range: Over 50m for 0.1m2 n-heptane pan fire Field of view: 90° horizontal, 85° vertical with full range maintained High immunity to false alarms Solar blind Masking of areas in field of view Automatic optical path monitoring Advanced self-test and service features Built-in video camera (option): View protected area with alarm location and status overlay IEC 61508 Approved (SIL2)
